Programmable Controller Uv Light Testing Equipment AC220V
UV Ageing Weathering Chamber Introduction:
Weatherometer fadeometer is another type of light aging testing machine simulating lighting, mainly UV in sunlight. It is able to simulate the damage created by nature rain and dew via exposing test samples to under-controlled interaction cycle of sunlight and moisture and rising temperature. The UV weather test chamber adopts Ultraviolet fluorescent to simulate sunlight and, at the same time simulate moisture influence through condensation or spray.
Test samples and performance evaluation:
1. Appearance assessment: the appearance of the coating is mainly assessed, and can also be visually assessed Plastic and Rubber necessary. The check project is mainly for gloss, color change, chalking, spots, blisters, cracks and dimensional stability, etc. Should try to use the instrument to do Quantitative detection, such as gloss, colorimeter.
2. Evaluation of the mechanical and other properties: tensile strength of general rubber material, elongation, hardness measurement, the measurement red plastic impact strength, elongation at break, tensile strength, flexural strength, if necessary, may require additional performance testing projects.If you need more models about our test equipment, please reference our chamber-testing(.)com
Specifications :
| Rubber Programmable Accelerated Weathering UV Aging Test Chamber Technical Parameters | ||
| Model | G-UV-280 | |
| Internal Dimension W*H*D (cm) |
115*50*40 | |
| External Dimension W*H*D (cm) |
150*150*55 | |
| Applicable Standard | GB/T16422,GB/T5170.9 | |
| Temperature Range | R.T.+10degree C~+70degree C | |
| Temperature Fluctuation | ±0.5degree C | |
| Humidity Range | ≥95%R.H. | |
| Environmental Temperature for Use |
+5degree C~+35degree C | |
| Test Light Source | UVA,UVB UV light | |
| Wave Length of Test light Source (nm) |
280~400 | |
| Center Distance between Sample and Tube (mm) |
50±2 | |
| Center Distance Between Tubes (mm) |
75±2 | |
| Material of Internal Case | Stainless steel with sanding polish | |
| Material of External Case | Stainless steel with sanding polish or painting coated | |
| Heating and Humidifier | Electric-heat type steam generator ,heating and humidification | |
| Safety System | Operation Interface | Digital smarts touch key input (Programmable) |
| Running Mode | Program/constant running type | |
| Input | Black panel thermometer.PT-100 Sensor | |
| Standard Configuration | 1 pc Stainless steel shelves | |
| Safety Configuration | Protection of electric leakage, power outage when over-load, over-temperature protection, water short storage, ground lead protection | |
| Power | AC220V 1phase 3 lines, 50HZ | |
Customer Support Services:
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Send Inquiry to This Supplier
You May Also Like
-
Certified High Quality Salt Spray Corrosion Test ChamberNegotiableMOQ: 1 Bag
-
High Precision Salt Spray Tester PID Temperature Controller 480LNegotiableMOQ: 1 Bag
-
UV Weathering Test Chamber 40W UV Lamp Testing EquipmentNegotiableMOQ: 1 Bag
-
Power Supply380v 40w Uv Light Testing Equipment Waterproof AcceleratedNegotiableMOQ: 1 Bag
-
Accelerated UV Weathering Test Chamber Stainless Steel 50HzNegotiableMOQ: 1 Bag
-
UV Weather Simulated Accelerated Aging Test Machine , Plastic Aging Test ChamNegotiableMOQ: 1 Bag
-
Touch Screen UV Accelerated Aging Chamber Air Pressure 86-106kpaNegotiableMOQ: 1 Bag
-
Copper Accelerated Salt Spray Tester For Powder Coating Testing Room 270LNegotiableMOQ: 1 Bag
-
Intelligent Temperature Control Instrument Water Spray Test Chamber AC220VNegotiableMOQ: 1 Bag
-
Programmable Rain Fog Test Chamber Corrosion Resistant And Easy To CleanNegotiableMOQ: 1 Bag