Contact Platform Support
Help CenterModule Spare Parts07AC91 GJR5252300R0101
Related Products
-
Module Spare Parts 07DC91C GJR5251400R0202US$ 1 - 100000MOQ: 1 Piece -
Module Spare Parts 07EA90-SI GJR5251200R0101US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 07KR51 1SBP260011R1001US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 07KT98 GJR5253100R3160US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 086318-002 086318-501US$ 1 - 100000MOQ: 1 Piece
Focus on DCS, PLC, robot control system and large servo system.
Main products: various modules / cards, controllers, touch screens, servo drivers.
Advantages: supply of imported original products, professional production parts,
Fast delivery, accurate delivery time,
The main brands include ABB Bailey, Ge / fuanc, Foxboro, Invensys Triconex, Bently, A-B Rockwell, Emerson, ovation, Motorola, xyvom, Honeywell, Rexroth, KUKA, Ni, Deif, Yokogawa, Woodward, Ryan, Schneider, Yaskawa, Moog, prosoft and other brands
| 07AC91 GJR5252300R0101 |
During A/C PRVC mode, the ventilator delivers mechanical breaths of the set tidal volume (VT) at intervals based on the set respiratory rate (Rate). For each breath, the ventilator adjusts the inspiratory pressure to use the lowest pressure required to deliver the tidal volume. Actual ventilation settings may be different if breath timing settings (Timing and Flow) have been changed. To determine the patient’s lung compliance, the ventilator delivers volume-controlled ventilation for 10 seconds or two breath periods, whichever is longer when the mode is initiated. Based on the patient’s lung compliance, the inspiratory pressure is established and used for the subsequent breaths. The ventilator uses the following pressure range when adjusting inspiratory pressure: • Low limit: PEEP + Pmin • High limit: Pmax - 5 cmH2O The difference in inspiratory pressure between breaths does not exceed ± 3 cmH2O. If a high airway pressure alarm is active for the current breath, the next breath’s pressure target is 0.5 cmH2O lower. In A/C PRVC mode, assist control is available to synchronize mechanical breaths to the patients spontaneous efforts and to allow triggering of additional mechanical breaths. With assist control disabled, the patient could draw spontaneous breaths at the set PEEP level during the expiratory phase. To set Assist Control, select Current Mode > Mode Settings and select Assist Control. Tube Comp, Leak Comp, and Trigger Comp may be set if desired. The following settings are available in A/C PRVC mode:
Send Inquiry to This Supplier
You May Also Like
-
Module Spare Parts 086339-001 004707001474US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 0880001-01US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts104X905BA603 G-95-149-H-9550US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts106M1081-01US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 10QT01 GJR2209300R0001 10QT01A-ER0001US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 216EA62 1MRB178066R1E 1MRB150083R1E 1MRB300162R0008US$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 216NG63A HESG441635R1 HESG216877KUS$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 216VC62AUS$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 2364-SPM03AUS$ 1 - 100000MOQ: 1 Piece
-
Module Spare Parts 3200-1214-03US$ 1 - 100000MOQ: 1 Piece
