Contact Platform Support
Help CenterWear Plate for Cement Industry | HRC 58-65 Abrasion Resistance
Related Products
-
Chute Plates: High-Performance Wear-Resistant Solutions for Industrial ChutesUS$ 100 - 160MOQ: 1 Square Foot -
High-Quality Wear-Resistant Chute Plates for Mining and Bulk Material Handling IndustriesUS$ 100 - 160MOQ: 1 Square Foot
-
Chutes and Chute Liners With 400°C Temperature EnduranceUS$ 100 - 160MOQ: 1 Square Foot
-
Customizable Wear-Resistant Lining Plates Tailored to Excavator BucketsUS$ 100 - 300MOQ: 1 Square Foot
-
Wodon Chromium Wear Resistant Steel Plates for Iron Ore Mill Feeder Conveyor Wear LinersUS$ 100 - 300MOQ: 1 Square Foot
Wear Plate for Cement Industry | HRC 58-65 Abrasion Resistance
Chromium carbide composite cladding fusion bonded to a mild steel backing material.
The deposit has been realized by means of oscillated welding and a wear resistant coating applied by submerged arc welding.
Fine cracks perpendicular to the welding bead is normal due to natural stress relieving in a very hard matrix.
Very high volume of chromium carbides evenly distributed throughout the uniform thickness of the deposit.
Plate hardness ranges from HRC58-65.
Wodonplate Suitable for applications involving high abrasion and low to medium impact.
Typical applications are as follows:
Bin and hopper liners
Slurry pipes and bends
Chute and feeders liners
Belt conveyors
Dump truck bodies liner
Mining and earth moving equipment
Mill shell liners
etc...
| Thickness(backing plate + weld overlay) | L x W (mm) |
| 4+4, 5+5 | 1,400 x 3,000 |
| 6+6, 8+5, 8+6, 8+8 | 1,400 x 3,500 |
| 10+8, 10+10, 10+20, 12+12, 12+20, 14+26, 12+32, 20+30.. | 1,400 x 3,500 2,100 x 3,500 |
| Carbon | Silicon | Manganese | Chromium | Iron |
| 3.5-6.0% | 1.0-3.0% | 1.0-3.0% | 27-40% | Balance |
4, Fabrication
The backing mild steel plate provides Wodon brand overlay plates with structural integrity, which makes our overlay plates fabricated with zero damage to welding overlay, regardless of the shape and complexity of the structure. Wodon has the capabilities to manufacture and further process such fabrications or to supply formed, read-to-go wear liners.
Cutting: Wodon overlay plates could be cut by plasma, waterjet, laser. Plasma cutting is the recommended method for cutting our plate
Drilling: Straight holes and countersunk holes
Studs Welding: Wodon plate can be fabricated with studs welded to backing of wear plate (M12, M16, M20 and M24)
Joint Welding: Wodon wear plate can be welded and assembled into kinds of wear parts
Send Inquiry to This Supplier
You May Also Like
-
Heavy-Duty Grab Bucket Liners for Port Handling: Enduring Massive Ore Loading StressUS$ 200 - 300MOQ: 1 Square Foot
-
Crusher’s Tough Shield in Mining: Top Wear Liners for Efficient CrushingUS$ 200 - 300MOQ: 1 Square Foot
-
Mixer’s Durable Engine in Concrete: Quality Liners for Strong MixingUS$ 200 - 300MOQ: 1 Square Foot
-
Ash Removal System’s Anti-Wear Pioneer in Power: Durable Liners for Smooth Ash CleaningUS$ 100 - 300MOQ: 1 Square Foot
-
Blast Furnace’s Heat-Resistant Armor in Metallurgy: Tough Liners for Steelmaking LifelineUS$ 100 - 300MOQ: 1 Square Foot
-
Conveyor Transfer Point’s Smooth Guard in Port: Quality Liners for Unblocked Material FlowUS$ 200 - 300MOQ: 1 Square Foot
-
Port Conveyor Transfer Wear Liner: Material Flow SmoothieUS$ 100 - 300MOQ: 1 Square Foot
-
Port Grab Bucket Wear Liner: Loading Tough ProtectorUS$ 100 - 300MOQ: 1 Square Foot
-
Metallurgy Rolling Mill Wear Liner: Precision Rolling AssistantUS$ 100 - 300MOQ: 1 Square Foot
-
Metallurgy Blast Furnace Wear Liner: Steelmaking Fortress ShieldUS$ 100 - 300MOQ: 1 Square Foot
