German Technical Background VOK-1752 Defoamer It Can Prevent Blistering During Production and Filling of Printing Ink System Replaces BYK-1752

German technical background Volcker VOK ®- DF 1752 polymer defoamer

Without organic silicon, is used for solvent and solvent-free systems.

Product Information

Chemical composition

Foam breaking polymer solution, without organic silicon

Typical Physicochemical Data

The data given in this data page are only typical values, not technical indicators of the product.

Density (20 ° C): 0.77 g/ml

Non volatile matter (10 minutes, 150 ° C): 20%

Solvent: isoalkane

Flash point: 36 ° C

Application field

Printing ink and varnish

Product features and advantages

VOK ®- DF 1752 can prevent blistering during production and filling of printing ink system. It can also prevent the formation of foam and bubbles during processing. The additive has rapid foam breaking effect, and will not reduce the adhesion between layers when recoating. VOK ®- DF 1752 is VOK ®- DF 052 aromatic free version.

Recommended use

Solvent and solvent-free printing inks and varnishes.

Recommended dosage: 0.05-0.5% Additive dosage (supply form) is based on the general formula.

The above recommended dosage is for reference, and the appropriate dosage shall be determined through a series of tests.

Adding method and processing guidance

In order to obtain good defoaming effect, defoamer should be added to the abrasive. If it is added later, the shear force must be high enough to ensure a good distribution of defoamer, so as to prevent shrinkage.