Contact Platform Support
Help CenterWodon OEM Support General Corrosion Resistant Flux Core Wire E71T-GS Brass Copper Steel Silver Chromium Alloy Mig Welding Wire
Related Products
-
Wodon Customizable Hardfacing Roller Welding Wire Chrome Alloy Flux Core for Metal Brass Aluminum-MIG Type for OEMUS$ 2.83 - 2.83MOQ: 1 Kilogram -
China Factory High Temperature Resistant Flux Core Wire for Hardfacing WeldingUS$ 8.54 - 8.54MOQ: 1 Kilogram
-
Mig Welding Wire Flux Cored Welding Wire for SaleUS$ 5 - 5MOQ: 1 Kilogram
-
Wodon Wear Resistant Hardfacing Welding Wire With Flux CoredUS$ 3.56 - 3.56MOQ: 1 Kilogram
-
Cement Squeeze Roller Open Arc Wear Resistant Hardfacing Welding Wire 2.8mmUS$ 9.9 - 9.9MOQ: 1 Kilogram
Wodon general corrosion resistant flux core wire with chromium alloy
We developed our own flux cored welding wire with customized ingredient for all kinds of working conditions. Our welding wires has following advantages:
1. smooth wire feeding, stable arc , uniform diameter
2. less patter and smoke during welding, above 90% hardfacing efficiency
3. every drum packed with one whole PC of welding wires, without any joint, no broken arc phenomena during the welding to improve production efficiency
4. developing more than 100 kinds of flux cored wear resistant requirements of many wear resistant field which can satify the wear resistant requirements of many wear resistant parts under all kinds of working conditions.
5. the base metal and the wear resistant overlay are metallurgical bonding; after welding, the wear resistant layer doesn't fall off because of uniform stress relief.
We can provide qualification certificate, product data sheet, test report including chemical compostion, hardness, etc of wear resistant overlay.
gas shielding welding wire
flux cored welding wire
|
Model |
Spec. (mm) |
Hardness (HRC) |
Main Ingredient (%) |
|
HB-YD313 |
1.6 |
45-50 |
C: 0.2-0.3 Cr: 11-14 |
|
Main Application |
Used for continuous casting roller surfacing. |
||
After cutting and joining into the steel strip with our fixed width, the roller squeezes our steel strip into "U Type" form and filled up with flux powder with our own special ingredient. The primary flux cored welding wire are continuously to stretch through the different diameter of the abrasive tool. After that, our flux cored welding wires are going to be packeted without a joint into Drum or Spool with waterpoof and desiccant. During the process and after process we have strickly inspection policy about the filling rate, bending rate, chemical composition and welding perform etc.
1. Chemical Composition: High manganese high chromium
2. Hardness: HRC 50-55
3. Good Performance: no clearing slag, low welding spatter, smooth surface, high welding efficiency, stable filling rate, etc.
4. welding wire without any joints.
5. Production Capacity: 9000 tons per year
6. Short Delivery Time: Generally 7 days
7. We have many experienced professionals to research and develop welding wires according to customers' specified chemical compositions.
8. We can recommend proper welding wires and provide technical solutions based on working conditions.
9. on site inspection and third party inspection are available.
10. As an ISO9001:2008 approved manufacture, our mission is to improve our management system and provide high quality products continuously.
We have our own Quality Inspection Technology Department and the team are made of many experience exports with material science bachelor-degree and the leaders with material science master-degree. In the pictures you can also see our equipment in our laboratory. Our inspection team make regular testing on raw material, production process and our products according our company's strict policy.
In our Laboratory there are the Rockwell Hardness tester to test the Hardness of the small welding samples, the portable Spectrum to test the chemical compostion easily at the work pieces on the scene, the portable Hardness tester to test the Hardness easily at the work pieces on the scene and the portable ultrasonic thickness measurement instrument to test the thickness easily and accurate.
There are also abrasion resistance testing machine and a series of metallograhy experiment instruments, so the metallurgical microstructure and wear resistance can be tested.
The below picture shows our laboratory. There are many equipments to suppert our Quality Inspection Technology Department, for sample: a series of metallographic analysis equipments, protable spectrum, protable ultrasonic thickness tester, protable ultrasonic hardness tester, destop Rockwell hardness tester, Infrared carbon sulfur analyzer, Quartz sand rubber wheel abrasion test machine and Reciprocating abrasion tester.
We are certified with the ISO9001:2008 and keep continuously improving our quality management system. We have strict procedures for raw materials, products inspection, production process, storage management and after sales service.
We are certified with the ISO1400:2004 and keep continuously improving our environmental management system. We use the electric boiler not the coal fired boiler to protect the environmental. We use the advanced dust removal and ventilation equipment to keep the air clean.
We are certified with the OHSAS18001-2007 and keep continuously improving our occupational health and safety management system. Our every technical staff wears filter mask, protective clothing and gloves and welding goggles.
