Contact Platform Support
Help CenterCorn Harvester Modified With Track Chassis, Mud and Wetland Anti Slip and Anti Sinking Vehicle
Related Products
-
The Modified Track Chassis of a Corn Harvester is Muddy and Stable Without SlippingUS$ 2800 - 28000MOQ: 1 Pair -
Tractor Modified With Triangular Track Wheels for Stable Anti Sinking Vehicle in Swampy and Muddy AreasUS$ 2800 - 28000MOQ: 1 Pair
-
Retrofitting Agricultural Tractors With Anti Sinking Semi Chain Tracks to Prevent Slipping on Muddy GroundUS$ 2800 - 28000MOQ: 1 Pair
-
Wheat Harvester Retrofitted With Triangular Track Wheel Mud Anti Sinking VehicleUS$ 2800 - 28000MOQ: 1 Pair
-
Truck Modification With Triangular Track Wheels for Anti Slip and Anti SinkingUS$ 2800 - 28000MOQ: 1 Pair
Turn on the engine water tank drain switch, drain the water, inject an appropriate amount of clean engine oil into the cylinder, and rotate the flywheel several times. Is there any looseness or damage to the parts. Loose parts should be tightened, damaged parts should be replaced, repaired, and maintained after use
Clean up any accumulated material on the surface. Weeds, straw, dust, and oil on the cutting platform, bridge, granary, and external parts of the engine should be cleaned thoroughly. Remove the upper, lower, and tail screens from the sieve box, clean the bottom shell of the sieve chamber and the weeds and dust inside the sieve box, rinse them with tap water, dry them, and then drive them into the hangar.
Remove all triangular tape, wipe it clean, tie a label, hang it on the wall inside the hangar, remove the chain, clean it in diesel, apply engine oil or butter, and store it in a ventilated and dry place.
Turn on the engine water tank drain switch, drain the water, inject an appropriate amount of clean engine oil into the cylinder, and rotate the flywheel several times. Is there any looseness or damage to the parts. Loose parts should be tightened, damaged parts should be replaced, repaired, and maintained after use
Clean up any accumulated material on the surface. Weeds, straw, dust, and oil on the cutting platform, bridge, granary, and external parts of the engine should be cleaned thoroughly. Remove the upper, lower, and tail screens from the sieve box, clean the bottom shell of the sieve chamber and the weeds and dust inside the sieve box, rinse them with tap water, dry them, and then drive them into the hangar.
Remove all triangular tape, wipe it clean, tie a label, hang it on the wall inside the hangar, remove the chain, clean it in diesel, apply engine oil or butter, and store it in a ventilated and dry place.
Send Inquiry to This Supplier
You May Also Like
-
Tractor Modification With Triangular Track Wheels for Smooth Anti Slip on Muddy GroundUS$ 2800 - 28000MOQ: 1 Pair
-
Triangle Track Walking Mechanism and Mountain Half Track Tractor, Related to the Field of Agricultural Machinery. The Triangle Track Walking Mechanism Includes a Driving Wheel, a Bracket, a Track, a Supporting Device, a Guiding Device, and a Tensioning deUS$ 2800 - 28000MOQ: 1 Pair
-
Modification of Anti Sinking Semi Chain Rails for Corn HarvestersUS$ 2800 - 28000MOQ: 1 Pair
-
Harvester Modification Anti Sinking Semi Chain Rail Anti SlipUS$ 2800 - 28000MOQ: 1 Pair
-
Renovation of Rubber Track Chassis for Large Harvester Anti SlipUS$ 2800 - 28000MOQ: 1 Pair
-
Retrofitting Anti Sinking Semi Chain Rails for Large TractorsUS$ 2800 - 28000MOQ: 1 Pair
-
Renovation of Large Harvester Track Chassis for Anti Slip and Anti SinkingUS$ 2800 - 28000MOQ: 1 Pair
-
2004 Tractor Modification With Triangular Track Wheels for Anti-skid on Muddy GroundUS$ 2800 - 28000MOQ: 1 Pair
-
Retrofitting Large Tractors With Triangular Track Wheels for Anti Slip and Anti SinkingUS$ 2800 - 28000MOQ: 1 Pair
-
Installation of Large Rubber Track Half Chain Track HarvesterUS$ 2800 - 28000MOQ: 1 Pair
