Contact Platform Support
Help CenterASTM D2570 Simulated Service Corrosion Testing of Engine Coolants Tester
Product Spotlights
Related Products
-
ASTM D1120 Boiling Point of Engine Coolants TesterUS$ 450 - 500MOQ: 1 Piece -
ASTM D1120 Engine Coolants Equilibrium Reflux Boiling Point Tester ERBPUS$ 500 - 550MOQ: 1 Piece
-
ASTM D1119 Engine Cooling and Anti-Rust Agent Ash Content TesterUS$ 1580 - 1800MOQ: 1 Piece
-
ASTM D1122 Density of Engine Coolants Tester Digital Density MeterUS$ 2000 - 2388MOQ: 1 Piece
-
Brake Fluid Antioxidant TesterUS$ 3000 - 3400MOQ: 1 Piece
Simulated Service Corrosion Testing of Engine Coolants Tester
Product model: JF0088
Product Introduction
In a closed system consisting of a reservoir, a water pump, a radiator and a rubber tube, the sample was circulated for 1064 hours at 88°C and a certain flow rate. The weight loss of the sheet and the visual inspection of the state surface of the inner surface of each component are determined, and the performance change of the sample is determined by analyzing the sample taken from the system periodically during the test cycle.
Technical Parameter
1. Applicable standard: ASTM 2570 SH/T0088
2. Environmental requirements: 20℃～25℃ humidity
3. Fuse: 20A
4. Temperature control accuracy: ±3℃
5. Resolution (measurement): 0.1℃
6. Temperature control range: normal temperature~88℃
7. Flow range: 0～95L/min
8. Flow control accuracy: ±5%
9. Working power supply: AC220,240V 50,60HZ
10. Power of the whole machine: 7KW
Performance characteristics
1. The instrument consists of operation and display, heating control, speed control, pressure control, flow control system and supporting components;
2. Motor: used for coolant circulation drive, linked with water pump;
3. Water pump: provide the circulating flow required by the standard;
4. Condenser: reduce the test pressure and simulate the working conditions of automobiles;
5. Metal test piece: simulate metal corrosion conditions;
6. Reservoir: Provide catalytic effect;
7. Glass tube: observe the circulation state of the sample;
Send Inquiry to This Supplier
You May Also Like
-
Aluminum Alloy Corrosion of Engine Coolant TesterUS$ 4000 - 5100MOQ: 1 Piece
-
ASTM D482 Ash From Petroleum Products TesterUS$ 1500 - 2000MOQ: 1 Piece
-
ASTM D1384 Auto Corrosion for Engine Coolants TesterUS$ 3800 - 4000MOQ: 1 Set
-
ISO4925 Brake Fluid Stroke Simulation Test MachineUS$ 30300 - 30400MOQ: 1 Piece
-
GB/T12981 Brake Fluid Wet Balance Reflux Boiling Point TesterUS$ 450 - 500MOQ: 1 Piece
-
GB/T12981 Brake Fluid Metal Test Piece Corrosion TesterUS$ 2000 - 2100MOQ: 1 Piece
-
GB/T12981 Brake Fluid Low Temperature Fluidity TesterUS$ 2000 - 2100MOQ: 1 Piece
-
Brake Fluid Evaporative Loss TesterNegotiableMOQ: 1 Piece
-
Brake Fluid Water Content TesterNegotiableMOQ: 1 Piece
-
Brake Fluid Antioxidant TesterNegotiableMOQ: 1 Piece
