Contact Platform Support
Help CenterWalk In Salt Spray Chamber (Temperature Humidity Combine Salt Spray)
Related Products
-
Programmable Climate Chamber Environmental Temperature And Humidity Test MachineNegotiableMOQ: 1 Bag -
Standards Implemented and Meet for Walk in Climatic ChamberNegotiableMOQ: 1 Bag
-
Temperature And Humidity Test Chamber 480L Programmable ConstantNegotiableMOQ: 1 Bag
-
Cyclic Corrosion Salt Spray Test Chamber PH6.5-7.2 For Metal TestingNegotiableMOQ: 1 Bag
-
Siemens Controller Walk In Humidity Chamber 380vac±10% 50/60hzNegotiableMOQ: 1 Bag
Application
JOEO Walk In Salt Spray Chamber is different from basic salt spray test chamber.Walk In Salt Spray Chamber exposes sample to a series of different environments in repetitive cycles that incorporate temperature , humidity, salt spray and dry.
Accelerated corrosion test methods included ASTM B117, ASTM BG85, ISO9227, IEC60068-2-52, iec61701-2, ISO7253 and many others.
Test Object: battery pack andsystem.
Refer GB/T4 part 5.5.2 test method, test according to GT/T2423.17 test conditions.
The salt solution was made up with sodium chloride (chemically pure and analytically pure) and distilled or deionized water，Its concentration is (5 + 1)% (mass fraction).
(35 ± 2) ℃, the measured pH value is between 6.5-7.2.
Placed the test objects in the salt spray chamber for cycling test. Each cycling duration for 24h. Spray salt solution to the test object for 8 hours under the temperature of (35± 2) ℃ , remain for 16 hours. Between the forth and the fifth hour in one cycles should be according to test requirement in GB/T 28046.1-2011, test mode with 3.2.
Total 6 cycles testing.
Salt Spray Chamber is not necessary for the test objects being installed in passenger, luggage or cargo compartments.If you need more models about our test equipment, please reference our chamber-testing（.）com
FEATURE AND STRUCTURE
Temperature range expandable to -40 °C and to +80 °C
Shock and scratch-resistant interior surfaces thanks to glass-fiber reinforced plastic (GRP)
Saddle roof with an inclination of at least 30°
Corrosion-resistant indirect temperature controls
Psychrometric measuring system for temperature and humidity control
Heating elements to control test chamber temperature, with overtemperature protection
Ventilation device to flush the test chamber with fresh air
Send Inquiry to This Supplier
You May Also Like
-
Laboratory Humidity Temperature Chamber Touch Screen EquipmentNegotiableMOQ: 1 Bag
-
Walk In Temperature And Humidity Control Chamber 8000L Inner VolumeNegotiableMOQ: 1 Bag
-
Stainless Steel Thermal Vacuum Chamber Used for Testing Solar CellsNegotiableMOQ: 1 Bag
-
Laboratory Safety Assurance Walk In Climate Chamber With Slope Safety HammerNegotiableMOQ: 1 Bag
-
Real Programmable Simulation Environment Climate Test Chamber For LaboratoryNegotiableMOQ: 1 Bag
-
UL Temperature High Altitude Simulation Chamber Waterproof MultipurposeNegotiableMOQ: 1 Bag
-
Thermal Shock Test Chamber(2 Zone)--Thermal Chamber ManufacturersNegotiableMOQ: 1 Bag
-
Industrial Vacuum Oven-Vacuum Drying OvenNegotiableMOQ: 1 Bag
-
Operating Temperature 500℃ High Temperature Oven Intelligent Touch ScreenNegotiableMOQ: 1 Bag
-
Industrial Vacuum Oven-Vacuum Drying OvenNegotiableMOQ: 1 Bag
