Contact Platform Support
Help CenterIC698PSA350 GE PLC Power Module AC Power 350W RX7i Inventory
Related Products
-
IC698RMX016 GE RX7i Redundant Memory Exchange 16MB Conformal CoatingUS$ 113 - 600MOQ: 100 Pounds -
IS200AEADH4ADA GE DC Drive Module Quality ServiceUS$ 113 - 166MOQ: 100 Pounds
-
IS200DSPXH1DBD GE Gas Turbine Card (DCS Control System Card)US$ 113 - 260MOQ: 100 Pounds
-
IS200DTAIH1ABB IS200DTAIH1ACC GE Simplex Analog Input / Output Terminal BoardUS$ 100 - 200MOQ: 100 Pounds
-
IS200DTAOH1ABA GE Supply Card Module Industrial Control Spare PartsUS$ 100 - 200MOQ: 100 Pounds
IC698PSA350 GE PLC power module AC Power 350W RX7i inventory
IC698PSA350 GE PLC power module AC Power 350W RX7i inventory
Our Email: 2235954483@qq.com
contact number:13313705507
contacts：HE
PACSystems RX7i CPUs with firmware versions 1.50 or later support
IC697PCM711 modules with firmware versions 4.05 or later. You must ensure
that you are using the correct firmware version of the PCM because the CPU
cannot check the PCM’s firmware version. (The module’s firmware version can be
found on a label attached to the EEPROM.)
PACSystems does not support the following for IC697PCM711:
▪ Connecting Machine Edition to the CPU through the IC697PCM711 module’s
serial ports.
▪ Access to Symbolic variables.
▪ WAIT mode COMMREQs.
▪ The following C functions are not supported:
chk_genius_bus
chk_genius_device
get_cpu_type_rev
get_memtype_sizes
get_one_rackfault
get_rack_slot_faults
▪ The C function write_dev will not write to read only reference tables (%S
references, transition bits, and override bits). If this is attempted, the call will
fail at run time and return an error code.
The following restrictions apply when using the IC697PCM711 with PACSystems:
%W memory partially supported. Only offsets 0-65535 of %W can be accessed
via the PCM.
▪ The Program Name is currently always LDPROG1 for PACSystems.
▪ In case of ERROR NACK, the Control Program number, privilege level and
other piggyback status data will be set to 0.
▪ If an application program running on the PCM accesses the VME bus, the
VME addresses being used by that program must be updated to agree with
the PACSystems RX7i VME addressing assignments. PACSystems RX7i
VME address assignments are described in the PACSystems RX7i User’s
Guide to Integration of VME Modules, GFK-2235.
▪ PACSystems CPUs return the major/minor type of the Series 90-70 CPX935
(major type 12, minor type 35) to the PCM scratch pad memory when
communicating with a PCM.
▪ If your RX7i application program needs to access the PCM’s dual port
memory, use the BUS READ and WRITE functions. When accessing the
PCM, set the Region parameter on the function block to 1. (For the PCM,
region 1 is predefined to be the module's entire dual port memory.)
Note: For details on operation of the IC697PCM711, refer to the Programmable
Coprocessor Module and Support Software User’s Manual, GFK-0255.
Send Inquiry to This Supplier
You May Also Like
-
IS200EGDMH1AFF GE Gas Turbine Card Series Is200 Multifunction CardUS$ 113 - 260MOQ: 100 Pounds
-
IS200EGPAG1BCA GE Control Card PCB Circuit BoardUS$ 190 - 200MOQ: 100 Pounds
-
IS200EPSMG1AEC IS200EPSMG1AED GE Circuit Board CPU Processor Module Power ModuleUS$ 100 - 260MOQ: 100 Pounds
-
IS200EPSMG2ADC IS200EPSMG2ADO IS200EPSMG2AEC GE Gas Turbine Series Is200 Card ModuleUS$ 113 - 260MOQ: 100 Pounds
-
IS200ERDDH1ABA GE DCS Control Gas Turbine Card Industrial Control SystemUS$ 100 - 200MOQ: 100 Pounds
-
IS200ERIOH1AAA GE Multi Functional Spare Parts Gas Turbine Card (original)US$ 113 - 260MOQ: 100 Pounds
-
IS200EROCH1ABB GE Industrial Control Industry Integration Can be Consulted OnlineUS$ 190 - 600MOQ: 100 Pounds
-
IS200EXHSG3AEC IS200HSLAH2ADE GE Static Exciter Terminal Block ModuleUS$ 165 - 260MOQ: 100 Pounds
-
IS200JPDDG1AAA IS200PMCIH1ABA GE Card Module for Electrical and Mechanical EquipmentUS$ 113 - 200MOQ: 100 Pounds
-
IS200SAMBH1ABA IS200SDIIH1ADB GE Industrial Control Industry Gas Turbine System CardUS$ 190 - 260MOQ: 100 Pounds
