PP825 3BSE042240R1 ABB Display screen display unit module

PP825 3BSE042240R1 ABB Display screen display unit module

PP825 3BSE042240R1 ABB Display screen display unit module

Our Email: 2235954483@qq.com

contact number:13313705507

contacts：HE

When equipped with the specified Control Software, the AC 800M Controller acts

either as a stand-alone process controller, or as a controller performing local control

tasks in a control network consisting of many interconnected controllers, operator

stations and servers.

Various I/O systems can be connected to the AC 800M Controller, either directly

(S800 I/O) or via PROFIBUS DP or FOUNDATION Fieldbus.

The AC 800M is delivered without Control Software. To provide the controller

with Control Software, first load the firmware and then create the application

separately using the Control Builder M engineering tool.

The AC 800M Controller consists of a selection of units mounted on horizontal

DIN-rails, which can be housed within an enclosure. The majority of units consist of

a base mounting plate and removable cover attached with screws.

The baseplate, which is always mounted onto the DIN-rail, carries the majority of

the connections to processor, power supplies and communication interfaces, as well

as the connections to the external buses and systems.

The AC 800M Controller provides a cost-effective, low-maintenance solution for

applications ranging from small Programmable Logic Controller (PLC) to advanced

Distributed Control Systems (DCS) control applications and combined DCS, and

High Integrity systems control applications.

In the AC 800M High Integrity Controller, it is possible to run both non-SIL and

SIL classified applications. The AC 800M HI consist of PM865 with

SM810/SM811 or PM867 with SM812 and a High Integrity version of Control

Software, and is also available in redundant configuration. AC 800M HI requires the

use of SIL certified S800 I/O units in SIL classified applications. If the application