Salt Mist Test Chamber(Salt /Temperature /Humidity)salt Spray Chamber

Application 

The composite cyclic corrosion test chamber is capable of conducting traditional salt spray, dry-wet alternation mixed salt spray tests, as well as most automotive cyclic corrosion tests. It is specifically designed and assembled to meet the requirements of standards for controlling salt spray,relative humidity, air dryness,condensation humidity, automatic spraying, saltwater immersion, rotating spraying, and low temperature. Salt spray cabinet is used for testing paint-coated parts, metal components,electronic components,electrophoretic coated parts, and more.

Feature 

1.Structure of Salt Mist Test Chamber: with enclosure is a fully anti-corrosion structure, made of multi-layer fiberglass reinforced polyester resin, and constructed with corrosion-resistant materials.

2.Unique design: Large spraying area and high flow rate, resulting in shorter spraying time compared to fogging the solution under salt spray function.If you need more models about our test equipment, please reference our chamber-testing（.）com 

3.Custom nozzle: Specific nozzles evenly spray the solution onto the test sample, and the solution flow rate can be adjusted.

4.The nozzle is installed on an independent module, making it easy to remove when fogging function is enabled.

5.Programmable touch screen controller allows for operation in both Chinese and English, and enables data collection.

6.Standard test specimen racks are provided, capable of accommodating flat samples. For oversized and heavy three-dimensional samples (such as automobile hubs and engine components), grid kits with the same height as the support can be used. The enclosure is structurally robust, allowing for even distribution of the load.

7.The spray on/off time can be programmed directly to better control the corrosion rate.

Meet standard:

DO160 E/F/G  Salt spray test requirements

GB/T 20854-2007/ISO14993-2001

    Accelerated testing of corrosion cycles of metals and alloys exposed to salt spray, "dry" and "wet" conditions

GB/T24195-2009/ISO 16151:2005 Cyclic accelerated corrosion tests under acid salt spray, dry and wet conditions

GJB 150.11A-2009  Military equipment laboratory environmental test method salt spray test

GB/T 2424.17-2008/IEC60068-2-11:1981  Salt spray test method

GB/T 2423.18-2012/IEC 60068-2-52: 1996  Alternating salt spray test method for sodium chloride

GB/T 2423.3-2006/IEC6008-2-78-2001 Test cab: constant wet heat test method

GB/T 10125-2012/ISO9227-2006 Corrosion test in artificial atmosphere salt spray test

GB/T 31467.3-2015

    Lithium-ion power battery packs and systems for electric vehicles

 - Part 3: Safety requirements and test methods: Salt spray test

ASTM B117,ASTM B368

GB/T 10587-2006  Salt spray test chamber technical conditions

GB/T 10586-2006  Wet heat test chamber technical conditions

GB/T 5170.8-2008_Test method for environmental test equipment for electrical and electronic products-salt spray test equipment