Rubber Accelerator MBTS (DM)
| Item | Powder | Oiled powder | Granule |
| Appearance | Gray-white or light yellow powder(granule) | ||
| Initial M.P. ℃ ≥ | 166 | 166 | 166 |
| Loss on drying % ≤ | 0.4 | 0.4 | 0.3 |
| Ash % ≤ | 0.3 | 0.3 | 0.3 |
| Residue on 150μm sieve % ≤ | 0.05 | 0.05 | \ |
| Residue on 63μm sieve % ≤ | 0.5 | 0.5 | \ |
| Additive % | \ | 1.0-2.0 | \ |
| Granule Diameter mm | \ | \ | 1.5 |
Properties: A little bitter taste. Specific gravity: 1.50--1.59. Soluble in chloroform, toluene, benzene, carbon tetrachloride. Insoluble in water and ethyl alcohol.
Application: Given flat, moderately fast cures in NR and SR. Also used in a wide range of general purpose rubber. Non-staining/non-discolouring in "white" socks; use as a plasticiser and/or retarder in polychloroprene rubber. Secondary acceleration is usually required for synthetic polymers. Better scorch safety than MBT.
Send Inquiry to This Supplier
You May Also Like
-
Rubber Accelerator ETU(NA-22)NegotiableMOQ: 1 Bag
-
Rubber Accelerator DCBS(DZ)NegotiableMOQ: 1 Bag
-
Rubber Accelerator DPG (D)NegotiableMOQ: 1 Bag
-
Rubber Accelerator ZDBC (BZ)NegotiableMOQ: 1 Bag
-
Rubber Accelerator ZDBC (BZ)NegotiableMOQ: 1 Bag
-
Rubber Accelerator ZDMC(PZ)NegotiableMOQ: 1 Bag
-
Rubber Accelerator NOBS (MBS)NegotiableMOQ: 1 Bag
-
Rubber Accelerator ZMBT (MZ)NegotiableMOQ: 1 Bag
-
Rubber Antioxidant TMQ (RD)NegotiableMOQ: 1 Bag
-
Rubber Antioxidant IPPD (4010NA)NegotiableMOQ: 1 Bag