Contact Platform Support
Help CenterHST HENSGRAND ZXQ-2 ZXQ-5 Automatic HOT Metallographic Inlaying Machine/ Sample Specimen Mounting Press Machine
Related Products
-
HST101-A Binocular Inverted Metallurgical MicroscopeNegotiableMOQ: 1 -
ZXQ-5ST 22mm, 30mm, 45mm Touch Screen Sample Inlaying MachineNegotiableMOQ: 1
-
ZXQ-5ST Touch Screen Sample Mounting PressNegotiableMOQ: 1
-
LQ-80Z Metallographic Automatic Specimen Cutting MachineNegotiableMOQ: 1
-
HST BJ-X Rotatable Digital Upright Metallurgical Microscope Binocular MicroscopeNegotiableMOQ: 1
XQ-2B metallographic specimen inlaying machine metallurgical sample mounting press
1. Application:
Model ZXQ-5 automatic touch screen metallographic specimen mounting presses a kind of full automatic mounting press, equipped with in-out water cooling system. It is suitable for the heat mounting (thermohardening & thermo plastic) for all kinds of materials. After the parameters such as heating temperature, heat preserving time and applied force etc. are set up, put the specimen and mounting material into the machine, close the cover and press the start button, then the machine will finish the job automatically. It is not necessary for the operator to be on duty. According to different requirements of the material, there are four kinds of molds that can be chosen to meet the demands at will. Also it is available to prepare two pieces of specimens at the same time, the capacity is doubled.
2. Main specifications:
|
Model |
ZXQ-5 |
|
Diameter of specimen |
Ø25mm, Ø30mm, Ø40mm, Ø50mm |
|
Cooling method |
water cooling |
|
Max. power consumption |
1600W |
|
Setting range of system pressure intensity |
0-2MPa (corresponding preparing) |
|
Temperature setting range |
0-180℃ |
|
Automatic cooling temperature range |
40-90℃ |
|
Setting of Heat Holding Time: |
0~99 min. 99 sec. |
|
Net weight |
110Kg |
|
Power supply |
single phase, 220V, 50Hz |
|
Dimension |
615mm×510mm×500mm |
CE certificate: Metallographic Lab Euqipment HST model
Contact me : Adela
Tel/WhatsApp :+86-15866777131
Email: adela at
The biggest manufacturer is in China, the top quality is in China, the best service is also in China !
Please believe Hengsgrand, believe China Power !
We sincerely look forward to cooperation with you !
Look forward to your inquiry !
Send Inquiry to This Supplier
You May Also Like
-
100X-500X Portable Metallographical Field Microscope for Pipe InspectionNegotiableMOQ: 1
-
A15.0505-A 50x-500x 6 Inch Trinocular Upright Metallurgical Wafer Inspection MicroscopeNegotiableMOQ: 1
-
HST A12.202-AW Inverted Metallurgical MicroscopeNegotiableMOQ: 1
-
A15.0505-CW Computer Type Trinocular Upright Multifunction Metallographic Microscope With Polarizing Darkfield And Dual LightsNegotiableMOQ: 1
-
50X-600X Reflected and Transmitted Illumination Digital Metallurgraphy MicroscopeNegotiableMOQ: 1
-
MP-2B Diameter 200mm 250mm Metallographic Equipment Electronic Grinding Polishing MachineNegotiableMOQ: 1
-
Metallographic Sample Machine for Metallic Grinding&polishingNegotiableMOQ: 1
-
HST MP-2B Diameter 200mm 250mm Metallographic Equipment Electronic Grinding Polishing MachineUS$ 5598.32 - 8397.48MOQ: 1 Set
-
QG4 Metallographic Precision Cutter Metallographic Sample Specimen Cutting MachineNegotiableMOQ: 1
-
Mopao 2S 300mm Diameter Dual-disk Dual-control Metallographic Grinding Polishing MachineNegotiableMOQ: 1
