Contact Platform Support
Help CenterUG-10D Governor Module
Related Products
Shenzhen Xunji independently developed the control net bus fiber optic module: IP30 protection level, corrugated aluminum reinforced casing, 35mm guide rail installation, DC 18-36V (9-18V optional) wide power supply, with relay alarm output, dual power redundancy, and isolation protection functions. Ci-CF110 to fiber optic supports one fiber optic interface and one bus data interface, while Ci-CF120 to fiber optic supports two cascaded up and down fiber optic interfaces and one bus data interface.
Bus data interface
*BNC-F interface form
*Supports ControlNet fieldbus protocol, communication rate: 5Mbps
*Isolation voltage: Instantaneous isolation voltage 5000V, continuous isolation voltage 1000V
*Terminal resistance: There is no terminal resistance inside this device. Please decide whether to connect it externally as needed
Fiber optic interface
*Fiber wavelength: multimode 850nm, 1310nm; Single mode 1310nm, 1550nm
*Transmission fiber: multimode 50/125um, 62.5/125um, 100/140um, single mode 8.3/125um, 9/125um, 10/125um
*Transmission distance: multimode 2km, single mode 20km, longer distance optional
*Fiber optic interface type: ST, SC, FC optional, standard ST optical interface
Power supply and protection
*Power supply: Dual power redundant input, DC 18-36V (9-18V optional) typical DC24V, power consumption less than 1.5W, with DC1000V voltage isolation and reverse protection function, industrial terminal interface
*Relay alarm output: Fiber optic link fault alarm output, contact capacity: DC48V/1 A, industrial terminal interface
Contact information: 15359293870
WhatsApp:+86 15359293870
Contact person: KELLY
Email: geabbdcs@gmail.com 386353502@qq.com
Official website:
The scale is one tenth of a degree.
This module has 16 24 VDC digital outputs, PNP type, with a maximum current of 0.5 A per channel, typically used for heating and/or cooling.
Any available output can also be used to control the machine cycle.
All outputs have current cycling circuits for sensing loads, and have short circuit, overload, and overheat protection.
There is also a 24 VDC NPN digital input to measure the period of the applied signal.
The maximum input frequency is 1 kHz.
This module is installed on R-BUS (x) and receives power from it.
Product features:
● 8 optical isolation inputs for thermocouples
J, K type thermocouples
16 optical isolated digital outputs
1 optical isolation frequency input 1,5kHz
● Software configuration for TC or TR input
● Diagnostic LEDs for power, output, and alarms
● Provide detachable connectors
● Compliant with UL508
e rail fastening, in accordance with EN 50022-35 standard
Gross weight (g): 206,8
TBUS DIN rail for expansion modules and bus couplers
Rated control circuit power voltage US: 18 V DC 30 V DC (including all tolerances, including residual voltage)
Rated control circuit power voltage US: 24 V DC (A1/A2)
Rated control power supply current IS: typical value 110 mA
Limit continuous current: maximum 6 A (for loop current paths A1/A1 and A2/A2)
Delay time: typical value of 20 ms (depending on load, in case of voltage drop of US)
Protection circuit: Yes, within the operating voltage limit range
Status display: 3x green LED, 1x red LED
Input Description: Number, HTL type
Input quantity: 10 (dual channel, up to SIL 3)
20 (single channel, up to SIL 2)
Input voltage range, "0" signal: 0 V DC 5 V DC (for safe shutdown)
Input voltage range, "1" signal: 11 V DC 30 V DC
Cable length: maximum 2000 m
Status display: 20 x green LED (1 LED per input)
Power consumption: typical value 4 mA
Number of outputs: 4 (safe semiconductor output, up to Cat. 4 (according to EN ISO 13849-1)
2 (negative switching output)
Precautions for protecting the circuit: Yes, within the operating voltage limit range
Short circuit protection: Yes
Output voltage:
Leakage current: maximum 2 mA
Maximum capacitive load: maximum 1 µ F (electronic components)
Limit continuous current: 2 A (per channel, see derating)
Send Inquiry to This Supplier
You May Also Like
-
DSMB-01C Inverter Drive Power BoardNegotiableMOQ: 1 Bag -
SE3007 Controller SystemNegotiableMOQ: 1 Bag
-
ZMI 4104 Disconnect Connector BoardNegotiableMOQ: 1 Bag
-
MPL-B540K-MJ74AA Laser System Control BoardNegotiableMOQ: 1 Bag
-
MC-4/10/50/400 Servo AmplifierNegotiableMOQ: 1 Bag
-
PPC.R22.1N-T-NN-P2-NN-FW ControllerNegotiableMOQ: 1 Bag
-
ZMI 7714 8070-0278-02 Laser Interference HeadNegotiableMOQ: 1 Bag
-
8440-1955NegotiableMOQ: 1 Bag
-
9907-1200 Electrohydraulic ConverterNegotiableMOQ: 1 Bag
-
505 8200-1300rDigital Governor SystemNegotiableMOQ: 1 Bag
