Aluminum Alloy Corrosion of Engine Coolant Tester

Product model: JF0620

Product Introduction

The instrument consists of a support and one or two thermally conductive corrosion cells with a working pressure of 40 psi and an operating temperature of 160 °C; an electronic timer controls the test time and an electronic thermostat controls the temperature;

Technical Parameter

1. Applicable Standard: SH/T0620

2. Heating mode: Electric heating plate heating

3. Temperature control mode: Digital display PID temperature controller

4. Temperature control range: Rt ~ 160 °C

5. Temperature control accuracy: ±0.1°C

6. Timing mode: Digital display timer

7. Pressure display: Pressure gauge

8. Power: 200W

9. Working power: AC220V/50Hz

10. Instrument Size:380*320*920mm

11. Net Weight: 32KG

Performance characteristics

1. The shell of the instrument is ceramic coated refined steel surface, durable;

2. Corrosion pool outside the protective cover;

3. Thermal conductivity corrosion cell for heat-resistant glass manufacturing, cover and bottom are stainless steel materials;

4. Stainless steel thermal conductivity bar by solid state relay control 950 W heater;

5. Components mounted on top of the etching cell: bleeder valve, pressure reducing valve and pressure gauge are made of stainless steel;

6. Sample inlet in the upper cover, the mouth with sealing bubbles, four stainless steel column connected to the cover and the base;

7. The temperature controller of the instrument is a set of temperature control and display as a whole and with a microprocessor can be PID-adjusted intelligent regulator, the sensor for the K-type thermocouple, for the two-position instrument, all parts are two sets;

8. The instrument has over-temperature safety protection function;

      9. Electronic timer, can be preset test time, arrive at the time, the instrument will automatically stop heating, the two corrosion cell can be tested separately, without mutual interference