Contact Platform Support
Help CenterASTM D1119 Engine Cooling and Anti-Rust Agent Ash Content Tester
Product Spotlights
Related Products
-
ASTM D1122 Density of Engine Coolants TesterUS$ 2000 - 2400MOQ: 1 Piece -
ASTM D1287 Engine Coolant Antifreeze and Antirust Agent PH Value TesterUS$ 900 - 1000MOQ: 1 Piece
-
ASTM D1384 ADDITION Corrosion Test for Engine Coolants TesterUS$ 5700 - 5800MOQ: 1 Piece
-
ASTM D1177 ADDITION Lab Automatic Freezing Point of Engine Coolants TesterUS$ 4500 - 5000MOQ: 1 Piece
-
ASTM D2809 Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants TesterUS$ 23000 - 23900MOQ: 1 Piece
Engine Cooling and Anti-Rust Agent Ash Content Tester
Product Model: JF0067
Introduction
The measuring principle of this instrument is to vaporize or burn the sample under certain conditions, then burn it in a strong heat source, and calcine the solid residue. Therefore, the ash content of the test product is determined. The instrument is suitable for detecting unused commercial engine coolant and liquid rust inhibitor, and can also be used to identify the type of coolant and rust inhibitor, but it is not suitable for determining the content of total inhibitors.
Technical Parameter
1. Applicable standard: SH/T0067
2. Heating method: high-quality electric furnace wire heating
3. Temperature control method: digital display PID temperature controller
4. Temperature control range: normal temperature～900℃
5. Temperature control accuracy: ±10℃
6. Working power supply: AC220V/50Hz
7. Machine power: 2500W
8. Instrument size: 400*460*620mm
9. Net weight: 42KG
Performance characteristics
1. Hot ceramic furnace, good heat preservation effect, avoid burns to staff;
2. Microcomputer processing and PID control, digital display, accuracy ±0.1℃ PT100 sensor;
3. Porcelain silicon evaporating dish, 50～100ml, 120～150ml, meet the standard requirements;
4. Loose-leaf furnace door, easy to switch;
5. The electrical control box is separated from the heating box to reduce the damage to the electrical box caused by high temperature;
6. Split structure, easy to operate;
7. High-quality electric furnace wire heating to prolong the service life;
8. The casing is formed by high-quality cold-rolled steel plate molds;
Send Inquiry to This Supplier
You May Also Like
-
ASTM D2570 Simulated Service Corrosion Testing of Engine Coolants TesterUS$ 22400 - 22500MOQ: 1 Piece
-
ASTM D1120 Boiling Point of Engine Coolants TesterUS$ 450 - 500MOQ: 1 Piece
-
ASTM D1120 Engine Coolants Equilibrium Reflux Boiling Point Tester ERBPUS$ 500 - 550MOQ: 1 Piece
-
ASTM D1119 Engine Cooling and Anti-Rust Agent Ash Content TesterUS$ 1580 - 1800MOQ: 1 Piece
-
ASTM D1122 Density of Engine Coolants Tester Digital Density MeterUS$ 2000 - 2388MOQ: 1 Piece
-
Brake Fluid Antioxidant TesterUS$ 3000 - 3400MOQ: 1 Piece
-
Aluminum Alloy Corrosion of Engine Coolant TesterUS$ 4000 - 5100MOQ: 1 Piece
-
ASTM D482 Ash From Petroleum Products TesterUS$ 1500 - 2000MOQ: 1 Piece
-
ASTM D1384 Auto Corrosion for Engine Coolants TesterUS$ 3800 - 4000MOQ: 1 Set
-
ISO4925 Brake Fluid Stroke Simulation Test MachineUS$ 30300 - 30400MOQ: 1 Piece
