Tractor Installation Track Chassis Anti Sinking and Anti-skid

Yishou Heavy Industry will remove all transmission belts, clean them thoroughly, apply talcum powder, hang labels indicating specifications and transmission parts, and store them on the walls inside the warehouse; Remove all roller chains, clean them with diesel or kerosene, drain them, soak them in waste engine oil for about 30 minutes (or soak them in waste engine oil for 48 hours), remove them, drain the engine oil, dip them in melted butter, wrap them in kraft paper or oil resistant film, and store them in a dry and ventilated place

When the harvester is idle, dust, straw, seed bran and other debris should be cleaned as soon as possible, and then the whole machine should be rinsed with pressure water (belts, appliances, etc. must be removed and placed separately before cleaning), and dried. For metal parts (such as cutting parts), a layer of waste engine oil can be applied to the surface and newspaper can be pasted for protection. For paint peeling parts, apply the same color of paint to remove all transmission belts, clean them, apply talcum powder, hang labels indicating specifications and transmission parts, and store them on the walls of the warehouse; Remove all roller chains, clean them with diesel or kerosene, drain them, soak them in waste engine oil for about 30 minutes (or soak them in waste engine oil for 48 hours), remove them, drain the engine oil, dip them in melted butter, wrap them in kraft paper or oil resistant film, and store them in a dry and ventilated place

When the harvester is idle, dust, straw, seed bran and other debris should be cleaned as soon as possible, and then the whole machine should be rinsed with pressure water (belts, appliances, etc. must be removed and placed separately before cleaning), and dried. For metal parts (such as cutting parts), a layer of waste engine oil can be applied to the surface and newspaper can be pasted for protection. For paint peeling parts, apply the same color of paint to remove all transmission belts, clean them, apply talcum powder, hang labels indicating specifications and transmission parts, and store them on the walls of the warehouse; Remove all roller chains, clean them with diesel or kerosene, drain them, soak them in waste engine oil for about 30 minutes (or soak them in waste engine oil for 48 hours), remove them, drain the engine oil, dip them in melted butter, wrap them in kraft paper or oil resistant film, and store them in a dry and ventilated place

When the harvester is idle, dust, straw, seed bran and other debris should be cleaned as soon as possible, and then the whole machine should be rinsed with pressure water (belts, appliances, etc. must be removed and placed separately before cleaning), and dried. For metal parts (such as cutting parts), a layer of waste engine oil can be applied to the surface and a newspaper can be pasted for protection. The stripped parts should be repainted with the same color of paint