Shantui Jaeoo Inductive Proximity Sensor XS2D18PA140C

Given the limited availability of detailed specifications and characteristics specifically for the "XS2D18PA140C" inductive proximity sensor from "Shantui Jaeoo," which is not a commonly known brand combination among sensor manufacturers, I will provide an overview based on the general characteristics of inductive proximity sensors and potential information sources.

Inductive proximity sensors operate on the principle of electromagnetic induction, detecting the presence of metal objects by measuring changes in the electromagnetic field induced when the object enters the sensor's sensing range. These sensors are widely used in industrial automation, robotics, security systems, and various other applications where non-contact detection of metal objects is required.

1. Working Principle:

• The XS2D18PA140C, if it is an inductive proximity sensor, would utilize the principle of electromagnetic induction, triggering an output signal when a metal object enters its sensing range.

2. Output Type:

• Typically, such sensors offer NPN or PNP transistor outputs, allowing direct interfacing with PLCs (Programmable Logic Controllers) or other digital circuits.

3. Sensing Distance:

• The sensing distance is a crucial parameter, and for the XS2D18PA140C, if it's a general-purpose industrial sensor, the sensing distance could range from a few millimeters to several centimeters.

4. Protection Rating:

• Industrial sensors often have high protection ratings, such as IP67 or higher, to shield them from dust, water, and other contaminants.

5. Installation and Wiring:

• The sensor may support various mounting options, such as direct mounting, flange mounting, or rail mounting. Wiring instructions and diagrams are usually provided for easy installation and commissioning.

6. Application Range:

• Inductive proximity sensors are suitable for various scenarios requiring the detection of metal objects' presence or position, such as material detection on automated production lines or end-effector position detection in robotic arms.