Contact Platform Support
Help CenterASTM D93 Flash Point by Pensky-Martens Closed Cup Tester
Product Spotlights
Related Products
-
ASTM D93 Fully Automatic Flash Point by Pensky-Martens Closed Cup TesterUS$ 6900 - 7000MOQ: 1 Piece -
ASTM D2420 Hydrogen Sulfide in Liquefied Petroleum Gases TesterUS$ 4300 - 4400MOQ: 1 Piece
-
ASTM D611 Petroleum Product Distillation Tester ASTM D86US$ 6600 - 6700MOQ: 1 Piece
-
ASTM D5182 FZG Gear Oil Wear Testing MachineUS$ 28000 - 30000MOQ: 1 Set
-
ASTM D5452 Particulate Contaminant in Aviation Fuel TesterUS$ 1300 - 1400MOQ: 1 Set
Flash Point by Pensky-Martens Closed Cup Tester ASTM D93
Product Model: JF261A
Product Introduction
This instrument is suitable for determining the closed flash point of petroleum products. The test method: the sample is heated at a very slow constant rate with continuous stirring. The flash point is the lowest temperature at which the test flame causes a vapor flashover on the sample when a small flame is introduced into the cup at specified temperature intervals while stirring is interrupted.
Technical Parameter
1. Applicable standards: ASTM D93; ISO2719; DIN51751
2. Temperature control method: solid state voltage regulator
3. Heating method: electric furnace wire heating
4. Overall power: 600W
5. Working unit: single cup
6. Working power supply: AC220V,240V/50,60Hz
7. Machine power: 800W
Main Feature
1. The temperature conduction adopts a metal bath.
2. One-piece structure, easy to operate;
3. The oil cup is made of brass, the inner diameter is Φ50.8mm, the outer diameter is Φ54.0mm, and the cup height is 58.3mm; it meets the requirements of ASTM standards;
4. The heating power can be adjusted arbitrarily;
5. There is a stirrer on the electronic heating bath;
6. Stainless steel heater;
7. The voltmeter shows the heating status;
8. The shell is made of cold-rolled steel plate, and the surface is treated with electrostatic spray, which has good rust resistance and is easy to clean;
9. The sample scale line is drawn in the oil cup to ensure the accuracy of the experiment;
10. It is very convenient to access the control box.
Send Inquiry to This Supplier
You May Also Like
-
ASTM D3427 Air Release Properties of Petroleum Products TesterUS$ 4200 - 21230MOQ: 1 Set
-
ASTM D1264 ADDITION Lubricating Grease Water Washout Characteristics TesterUS$ 3400 - 4000MOQ: 1 Set
-
ASTM D721 ADDITION Petroleum Waxes Oil Content TesterUS$ 5100 - 5800MOQ: 1 Set
-
ASTM D4929 Microcoulomb Sulfur and Chlorine AnalyzerUS$ 10000 - 11000MOQ: 1 Set
-
Gas Chromatography AnalyzerUS$ 36510 - 37510MOQ: 1 Set
-
Hydrocarbon of Liquid Petroleum Products Tester (Fluorescent Indicator Adsorption Method)US$ 6500 - 7500MOQ: 1 Set
-
Automatic Atomic Absorption Spectrometer Elements AnalyserUS$ 22200 - 23700MOQ: 1 Set
-
ASTM D97 Automatic Pour Point of Petroleum Products TesterUS$ 22200 - 26500MOQ: 1 Set
-
ISO 13357 Filterability of Lubricating Oil TesterUS$ 4500 - 5500MOQ: 1 Set
-
FTMS 791B Lubricant Vehicle Gear Oil Groove Point TesterUS$ 4800 - 5800MOQ: 1 Set
