Contact Platform Support
Help CenterABB MPRC086444-005 Industrial Control Module – Reliable Spare for ABB Automation Racks
Related Products
-
ABB MRK000284-ABR02 – OEM Spare Kit for ABB Industrial Robots and Control CabinetsUS$ 660.00MOQ: 1 Combo -
ABB NTR002-A – Network Terminator for Stable RS-485/Fieldbus CommunicationUS$ 1360.00MOQ: 1 Combo
-
ABB KVC758A124 – Control Board for ABB Industrial Drive SystemsUS$ 3360.00MOQ: 1 Combo
-
ABB O3EGb (HENF315118R2) – Original ABB Operator/selector Component for Control Panels and MachineryUS$ 1360.00MOQ: 1 Combo
-
ABB O3EEb (HENF318176R1) – Replacement Control Electronics Board for ABB Industrial SystemsUS$ 1360.00MOQ: 1 Combo
Warranty: 365 days
Delivery: 1 week if in stock; no more than one month at the latest
Payment: 50% advance payment, full balance prior to delivery
Express options: FedEx, UPS, DHL
Backplane-powered design – Draws power from the system rack; no external supply wiring needed.
Backplane data interface – All I/O and communications pass through the ABB proprietary bus, reducing field wiring complexity.
Service-friendly replacement – Typically a direct, form-fit replacement that keeps existing configurations intact.
Rack-mount plug-in form factor – Installs into the designated slot with front-panel securing; straightforward for maintenance teams.
Lifecycle continuity – Helps extend the life of installed ABB systems and avoid disruptive migrations.
| Brand / Model | ABB MPRC086444-005 |
| HS Code | 8538.90 – Parts suitable for use with industrial control panels/apparatus of 8537 |
| Power Requirements | Powered via system backplane; no external power connection |
| Operating Temperature | Designed for standard control cabinet environments; typically supported 0–55°C in ABB racks (confirm by hardware revision) |
| Signal I/O Types | No direct field terminals; all signals via rack/backplane interface |
| Communication Interfaces | Proprietary ABB backplane bus; maintenance/service header may be present depending on revision |
| Installation Method | Plug-in module for ABB system rack; secure with front-panel hardware; insert/remove with cabinet power off and ESD protection |
| Dimensions & Weight | Single-slot module form factor; refer to ABB rack drawing for exact outline |
Plants typically use MPRC-series boards in ABB automation racks for process and factory control tasks. Common scenarios include:
Continuous process lines in chemicals, pulp & paper, metals, and power generation
Batch systems and utilities (boilers, water treatment, HVAC) within industrial facilities
Modernizations where exact-fit spares are needed to stabilize legacy ABB nodes
One thing I appreciate is how a drop-in spare like this lets maintenance teams recover quickly after a fault—often without touching logic or field terminations.
Risk reduction – Direct replacement minimizes reconfiguration and commissioning time.
Compatibility – Designed for ABB racks and backplane signaling; typically no wiring changes.
Cost control – Extends system lifecycle and avoids unplanned migrations.
Support – Technical guidance and a 365-day warranty provide peace of mind.
Environment – Install in a closed, ventilated control cabinet; keep within typical ABB cabinet temperature/humidity limits.
Power-down replacement – For safety and to protect the backplane, power off the rack before insertion/removal.
ESD handling – Use a grounded wrist strap; handle by edges and avoid touching components.
Slot & revision check – Match the slot address and verify firmware/hardware revision compatibility with your controller.
Routine care – Periodic cabinet dust removal, connector reseating during planned outages, and configuration backups are recommended.
A maintenance manager from a paper mill mentioned that keeping one MPRC086444-005 on hand “cut our restart time from hours to under 30 minutes” after a rare board failure—seems to be a common story in continuous processes.
Supporting ComponentsThis module is intended to operate within an ABB system rack. Typical associated parts include:
System rack/backplane compatible with your ABB controller family
Rack power supply module (backplane-powered distribution)
Controller CPU module and any required I/O carriers
Front-panel fastening kit and ESD service accessories
If you share your rack type or controller family, I can confirm slot compatibility and any firmware prerequisites before shipment.
Quality & CertificationsManufacturer conformity: ABB production standards; typically CE-marked for industrial environments
RoHS/UL/CSA: In many cases applicable for ABB rack modules; verify against the exact hardware label/CoC
Warranty: 365 days replacement coverage
Send Inquiry to This Supplier
You May Also Like
-
ABB P4LQA (HENF209736R0003) – Panel‑mount Industrial Control Accessory for Reliable Operator StationsUS$ 5360.00MOQ: 1 Combo
-
ABB P7LA HNEF105323R0002 – Plug‑in Relay Base for Clean PLC/Field IsolationUS$ 2360.00MOQ: 1 Combo
-
ABB PDD200A101 (3BHE019633R0101) – Signal Conditioning/I‑O Board for ABB Drive Control RacksUS$ 1360.00MOQ: 1 Combo
-
ABB PDD205A1121 (3BHE025335R1121) – Gate/Power Driver Board for ABB AC DrivesUS$ 1360.00MOQ: 1 Combo
-
ABB PFCA401 – Compact Fieldbus Communication Adapter for ABB Control SystemsUS$ 2360.00MOQ: 1 Combo
-
ABB PDD500A101 (3BHE037649R0101) – Industrial Control Driver Board for ABB Power Converter and Excitation PlatformsUS$ 1360.00MOQ: 1 Combo
-
ABB PFCA401SF – Fieldbus Communication Adapter for Reliable DCS/PLC ConnectivityUS$ 2360.00MOQ: 1 Combo
-
ABB B3EA (HENF315147R1) Control Board – OEM Plug-in PCB for ABB Drive and Controller PlatformsUS$ 4216.00MOQ: 1 Blade
-
B5EC HENF105077R1 – Panel Temperature Controller (E5EC-series Variant) for Precise Thermal ControlUS$ 4216.00MOQ: 1 Blade
-
HENF105082R4 (B5EEd) Industrial Control Board – Field‑replaceable Module for Drive/robotics CabinetsUS$ 4216.00MOQ: 1 Blade
