Contact Platform Support
Help CenterJISK2046 Anti-Rust Oil-Water Replacement Experimental Thermostat
Product Spotlights
Related Products
-
GOST 7163 Lab Lubricating Grease Relative Viscosity Tester Capillary ViscometerUS$ 5600 - 5800MOQ: 1 Piece -
ASTM D5800 Noack Method Lubricating Oil Evaporation Loss Testing EquipmentUS$ 4800 - 5500MOQ: 1 Piece
-
JIS K2246 Rusting Grease Oxygen Inhalation TesterUS$ 2700 - 2800MOQ: 1 Piece
-
Automatic Engine Oil Oxidation Stability Tester (Thin Film Oxygen Absorption Method) ASTM D4742US$ 12600 - 12700MOQ: 1 Piece
-
Shear Stability of Polymer Containing Fluids Tester ASTM D6278US$ 41500 - 41600MOQ: 1 Piece
Anti-Rust Oil-Water Replacement Experimental Thermostat
Product model: JF0036
Instrument Introduction
The use of this instrument requires that the test piece soaked in distilled water should be put into the sample for 15s, then placed in a constant temperature and humid heat bath, and placed at a certain temperature for 1h to observe whether there is rust or stain on the test piece. This instrument is suitable for anti-rust oil. The instrument is suitable for petroleum products and additives.
Technical Parameter
1. Applicable standards: JISK2046, SH/T0036
2. Heating method: electric heating tube heating
3. Timing method: digital display timer
4. Refrigeration method: compressor refrigeration
5. Temperature control method: digital display PID temperature controller
6. Temperature control range: 55℃±1℃ 23±1℃
7. Working power supply: AC220,240V/50,60HZ
Performance Characteristics
1. The standard steel test piece 3×60×80mm meets the standard requirements;
2. The two baths are controlled separately;
3. Digital timer records the test time;
4. Microcomputer temperature controller, digital display, accuracy ±0.1℃ PT100 sensor;
5. Steel air bath;
6. Fully enclosed compressor refrigeration, low noise;
7. Electric heating rod heating, reduce the failure rate.
Send Inquiry to This Supplier
You May Also Like
-
Shear Stability of Polymer Containing Fluids Tester ASTM D6278US$ 41500 - 41600MOQ: 1 Piece
-
ASTM D1264 Lubricating Grease Water Washout Characteristics TesterUS$ 4100 - 4200MOQ: 1 Piece
-
Lubricating Grease Roll Stability Tester ASTM D1831US$ 4700 - 4800MOQ: 1 Piece
-
Extreme Pressure Lubricating Oil Oxidation Tester ASTM D2893US$ 5000 - 5700MOQ: 1 Piece
-
ASTM D524 Petroleum Products Ramsbottom Carbon Residue TesterUS$ 2800 - 2900MOQ: 1 Piece
-
ASTM D2272 Automatic Lubricant Oxidation Stability Tester Metal BathUS$ 8000 - 8578MOQ: 1 Piece
-
Hydraulic Oil Thermal Stability TesterUS$ 3200 - 3300MOQ: 1 Piece
-
Hydraulic Oil Filterability TesterUS$ 2600 - 2700MOQ: 1 Piece
-
ASTM D92 Semi-Automatic Opening Flash Point TesterUS$ 400 - 500MOQ: 1 Piece
-
ASTM D217 Cone Penetration of Lubricating Grease TesterUS$ 2000 - 2100MOQ: 1 Piece
