Mitsubishi Q12HCPUmodule

Mitsubishi Q12HCPUmodule

1. The supported local I/O can reach 4096 points, and the program capacity is 252K steps.

2. Fast instructions only take 34 nanoseconds.

3. In addition to using ladder diagram, statement table, ST (structured text, high-level programming language like), SFC, FB and other five programming languages for programming, structured programming is also supported, with 252 programs.

4. Built in standard RAM and ROM, and can also be plugged into a memory card.

5. There are two programming interfaces, 12M USB and 115K RS232 (excluding Q02CPU).

Q12HCPU program capacity: 124k steps I/O points: 4096

Control method: Repetitive operation of stored programs

Input/output control method: refresh method

Programming languages: Sequential Control * * * Language, Relay Symbol Language, Logic Symbol Language, SFC (MEL. SAP-3)

Constant scanning: 0.5~2000ms (can be set in units of 0.5ms)

Program capacity: 124K steps

Number of files: 124

Number of input and output soft component points: 8192 points (X/Y0~1FFF)

Consumption current: 0.64A

Permissible instantaneous power outage time: according to the power module

External dimensions: 98 (H) * 27.4 (W) * 89.3 (D)

Operating environment temperature: 0-55 ℃

Storage environment temperature: -25-75 ℃ * 3

Seismic resistance: in accordance with JIS B3501 and IEC61131-2 standards

Impact resistance: in accordance with JIS B3501 and IEC61131-2 standards

Working environment: No corrosive gases present

Ground height: ≤ 2000m (6562ft)

Installation position: inside the control board

Overvoltage level: II

Pollution and: ≤ 2

CPU unit of Mitsubishi Q25HCPU Mitsubishi Q series PLC

Operating environment temperature: 0-55 ℃

Storage environment temperature: -25-75 ℃ * 3

Seismic resistance: in accordance with JIS B3501 and IEC61131-2 standards

Impact resistance: in accordance with JIS B3501 and IEC61131-2 standards

Working environment: No corrosive gases present

Ground height: ≤ 2000m (6562ft)

Installation position: inside the control board

Overvoltage level: II

Pollution and: ≤ 2 [1]

Battery: Q6BAT Q7BAT Q7BAT-SET

SRAM memory card: Q2MEM-1MBS Q2MEM-2MBS

SRAM card battery: Q2MEM-BAT

Linear flash memory card: Q2MEM-2MBF Q2MEM-4MBF

ATA card: Q2MEM-8MBA Q2MEM-16MBA Q2MEM-32MBA

Adapter for storage card with standard PCMCIA interface: Q2MEM-ADP

RS232 programming cable: QC30R2

USB programming cable: USB-AB30 AU