PHARPS32000000 High Voltage Variable Frequency Control Board
This device can be directly placed behind the Profibus DP master station to convert a single cable bus into a redundant bus; It can also be placed at the slave station to convert redundant buses into non redundant cables, while also having performance such as photoelectric isolation and reducing interference. The product features industrial grade design, IP30 protection level, corrugated aluminum reinforced casing, 35mm guide rail installation, DC (12-36V) wide power input, relay alarm output, dual power redundancy protection, and other advantages.
installation method
Bus data interface
*9-pin Sub_ D-jack connector, pin definition in accordance with Profibus DP protocol specifications
*Supports Profibus DP bus standard
*Signal delay (electrical port): ≤ 4Bit
*Communication speed: 9.6Kbps, 19.2 Kbps, 45.45Kbps, 93.75Kbps, 187.5Kbps, 500Kbps, 1.5Mbps, 3Mbps, 6Mbps, 12Mbps
*Equipped with 4000V lightning protection, 1.5A overcurrent protection, and 600W surge protection functions
*Terminal resistance: This device does not come with a terminal resistance, please connect it externally as needed
*Terminal resistance: This device does not come with a terminal resistance, please connect it externally as needed
Power supply and protection
*Power supply: Dual power redundant input, DC (12-36V), typical DC24V, power consumption less than 4W, with reverse protection function, industrial terminal interface
*Relay alarm output: Bus data interface fault alarm output, contact capacity: DC48V/1 A, industrial terminal interface
mechanical properties
*External dimensions: (136x106x54) mm
*Shell: IP30 protection level, corrugated aluminum reinforced casing
*Installation method: 35mm guide rail installation
*Net weight: 800g
work environment
*Working temperature: -10 ℃~70 ℃, optional wide temperature product (-40~85 ℃)
*Storage temperature: -40 ℃~85 ℃
*Relative humidity: ≤ 90% (non condensing)
Contact information: 15359293870
WhatsApp:+86 15359293870
Contact person: KELLY
Email: geabbdcs@gmail.com 386353502@qq.com
Official website:
Performance indicators:
Data electrical interface
*1-2 5Pin terminal interfaces, in accordance with CiA organization recommendations and ODVA organization recommendations
*Supports CAN BUS/DeviceNet/CANOpen bus standards
*Communication speed: DeviceNet/CANOpen all and common CAN speed levels, up to 1M
*Equipped with 4000V lightning protection, 1.5A overcurrent protection, and 600W surge protection functions;
*Terminal resistor: This machine is equipped with an optional 120R terminal resistor, which can be added by shorting pin 1 and pin 5 of the 5Pin data electrical interface.
Fiber optic interface
*Fiber wavelength: multimode 850nm, 1310 nm; Single mode 1310 nm, 1550 nm.
*Transmission fiber: multimode 50/125 um, 62.5/125 um, 100/140 um; Single mode 8.3/125um, 9/125um, 10/125um.
*Transmission distance: Multi mode 2Km, single mode 20Km, optional for further distances.
*Fiber optic interface types: SC, FC, ST optional, standard SC optical interface.
Power supply and protection
*Power supply: Dual power redundant input, DC
Send Inquiry to This Supplier
You May Also Like
-
CI871K01 Communication Interface Automation EquipmentNegotiableMOQ: 1 Bag
-
PPD113B01-10-150000 DCS Module of SIS SystemNegotiableMOQ: 1 Bag
-
PM866K01 Controller ModuleNegotiableMOQ: 1 Bag
-
UNITROL 1020 Original Excitation SystemNegotiableMOQ: 1 Bag
-
EL3020 Continuous Gas AnalyzerNegotiableMOQ: 1 Bag
-
5SHX2645L0004 Excitation System ControllerNegotiableMOQ: 1 Bag
-
408368B IAM MODULE Industrial Control System Automation Spare PartsNegotiableMOQ: 1 Bag
-
PM150V08 Programmable Central Control UnitNegotiableMOQ: 1 Bag
-
5SHY3545L0009 Digital OutputNegotiableMOQ: 1 Bag
-
PM511V16 System Spare Parts Warehouse Supply ModelNegotiableMOQ: 1 Bag
