Contact Platform Support
Help CenterABB MRK000284-ABR02 – OEM Spare Kit for ABB Industrial Robots and Control Cabinets
Related Products
-
ABB NTR002-A – Network Terminator for Stable RS-485/Fieldbus CommunicationUS$ 1360.00MOQ: 1 Combo -
ABB KVC758A124 – Control Board for ABB Industrial Drive SystemsUS$ 3360.00MOQ: 1 Combo
-
ABB O3EGb (HENF315118R2) – Original ABB Operator/selector Component for Control Panels and MachineryUS$ 1360.00MOQ: 1 Combo
-
ABB O3EEb (HENF318176R1) – Replacement Control Electronics Board for ABB Industrial SystemsUS$ 1360.00MOQ: 1 Combo
-
ABB P4LQA (HENF209736R0003) – Panel‑mount Industrial Control Accessory for Reliable Operator StationsUS$ 5360.00MOQ: 1 Combo
Warranty: 365 days
Delivery time: 1 week when in stock; no more than 1 month at the latest
Payment: 50% advance payment; full payment before delivery
Express delivery: FedEx, UPS, DHL
Genuine ABB kit (MRK-series): Factory-configured assembly for consistent fit and performance in ABB control systems.
Revision ABR02: You might notice the ABR02 suffix; in many cases this indicates a controlled revision level for stable interchangeability.
Plug-and-replace form factor: Typically installs directly in the designated slot or mounting location, keeping downtime low.
ESD-safe packaging: Shipped in protective, anti-static materials to preserve component integrity during transit and handling.
Traceability: Serial/lot tracking supports maintenance logs and audits, which many factories need for compliance.
Procurement-friendly lead time: Balanced stock strategy and fast courier options help when you’re under a tight shutdown window.
| Brand / Model | ABB MRK000284-ABR02 |
| Product Type | OEM spare/repair kit for ABB industrial robot controllers and control cabinets |
| HS Code | 8538.90 (Parts for industrial electrical control equipment) |
| Power Requirements | Not standalone; receives power/signals from the host system (no separate PSU) |
| Operating Temperature | 0 to +55 °C in a ventilated control cabinet (typical for ABB controller environments) |
| Signal I/O Types | Not exposed at kit level; I/O handled via the host backplane/connectors |
| Communication Interfaces | None at kit level; uses internal system interconnects as per the controller design |
| Installation Method | Direct replacement in OEM location (panel or subrack); observe ESD and lockout procedures |
| Packaging | ESD-safe bag with foam cushioning; sealed for transit |
This kit is typically used in ABB robot controllers and automation cabinets across:
Automotive body-in-white, paint, and powertrain lines
Electronics assembly and material handling cells
Packaging, palletizing, and intralogistics systems
General machinery and CNC tending workcells
Food & beverage and fast-moving consumer goods automation
Reliability: Genuine ABB components usually deliver the fit and longevity maintenance teams expect.
Compatibility: Revision-controlled (ABR02) for consistent replacement behavior in matched systems.
Lower downtime risk: Plug-and-replace design means faster swap and quicker restart.
Cost control: Predictable lead times and 12-month coverage help plan budgets around maintenance events.
Technical support: We can assist with part verification against your controller serial and BOM to avoid mismatch.
Environment: Install inside a clean, ventilated cabinet (IEC/EN 61439 practices). Keep ambient 0–55 °C, humidity non-condensing.
Safety: Power down the controller and follow lockout/tagout. Use ESD wrist straps and insulated tools.
Wiring: Route cables per the original harness path; avoid bending radii violations and EMI-sensitive runs.
Mechanical fit: Seat connectors fully, check latch/retainer engagement, and use specified torque on any mounting screws.
Commissioning: If the kit includes electronics, back up system data first and confirm firmware/revision alignment after install.
Routine care: Periodically inspect for dust buildup; clean with dry air; verify connector tightness during scheduled shutdowns.
Manufactured under ISO 9001 quality systems (ABB production standards)
CE and RoHS compliance when installed in conforming ABB systems
REACH alignment for substances of very high concern (SVHC), as applicable
365-day warranty from delivery date
If you’re refreshing a controller bay, teams often review adjacent items at the same time: ABB DSQC-series I/O modules, power supply units, FlexPendant/teach pendant assemblies, system backplanes, and cooling fans/filters. Bundling replacements can save a second shutdown later.
One thing I appreciate is how ABB keeps revision control tight—if you share your controller type and serial, we can double-check MRK000284-ABR02 against the original BOM so you get a clean, first-time fit.
Send Inquiry to This Supplier
You May Also Like
-
ABB P7LA HNEF105323R0002 – Plug‑in Relay Base for Clean PLC/Field IsolationUS$ 2360.00MOQ: 1 Combo
-
ABB PDD200A101 (3BHE019633R0101) – Signal Conditioning/I‑O Board for ABB Drive Control RacksUS$ 1360.00MOQ: 1 Combo
-
ABB PDD205A1121 (3BHE025335R1121) – Gate/Power Driver Board for ABB AC DrivesUS$ 1360.00MOQ: 1 Combo
-
ABB PFCA401 – Compact Fieldbus Communication Adapter for ABB Control SystemsUS$ 2360.00MOQ: 1 Combo
-
ABB PDD500A101 (3BHE037649R0101) – Industrial Control Driver Board for ABB Power Converter and Excitation PlatformsUS$ 1360.00MOQ: 1 Combo
-
ABB PFCA401SF – Fieldbus Communication Adapter for Reliable DCS/PLC ConnectivityUS$ 2360.00MOQ: 1 Combo
-
ABB B3EA (HENF315147R1) Control Board – OEM Plug-in PCB for ABB Drive and Controller PlatformsUS$ 4216.00MOQ: 1 Blade
-
B5EC HENF105077R1 – Panel Temperature Controller (E5EC-series Variant) for Precise Thermal ControlUS$ 4216.00MOQ: 1 Blade
-
HENF105082R4 (B5EEd) Industrial Control Board – Field‑replaceable Module for Drive/robotics CabinetsUS$ 4216.00MOQ: 1 Blade
-
ABB CI570 3BSE001440R1 – Main Fieldbus Controller for FOUNDATION Fieldbus H1 SegmentsUS$ 4216.00MOQ: 1 Blade
