Contact Platform Support
Help CenterIC697CPX928 IC697CPX928-FE GE CPU Unit Field I / O Module Control System
Related Products
-
IC697PWR724 IC697PWR748 GE Mechanical Protection Device of Steam Turbine SystemUS$ 113 - 166MOQ: 100 Pounds -
IC698CHS009 GE After Sales Service of Rack Nine Hole BaseUS$ 113 - 260MOQ: 100 Pounds
-
IC698CHS117C GE Full Series Spare Parts for Gas Turbine Clamp ModuleUS$ 165 - 260MOQ: 100 Pounds
-
IC698CPE010 IC698CPE020 GE CPU System Module Card ControlUS$ 100 - 200MOQ: 100 Pounds
-
IC698CPE030 IC698CPE040-JP GE CPU Ethernet CPU Control Memory Xchange ModuleUS$ 190 - 600MOQ: 100 Pounds
IC697CPX928 IC697CPX928-FE GE CPU unit field I / O module control system
IC697CPX928 IC697CPX928-FE GE CPU unit field I / O module control system
Our Email: 2235954483@qq.com
contact number:13313705507
contacts：HE
The IC697CPX928 is a Programmable Logic Controller manufactured by GE Automation and Controls. It is designed to fit into a single rack slot and comes with three built-in serial ports. A backplane mounted on the rack allows this device to communicate with several different modules. A run/stop control switch with three positions or specific software running from an attached computer is used to control the IC697CPX928. Seven on-board LED lights display operational status.
Features of this device include a 96MHz 80486DX4 microprocessor, floating point calculations, processor speeds of 0.4 microseconds for each Boolean function, 8K analog I/O, and 12K I/O of any mix. The IC697CPX928 supports several modules, including IC697 LAN interface modules and various display, coprocessor, communications, and link interface modules. IC660/61 bus controllers and IC697 discrete and analog I/O modules are also compatible with this device.
To program this device, connect it to a computer loaded with MS-DOS, Windows 95, or Windows NT. This connection is possible by way of a serial, parallel, or Ethernet interface. For Ethernet connections to the programming computer, special hardware is required. As the IC697CPX928 is programmed via software, hardware setup with DIP switches and jumpers is not required. Device configuration settings can be protected digitally via a password and physically by a keyswitch.
The IC697CPX928 provides six megabytes of user and program data memory. This memory is maintained by a lithium CMOS battery. Up to 256 kilobytes of optional flash memory (NVRAM) is also supported. Operating system firmware is stored in flash memory. Device disassembly or EPROM replacement is not required to update firmware.
In environments where temperatures reach 122 degrees Fahrenheit (50 Celsius), a fan capable of 70 cubic feet per minute (CFM) is required to prevent overheating.
The product manual contains detailed guidelines for installing the IC697CPX928. Rack power should be off before installing. The operation control switch should be in the stop position. The memory protection keyswitch should be in the off position. Place the CMOS battery into one of the battery connection slots. Insert the device into the rack and resume power.
Send Inquiry to This Supplier
You May Also Like
-
IC698ETM001 GE RX7i Independent Ethernet Interface ModuleUS$ 100 - 200MOQ: 100 Pounds
-
IC698PSA100 IC698PSA100D GE Programmable Gas Turbine System ModuleUS$ 100 - 200MOQ: 100 Pounds
-
IC698PSA350 GE PLC Power Module AC Power 350W RX7i InventoryUS$ 165 - 260MOQ: 100 Pounds
-
IC698RMX016 GE RX7i Redundant Memory Exchange 16MB Conformal CoatingUS$ 113 - 600MOQ: 100 Pounds
-
IS200AEADH4ADA GE DC Drive Module Quality ServiceUS$ 113 - 166MOQ: 100 Pounds
-
IS200DSPXH1DBD GE Gas Turbine Card (DCS Control System Card)US$ 113 - 260MOQ: 100 Pounds
-
IS200DTAIH1ABB IS200DTAIH1ACC GE Simplex Analog Input / Output Terminal BoardUS$ 100 - 200MOQ: 100 Pounds
-
IS200DTAOH1ABA GE Supply Card Module Industrial Control Spare PartsUS$ 100 - 200MOQ: 100 Pounds
-
IS200EGDMH1AFF GE Gas Turbine Card Series Is200 Multifunction CardUS$ 113 - 260MOQ: 100 Pounds
-
IS200EGPAG1BCA GE Control Card PCB Circuit BoardUS$ 190 - 200MOQ: 100 Pounds
