MDJ-300S Solid Density Tester

The solid density tester MDJ-300S adopts a German HBM imported sensor for better measurement repeatability. It can directly read the density of any solid, particle, or floating material in two steps, making it easy to operate PC material sink, wear-resistant and drop resistant, corrosion-resistant, 0.5cm stainless steel suspension wire, not bent or deformed, perpendicular to the suspension bar and not touching the sink, can determine the percentage of main material content

The solid density tester MDJ-300S is used in research laboratories for new materials such as solid materials, rubber, wires and cables, aluminum products, plastic PVC particles, powder metallurgy, mineral rocks, EVA foam materials, glass industry, metal products, precision ceramics, refractory materials, magnetic materials, alloy materials, mechanical parts, metal recycling, minerals and rocks, cement manufacturing, jewelry industry, etc

Solid density meter meets the requirements ASTM D792、 ASTM D297、 GB/T1033、GB/T2951、 GB/T3850、 GB/T533、 HG4-1468、 JIS K6268、 ISO 2781、ISO 1183、GB/T208、GB/T5163、GB/T 1933、BS2782 Part 6 Method 620D, ASTM D1505-68, ISO 1183  And other standards

Technical parameters:

1. Model: MDJ-300A MDJ-600A MDJ-1200A MDJ-300S MDJ-600S

2. Density analysis: 0.001 g/cm3 0.001 g/cm3 0.001 g/cm3 0.001 g/cm3 0.001 g/cm3 0.001 g/cm3

3. MAX weighing: 300 g               600g                1200g                300g                    600g

4. MIN weighing: 0.01 g               0.01g                0.01g                0.005g                  0.005g

5. Density measurement range: 0.001-99.999g/cm3

6. Measurement type: Any block, particle, or floating object with irregular density greater than or less than 1

7. Testing principle: Archimedes buoyancy method

8. Testing time: 5-20 seconds

9. Calibration method: single key weight calibration, automatic detection

10. Display value: weight g, density g/cm3, volume cm3, percentage%

The main functions of the solid density tester MDJ-300S are:

1. It has the function of direct reading density and volume measurement, and can automatically display without calculation

2. It can set the upper and lower limits of density, automatically determine whether the product is qualified, and has a prompt function

3. Using water as the medium, other liquid media can also be used [solution compensation function]

4. Equipped with actual water temperature setting function [temperature compensation function]

5. Adopting an integrated large capacity PC measuring water tank (length 15.3 x width 10.7 x height 8.0cm), it is corrosion-resistant and more convenient for testing large solids. Different sizes of water tanks can be customized according to the size of the measured product

6. Built in rechargeable battery, equipped with windproof cover, more suitable for on-site testing

7. Equipped with RS-232C communication interface, convenient for connecting PC and printer. XF-68 printer can be selected to print measurement data

Standard accessories:

① Density meter host ② measuring water tank ③ density measuring table ④ tweezers ⑤ power transformer ⑥ calibration weight ⑦ windproof and dustproof cover ⑧ measuring particle accessories set (tennis ball, beaker) ⑨ measuring float accessories set (anti floating frame) ⑩ certificate manual

Optional accessories: ① XF-68 densitometer printer ② Computer data connection cable

Product measurement steps:

① Place the product on the measuring table, measure the weight in the air, and press the ENTER key to memorize.

② Place the product in water to measure its weight, press the ENTER key to memorize, and display the density value.