Jiangsu Wodon Wear Resistant Material Co., Ltd is located in Jiangsu city, China's northern international shipping center. We are specialized in researching, developing and producing wear resistant products with many years experience in this field. We have more than 200 employees, with an annual output of 90000 squaremeters of wear plates and 9000 tons of welding consumables.
Our company covers the area about 43000 square meters. And this year we are established one more branch factory in Jiangsu to improve our production capacity.The new branch factory will be finish and full function operate in June 2017 according the company's policy.
There are 3 Workshops (36000 square meter) only in Jiangsu now, after the new branch factory finished, we will have one more big Workshop in Jiangsu, so that have more place to process wear resistant work pieces like wear resistant liner, pipe and fittings and wear resistant steel plates.
With solid technical knowledge and R&D capacity, we have many experienced surface engineering professionals and often invite experts as advisers to provide solutions related to industrial abrasion. Our products have been widely applied in different in dustries like: power, cement, iron and steel, mining, port, coal, petroleum, chemical industry, railway, valves, sugar and shipbuilding industry. In addition, our company can offer professional solutions for the abrasion in different working conditions in order to reduce costs, increase lifetime of the workpiece and extand equipment overhaul period, therefore building a very good reputation among our customers.
We use CNC automatic plasma cutting machine to cut our wear plats with high effiention and high processing precision and the multi functionial bending machine is very useful to process complex wear parts.
We have our own Quality Inspection Technology Department and the team are made of many experience exports with material science bachelor-degree and the leaders with material science master-degree. In the pictures you can also see our equipment in our laboratory. Our inspection team make regular testing on raw material, production process and our products according our company's strict policy.
In our Labortory there are many equipments to test our products. Portable Spectrum can test easily the chemical composition of wear plate surface . We also bought a new Spectro MAXx (a desktop spark direct reading spectrometer) to read the chemical composition directly from the powder.
We have a series of metallography experiment instruments, so the metallurgical microstructure can be analysed. The chromium carbide volume fraction on the microstructure is above 50%.
We use Rockwell hardness tester to test small sample from our wear plate. The test result are very accurate. We also have portable ultronic hardness and thichness testers to test easily the hardness and thickness of wear parts on the scene.
Packaging: 15 kg/spool, inside vacuum packing outside carton packing, Steel Pallet, Plastic Film, Customized
Packing Size: 1.15 m*0.58 m*0.88 m, 1.15 m*1.15 m*0.88 m, customized
Delivery Detail: Generally 7 days
Our company has a professional after-sales service team, with many years of experience not ony on hardfacing products and applications, but also on the opertion of application equipemt. We are able to quickly solve customer's problems. If there are any quality problems, the responsible person will provide reasonable solutions within 12 hours after being notified.
Exihibition team in china ming 2015
Q: Are you trading company or manufacturer ?
A: We are manufacturer with more than 3 factorys, our own sales department and our own inspection technology department.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge.
Q: What is your terms of payment ?
A:30% T/T in advance ,balance against copy of BL.
also, FOB, CIF, CFR all are available for your product.
If you have another question, pls feel free to contact us as below:
Send Inquiry to This Supplier
You May Also Like
-
Wodon Customizable Steel Flux Cored Welding Wire Manufacturer's Valve Surfacing Gas Shielding OEM SupportUS$ 4.02 - 4.02MOQ: 1 Kilogram
-
Chromium Carbide Hardfacing Flux Core WireUS$ 3.56 - 3.56MOQ: 1 Kilogram
-
250kg Drum Packing Hard Facing Flux Cored Wire Wear Plate Welding WireUS$ 4 - 4MOQ: 1 Kilogram
-
WD788 High Wear-Resistant Hardfacing CCO Flux Cored Soldering Wire Metal & Metal ProductsUS$ 5 - 5MOQ: 1 Kilogram
-
HRC58-63 1.2mm 1.6mm Flux Cored Welding Wire Mig Welding Wire for Metal Products for SaleUS$ 4 - 4MOQ: 1 Kilogram
-
Chinese Supplier Wodon Manufactured Tungsten Carbide Flux Cored Hardfacing Welding WireUS$ 7.27 - 7.27MOQ: 1 Kilogram
-
Chromium Carbide Flux Core Wire for Surface Welding Wear PlateUS$ 2.23 - 2.23MOQ: 1 Kilogram
-
High Temperature Resistant Flux Cored Hardfacing Wire for Welding Metal & Metal ProductsUS$ 9.9 - 9.9MOQ: 1 Kilogram
-
Customizable OEM/ODM Abrasive Soldering Flux Flux Cored Welding Wire for Aluminum & Welding AlloysUS$ 9.99 - 9.99MOQ: 1 Kilogram
-
MIG Flux Core Open Arc Tungsten Carbide Welding Wire Customizable Diameter ER70S-6 Model Tin Copper Metal Soldering ODM OEMUS$ 9.9 - 9.9MOQ: 1 Kilogram
