Module spare partsIC698CRE040

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules / cards, controllers, touch screens, servo drivers.

Advantages: supply of imported original products, professional production parts,

Fast delivery, accurate delivery time,

The main brands include ABB Bailey, Ge / fuanc, Foxboro, Invensys Triconex, Bently, A-B Rockwell, Emerson, ovation, Motorola, xyvom, Honeywell, Rexroth, KUKA, Ni, Deif, Yokogawa, Woodward, Ryan, Schneider, Yaskawa, Moog, prosoft and other brands

5206 BAD MESSAGES This diagnostics counter increases by one every time the ACS 140 finds any kind of communication error. During normal operation, this counter hardly ever increases. 5207 GOOD MESSAGES This diagnostics counter increases by one every time a valid Modbus message has been received by the ACS 140. During normal operation, this counter increases constantly. 5208 BUFFER OVERRUNS The longest possible message length for the ACS 140 is 32 bytes. If a message exceeding 32 bytes is received, this diagnostic counter increases by one every time a character is received and cannot be placed in the buffer. 5209 FRAME ERRORS This diagnostic counter increases by one every time when a character with a framing error is received from the bus. • Communication speed settings of the devices connected to the bus differ. • Ambient noise levels may be too high. 5210 PARITY ERRORS This diagnostic counter increases by one every time when a character with a parity error is received from the bus. • Parity settings of the devices connected in the bus differ. • Ambient noise levels may be too high. 5211 CRC ERRORS This diagnostic counter increases by one every time when a message with a CRC error is received. • Ambient noise levels may be too high. • CRC calculation is not performed correctly. 5212 BUSY ERRORS In Modbus network, only one device can transmit at any given time. This diagnostic counter increases by one every time the ACS 140 receives a character from the bus while it is still processing the previous message. 5213 SER FAULT MEM 1 Last Modbus exception code sent. Refer to "Exception Codes", starting page 23. 5214 SER FAULT MEM 2 Previous Modbus exception code sent. 5215 SER FAULT MEM 3 Oldest Modbus exception cod