Contact Platform Support
Help CenterALSTOM MCTI40N1AB0751G – Control Interface Module for Traction and Converter Systems
Related Products
-
ALSTOM MLU VER.A01 Main Logic Unit – Reliable Central Control for Legacy ALSTOM CabinetsUS$ 3660.00MOQ: 1 Combo -
ALSTOM MVAA14B1AA0785C Control Board – OEM Plug‑in Module for Legacy ALSTOM Drive and Automation CabinetsUS$ 3660.00MOQ: 1 Combo
-
ALSTOM MVAJ23B1AB0757B – Heavy‑Duty Auxiliary/Tripping Relay for Protection PanelsUS$ 3660.00MOQ: 1 Combo
-
ALSTOM MVAJ21L1GB0771B – Heavy‑Duty Auxiliary/Tripping Relay for Protection PanelsUS$ 3660.00MOQ: 1 Combo
-
ALSTOM MVAJ27L1FB0784D – Heavy‑Duty Trip/Auxiliary Relay for Protection and Control PanelsUS$ 3660.00MOQ: 1 Combo
Warranty: 365 days
Lead time: 1 week for in‑stock items; no more than one month at the latest
Payment terms: 50% advance payment; full payment before delivery
Express delivery: FedEx, UPS, DHL
Traceability: We record serial/part numbers and revision codes to match your fleet documentation
Rugged board design: Built for shock, vibration, and temperature swings commonly found in rail environments.
24 VDC control power: Typically powered from the vehicle’s 24 VDC auxiliary supply for simple integration.
Mixed I/O handling: Isolated digital inputs/outputs with conditioned analog feedback (voltage/current) for converter monitoring.
Backplane connectivity: Plugs into Alstom control racks; keyed connectors help prevent mis‑insertion during maintenance.
Service diagnostics: Status LEDs and a service serial port are commonly provided for fast fault tracing.
Conformal coating: Protective lacquer seems to be used on most builds to resist humidity and conductive dust.
Firmware‑tuned behavior: Parameters are typically managed by the system firmware, keeping field adjustments to a minimum.
| Brand / Model | ALSTOM MCTI40N1AB0751G |
| HS Code | 8537.10 (boards/panels for electric control, ≤1000 V) |
| Power Requirements | 24 VDC nominal (typically 18–32 VDC operating range) |
| Operating Temperature | -25°C to +70°C (railway service conditions, convection‑cooled) |
| Signal I/O Types | Isolated digital inputs/outputs; conditioned analog feedback channels (current/voltage); interlock/status lines |
| Communication Interfaces | Proprietary backplane interface; service serial port such as RS‑485/RS‑232 (availability depends on build revision) |
| Installation Method | Plug‑in control board for enclosed card cage within a traction/converter cabinet |
This module is typically specified for rolling stock traction and auxiliary power systems where reliable I/O conditioning and converter interlocks are required. Use cases we see most often:
Traction converter control on EMUs, locomotives, metro cars, and LRVs
Static inverters and auxiliary converters (HVAC, compressors, on‑board services)
Retrofit programs on legacy Alstom platforms needing form‑fit‑function replacements
Depot diagnostics rigs for board‑level testing and fleet support
A maintenance lead at a metro depot told us they swapped an MCTI board and were back online in under 20 minutes; the keyed connectors and clear LED states made it hard to get wrong, even during a night shift.
Form‑fit compatibility: Keeps wiring and backplane unchanged, which typically avoids costly re‑engineering.
Reduced downtime: Stock availability and clear diagnostics help fast restoration after a trip event.
Risk management: Genuine spec parts minimize interoperability issues with Alstom converter logic.
Lifecycle support: We can align the board revision to your fleet’s firmware baseline to prevent nuisance faults.
Transparent logistics: Firm lead times and documented test reports before shipment.
Cabinet conditions: Install in a sealed control cabinet with adequate ventilation; avoid direct water spray or conductive dust.
Power and grounding: Supply clean 24 VDC; follow vehicle bonding/earthing schemes to limit EMC‑related trips.
Wiring: Use original backplane connectors; verify pinout and keying before insertion. Always de‑energize and observe ESD precautions.
Commissioning: After installation, check status LEDs, backplane health, and interlocks. A brief power cycle test is usually performed.
Routine maintenance: Quarterly visual inspection for connector seating and contamination; light dry air cleaning if needed.
Calibration/firmware: Parameter handling is typically firmware‑controlled; any updates should be performed by authorized personnel using the service port/tools approved for your fleet.
Standards (typical for rolling stock electronics): EN 50155 (rolling stock electronics), EN 50121‑3‑2 (EMC), EN 45545 (fire safety) – exact conformity depends on the build record.
Regulatory: CE marking and RoHS compliance where applicable to the final application.
Quality system: Manufactured within ISO 9001 environments, with lot traceability retained.
Warranty: 365 days standard coverage.
If you can share the installed converter type and any existing board markings, we’ll match the MCTI40N1AB0751G revision precisely and confirm firmware compatibility before shipping.
Send Inquiry to This Supplier
You May Also Like
-
ALSTOM MVAJ13D1GB0780A – Heavy‑duty Auxiliary Tripping Relay for Protection and Lockout SchemesUS$ 3660.00MOQ: 1 Combo
-
ALSTOM MVAW11B1AB0513A – Heavy‑duty Auxiliary/Tripping Relay for Protection & Switchgear PanelsUS$ 3660.00MOQ: 1 Combo
-
ALSTOM MVAJ53H1LB0856A – Heavy‑Duty Auxiliary Tripping Relay for Substation and Industrial ProtectionUS$ 4660.00MOQ: 1 Combo
-
ALSTOM MVAW11B1AB9007A – Auxiliary Protection Relay for Trip/Interlock Duties in Power SystemsUS$ 3660.00MOQ: 1 Combo
-
ALSTOM MVAX31C1DF0754A – Rack‑mount Control Module for Alstom Legacy Automation and Protection SystemsUS$ 3660.00MOQ: 1 Combo
-
ALSTOM MVAX12B1DA0753A – Plug‑in I/O Module for MVAX Automation and Protection SystemsUS$ 3660.00MOQ: 1 Combo
-
ALSTOM MVTT14B1BA0773C – Plug‑In Turbine Control Module for Legacy ALSTOM RacksUS$ 3660.00MOQ: 1 Combo
-
ALSTOM MVTU11K1CD0751G – Voltage Transducer/Measurement Module for Protection and Control SystemsUS$ 3660.00MOQ: 1 Combo
-
ALSTOM N70032702L – Plug-in Control Board for Rail and Industrial Control CabinetsUS$ 3660.00MOQ: 1 Combo
-
ALSTOM ECPU_1 (N895600512D / N895600051C / N895600200Q) – Central Processor Module for Legacy Control and Protection RacksUS$ 3660.00MOQ: 1 Combo
