Module spare parts 05701-A-0502

Focus on DCS, PLC, robot control system and large servo system.

Main products: various modules / cards, controllers, touch screens, servo drivers.

Advantages: supply of imported original products, professional production parts,

Fast delivery, accurate delivery time,

The main brands include ABB Bailey, Ge / fuanc, Foxboro, Invensys Triconex, Bently, A-B Rockwell, Emerson, ovation, Motorola, xyvom, Honeywell, Rexroth, KUKA, Ni, Deif, Yokogawa, Woodward, Ryan, Schneider, Yaskawa, Moog, prosoft and other brands

Backup mode is available if the ventilator detects insufficient ventilation in modes that allow spontaneous breaths. When enabled, the ventilator automatically enters the set Backup mode if either of the following occur: • The Apnea alarm is activated. • The patient’s expired minute volume (MVexp) is below 50% of the set low MVexp alarm. The set Backup mode is shown under the Backup mode check box in Current Mode > Mode Settings . To enable Backup mode, select the check box. Backup settings are a subset of available settings in each ventilation mode. Adjust Backup settings in Current Mode > Mode Settings > Backup Settings. Settings that are not designated as Backup settings remain at the current value when the ventilator transitions to the set Backup mode. Ensure that all users at the facility have been trained and notified of the facility default Backup mode settings. Before deactivating backup ventilation for a specific mode, ensure that all users at the facility have been trained and notified of these settings. Backup mode is available in the following ventilation modes: • SIMV VC • SIMV PC • SIMV PRVC • BiLevel • BiLevel VG • CPAP/PS • VS • APRV The following ventilation modes may be set as the Backup mode: • A/C VC • A/C PC • A/C PRVC • SIMV VC • SIMV PC • SIMV PRVC • BiLevel • BiLevel VG