Mitsubishi PLC module AJ65SBTB1-16DT3

Mitsubishi PLC module AJ65SBTB1-16DT3

Mitsubishi AJ65SBTB1-16DT3 input specifications

◆ Input points: 8 points

◆ Insulation method: optocoupler insulation

Rated input voltage: DC24V

Rated input current: approximately 5mA

◆ Voltage range: DC19.2-26.4V (fluctuation rate within 5%)

◆ Simultaneously input the number of points:***

◆ ON voltage/ON current: above 15V/3.0mA

◆ OFF voltage/OFF current: below 3V/below 0.5mA

Input resistance: approximately 4.7k Ω

Response time: below 0.2ms (at DC24V)

Input form: positive common terminal (leakage type)

AJ65SBTB1-16DT3 Output Specification

◆ Output points: 8 points

◆ Insulation method: optocoupler insulation

Rated load voltage: DC24V

◆ Operating load voltage range: DC19.2-26.4V (fluctuation rate within 5%)

◆ Load current: 0.5A/1 point 2.4A/1 common terminal

◆ Inrush current: below 1.0A l0ms

Leakage current at OFF: below 0.1mA

Voltage drop during ON: below 0.3V (TYP) 0.5A below 0.6V (MAX) 0.5A

Output form: leakage type

◆ Protection function: None

Response time:

OFF ->ON: below 0.5ms

ON ->OFF: below 1.5ms (resistive load)

◆ External power supply for the output part:

Voltage: DC19.2-26.4V (fluctuation rate within 5%)

Current: below 17.8mA (DC24V, all points ON), excluding external load current

◆ Overcurrent suppressor: Zener diode

【 Common terminal method 】 16 point 1 common terminal (terminal strip type 1-wire type)

[Number of occupied stations] 1 station allocates 32 points (using 16 points)

I/O module power supply

Voltage: DC20.4~26.4V (fluctuation rate within 5%)

Current: Below 55mA (DC24V, all points ON) without external load current

【 Noise intensity 】 By using a DC type noise voltage of 500VP-P and a noise width of 1 μ s. The noise generated by a noise simulator with a noise frequency of 25-60Hz

【 Withstand voltage 】 During 1 minute of AC500V between DC external terminal summary and grounding

【 Insulation resistance 】 DC external terminals are combined and measured with a DC500V insulation resistance meter between grounding points, with a resistance of more than 10 Ω

Protection level: IP2X

Weight 0.18kg

External Connection Method

Communication part, I/O module power supply part:

7-point 2-segment terminal strip [transmission circuit, I/O module]

1. Mitsubishi full series PLC, frequency converter, human-machine interface, servo system.

2. Xinjie PLC, frequency converter, human-machine interface and servo system.

3. Delta PLC, frequency converter, human-machine interface and servo system.

4. Wellington human-machine interface and Hytec human-machine interface.

Mitsubishi servo motor HG-JR15K1MB;

Mitsubishi servo motor HG-JR11K1MB;

Mitsubishi servo drive MR-J4-11KA

Mitsubishi servo drive MR-J4-11KB

Mitsubishi servo drive HG-KR-23J with oil seal

Mitsubishi servo store HG-KR053

Mitsubishi servo motor HG-KR73BJ with oil seal

Mitsubishi servo motor HG-SR102BJ with oil seal

Mitsubishi MR-J4-15KB servo driver

Mitsubishi PLC (programmable controller) A, R, Q, L, CC-LNK, FX3SA, FX3G, FX3G, FX3U, FX5U and other series;

Mitsubishi frequency converter A840, E840, F840, E740, D740, D720 series; Mitsubishi touch screen GT2000 series; Mitsubishi servo motor JE, J4 series.

Mitsubishi programmable controller: FX3GA, FX3GE, FX3G, FX3U, FX3UC, FX2NC, A, Q, CC-LINK remote module and other series

Mitsubishi variable frequency governor: FR-L700, FR-A700/500, F700/500, E700/500, D700/500, S500 and other series;

Man-machine interface: GOT2000, GOT16, GOT15, GOT12, GOT11, GOT10, A900GOT, F900GOT and other series;

AC servo system: MR-J4, MR-JE, MR-J3, MR-J2S, MR-E, MR-ES and other series;

Tension control system: LE-40MTA (B), LD-FX, LD-50PAU and other series:

Low-voltage electrical appliances: S-N, TH-N, etc.