Contact Platform Support
Help CenterABB DYTP600A (61430001-ZY) Touch Panel HMI – Reliable 6-inch Operator Interface for Machine and Process Control
Related Products
-
ABB EI803F (3BDH000017R1) – S800 I/O Interface Module for 800xA/Advant SystemsUS$ 1360.00MOQ: 1 Combo -
ABB EI802F 3BDH000016R1 – Ethernet Interface Module for AC 800F / Freelance Controller NetworksUS$ 1360.00MOQ: 1 Combo
-
ABB EI801F (3BDH000015R1) – Ethernet Interface Module for AC 800F / Freelance SystemsUS$ 1360.00MOQ: 1 Combo
-
ABB EI811F (3BDH000020R1) – Ethernet Interface Module for ABB Freelance/AC 800F Control NetworksUS$ 1360.00MOQ: 1 Combo
-
ABB FC95-22 (HESG440295R2 / HESG448688R22) – Procontrol P14 Control Module for Reliable DCS OperationUS$ 1360.00MOQ: 1 Combo
Warranty: 365 days
Delivery time: 1 week if in stock; no more than one month at the latest
Payment: 50% advance payment; full payment prior to delivery
Express options: FedEx, UPS, DHL
6-inch class touchscreen – A practical size for machine‑level HMI pages, trend views, and alarm lists without crowding the panel layout.
24 VDC, panel‑mount design – Standard power and installation method for industrial cabinets; keeps retrofits simple.
Ethernet and serial connectivity – Typically supports Ethernet (RJ45) and RS‑232/RS‑485 for linking PLCs, drives, or gateways.
IP65 front (when properly mounted) – Front‑panel protection suited for dusty environments and wash‑down splash in many cases.
Operator‑focused runtime – Stable performance for setpoint changes, alarm acknowledgment, and basic diagnostics.
Serviceability – Easy power, grounding, and cable access; straightforward field swap helps reduce downtime.
| Brand / Model | ABB DYTP600A |
| Manufacturer Part No. | 61430001-ZY |
| Product Type | Industrial HMI touch panel (6-inch class) |
| HS Code | 8537.10 (Boards, panels, consoles for electric control, not exceeding 1,000 V) |
| Power Requirements | 24 VDC nominal (typical for ABB operator panels) |
| Operating Temperature | 0 to +50 °C (typical) |
| Signal Input/Output Types | No onboard I/O; communicates with controllers via network/serial links |
| Communication Interfaces | Ethernet (RJ45); RS‑232/RS‑485; USB (availability may vary by revision) |
| Installation Method | Panel mounting with rear clips and gasket; proper grounding; IP65 front when correctly installed |
The DYTP600A typically serves in machine control panels, packaging lines, conveyors, compact skids (water/wastewater dosing, boiler, and HVAC), small cell robotics HMIs, and drive/MCC operator stations. One thing I appreciate is how comfortably it fits upgrade projects—especially when the goal is to restore HMI functionality without re‑engineering the whole cabinet.
Reliability: Stable runtime and predictable boot behavior help minimize nuisance downtime.
Compatibility: Works with common PLC/drives links over Ethernet or serial; avoids protocol lock‑in in many cases.
Cost control: Keeps replacement scope tight—often no need to re‑cut panels or redo wiring.
Lead time: Stock‑friendly part for maintenance teams; supports quick turnaround replacements.
Support: We can assist with selection, revision checks, and basic migration guidance.
Feedback from a maintenance supervisor in a food plant: “We swapped in the DYTP600A during a lunch break. Ethernet and 24 VDC went straight in, and the line was back up fast. No messy panel rework.”
Panel & environment: Mount on a flat, rigid panel with the supplied gasket; allow ventilation to avoid heat pockets; separate power and signal wiring to reduce noise.
Power & grounding: Use a clean 24 VDC supply; bond protective earth to the panel; keep cable shields terminated properly.
Wiring: Keep Ethernet and serial cables away from high‑voltage runs; use ferrules; verify strain relief to avoid connector stress.
Safety: Power down the cabinet before installation; observe ESD handling to protect electronics.
Routine care: Periodically clean the front surface (non‑abrasive); back up the HMI project; review firmware updates when available and validated for your revision.
CE and RoHS compliant
Typically UL/cUL recognized for industrial control equipment
Manufactured under ISO 9001 quality systems
Warranty: 12 months (365 days)
If you’re replacing an existing DYTP600A or planning a like‑for‑like HMI refresh, share your current panel photos or the unit label. A quick revision check usually prevents surprises and keeps the swap predictable.
Send Inquiry to This Supplier
You May Also Like
-
ABB EI812F (3BDH000021R1) – Ethernet Interface Module for Freelance AC 800F Control SystemsUS$ 1360.00MOQ: 1 Combo
-
ABB EST125-975 + DCC2382A – Motor Feedback and Control Interface for ABB Drive SystemsUS$ 2360.00MOQ: 1 Combo
-
ABB G3ESa (HENF318736R1) – Original Spare Module for ABB Automation CabinetsUS$ 4360.00MOQ: 1 Combo
-
ABB GCC960C103 (3BHE033067R0103 / 3BHE033068P106) – Gate Control Card for ABB Medium-Voltage Drive Gate UnitsUS$ 2360.00MOQ: 1 Combo
-
ABB GCD207B101 (3BHE024642R0101) – Gate Control/Driver Board for ABB High-Power Drive SystemsUS$ 2360.00MOQ: 1 Combo
-
ABB GCC960C102 (3BHE033067E0102) With 3BHE033068P106 – Generator/Excitation Control Module for Reliable AVR SystemsUS$ 4360.00MOQ: 1 Combo
-
ABB FI810F (3BDH000030R1) – PROFIBUS DP-V1 Fieldbus Interface for Freelance AC 800FUS$ 4360.00MOQ: 1 Combo
-
ABB GD9924BE V2 (HIEE401091R0002) – Plug‑in Controller Interface Board for Advant OCS RacksUS$ 4360.00MOQ: 1 Combo
-
ABB GDC801B101 (3BHE051592R0101) – Gate Drive Controller Board for ABB Medium-voltage Drive StacksUS$ 4360.00MOQ: 1 Combo
-
ABB GDC806A0101 (3BHE028761R0101) – Gate Drive Controller Board for High-Power/Medium-Voltage Drive SystemsUS$ 4360.00MOQ: 1 Combo
