Sapphire ring face equipment-250W gem CNC machine tool, grinding and polishing, the whole machine uses 5 stepper motors as the action execution power source, making gem shape round, egg, pear, horse eye, long, rectangular, triangle, heart.

Cheuky Brand Gemstone Cutting Surface Facing Angle Grinding and Polishing CNC Machine Tools

(The sixth generation of new models)

No. 810501888 Model No. XX-280

This automatic machine is operated by 5 stepping motors, the function of each motor is as follows.

y1 motor function: responsible for turning the plate position (as octagonal hand or robot)

y2 motor function: responsible for downward sand angle or strength (distance from the plate, the larger the number the lower the direction)

y3 motor function: responsible for swinging to the left or right to move the head, that is, playing a good sand when the tune, (the larger the number of the past throwing disk direction)

y4 motor function: responsible for raising lower (such as octagonal hand lifting platform). (The larger the number the more upward)

y5 motor function: responsible for moving back and forth. ( The larger the number the more forward )

Input board position --- y1 parameter (the 01st board y1 value start input)

Adjust the stone---y1 parameter (overall adjustment)

Adjust the height ---- y4 parameter (height)

Adjustment to the downward swing angle ---- y2 parameter (y2 height from the plate)

Re-adjustment of height---y4 parameters (height)

Overall increase and decrease strength ---- y2 parameters (y2 strength overall increase and decrease)

Polishing strength --- y2 parameters (Note: Polishing strength from 80)

Separate each board to add, subtract strength---y2 parameter (start to find the strength of the 01st board)

Forward and reverse (stroke)

Row to do, point to do---y3//y5 mode: forward and reverse (row to do), point sand (point to do)

Row long, row short distance --- y5 parameters (y5 landing position)

Rowing fast, rowing slow speed --- speed settings (y5 speed)

Downward sand speed: speed settings (v2 low speed speed), y2 parameters (y2 low speed height)

Polishing parameter operation function

y3 parameter (y3 position: adjust 7000 around)--- test y4 parameter (y4 height)--- test

y2 parameters (y2 away from the disk height) --- re-adjustment y4 parameters (y4 overall lift) ---adjustment row long, row short distance 

  y5 parameter (y5 sliding distance)---add strength y2 parameter (y2 strength overall increase or decrease)

The number of layers can be processed for 1-10 layers, each layer has 16 board surfaces.

On the basis of the original function, increase the type and size of the subdivided

1: Control box gem type to add two models, the original round, egg-shaped, pear-shaped, horse-eye shape, long, rectangular, triangular, heart-shaped. (Both new and old models have the function of self-setting type).

2: Size subdivision, for example: in the egg-shaped type can save 15 kinds of size, such as 5X7 7X9 10X12 10X14 12X16 (the old machine is not this function)

3: According to the need in the process of processing any speed, molding efficiency is high feet, inches of uniform shape, high precision

Suitable for: corundum, spinel, ruby, turquoise, peridot, topaz/tourmaline, sapphire, tourmaline/tourmaline, garnet, agate, amber, tiger's eye, zircon, glass

Available shapes: round, oval, square, rectangle, triangle, pear, heart, teardrop, horse's eye, plum blossom, star, leaf, axe, three-dimensional beads, three-dimensional droplets, three-dimensional triangular square ring, egg ring, pear ring, bracelet, intermediate finger, flat beads, round beads and so on.

Lemon crystal stone head 4x5 shaped, 1 day 8 hours 1 person 100 workpieces.1 engineer to operate 3 machines

Accessories: diamond molding discs/polishing discs/polishing powder

Technical parameters:

Processing size: diameter 4-30mm

Processing stone size: length 30X width 20X thickness 10mm

Control system ：PLC program control programming

Maximum processing efficiency: 120-300 seconds

Processing quantity ：4x5 Staggers, 8 hours 1 person 100 workpieces

English system can be switched

Loading grinding disk size: 7 inches (180mm)

Loading polishing disk size: 7 inches (180mm)

Input voltage:AC220V

Motor power:250W

Main speed:2800r/min

Dimension:L810mm×W560mm×H1420mmSemi automatic machine series [ring face processing equipment series] faceted gemstone processing process: pre shaping and shaping: cutting → shaping → punching → blank → subsequent angle making

Embryo forming → gluing stone → ring shape → front facet grinding → front facet polishing → gluing gem → back grinding → back polishing → glue removal and cleaning

Guangzhou Panyu District, Guangdong Province, Zhuoji Gemstone Machinery Co., Ltd. was established in 2003, is a collection of research and development, production, sales as one of the suppliers of gemstone machinery, the company from the domestic and foreign introduction of a large number of professional production tools and advanced technology, after more than 10 years of time and careful design and manufacture, has now developed into a mature production, processing, sales and after-sales service system of the enterprise.

    Striving for excellence in product quality makes our products get the unanimous praise from the industry. Our products are sold to all over the country and Europe, America, Southeast Asia and other countries and regions, and at the same time, we have become an important supplier for many gemstone processing bases, which are well recognized by domestic and foreign users.

    Welcome to visit us and talk with us!

Business Scope:

Jewelry and gemstone processing equipment series

1、Gemstone cutting and cutting automatic processing equipment/cutting piece

2, Color gemstone automatic CNC processing equipment/tools.

3, Gemstone round beads round ball beads automatic CNC processing equipment / tools

4、Jade jadeite bracelet processing equipment/tools

5, Alien miscellaneous shape processing equipment / tools

6, gemstone injection glue filling optimization processing equipment / tools

7, vibration barrel polishing processing equipment / abrasives

8、Punching and drilling processing equipment/tools