Rubber Accelerator TMTD(TT)
Specification:
| Item | Powder | Oiled powder | Granule |
| Appearance | White or light gray powder(granule | ||
| Initial M.P. ℃≥ | 140 | 140 | 140 |
| Loss on drying % ≤ | 0.5 | 0.4 | 0.5 |
| Ash % ≤ | 0.4 | 0.4 | 0.4 |
| Residue on 150μm sieve % ≤ | 0.1 | 0.1 | \ |
| Residue on 63μm sieve % ≤ | 0.5 | 0.5 | \ |
| Additive % | \ | 1.0-2.0 | \ |
| Granule Diameter, mm | \ | \ | 1.0-3.0 |
Properties: White or light gray powder (granule). The density is 1.29. Soluble in benzene, acetone, chloroform, CS2 partly soluble in alcohol, diethyl ether, CCI4 insoluble in water, gasoline and alkali with lower concentration. Meeting hot water becomes to dimethyl ammonium and CS2. Be sensitive to skin and peogaster
Application: Can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanisation plateau with good heat aging and compression set resistance in sulphurless and EV cure systems Good color retention is obtained in non-black vulcanisation. A valuable secondary accelerator for EPDM. May be used as a retarder in the vulcanisation of polychloroprene rubber with ETU and also be used as bactericide and pesticide
Send Inquiry to This Supplier
You May Also Like
-
Rubber Accelerator ZDBC (BZ)NegotiableMOQ: 1 Bag
-
Rubber Accelerator ZDBC (BZ)NegotiableMOQ: 1 Bag
-
Rubber Accelerator ZDMC(PZ)NegotiableMOQ: 1 Bag
-
Rubber Accelerator NOBS (MBS)NegotiableMOQ: 1 Bag
-
Rubber Accelerator ZMBT (MZ)NegotiableMOQ: 1 Bag
-
Rubber Antioxidant TMQ (RD)NegotiableMOQ: 1 Bag
-
Rubber Antioxidant IPPD (4010NA)NegotiableMOQ: 1 Bag
-
Rubber Antioxidant 6PPD (4020)NegotiableMOQ: 1 Bag
-
Rubber Antioxidant A (PAN)NegotiableMOQ: 1 Bag
-
Rubber Antioxidant D (PBN)NegotiableMOQ: 1 Bag