LV XLPE Insulation Power Cables 0.6/1kV, 1.8/3kV

APPLICATION

This cable is suitable for electric power transmission and distribution system for mine with rated voltage 0.6/1kV or 1.8/3kV.This cable is suitable for fixed installation.

STANDARDS

MT818.13, GB/T12706.2, IEC60502, IEC60228, Other customer's requirements

TYPICAL CABLE TYPE & CONSTRUCTION

MYJV: Copper conductor XLPE insulation, PVC outer sheath (Cu/xlpe/pvc)

MYJV22: Copper conductor XLPE insulation, Lapped inner covering, double galvanized steel tape armoured, PVC outer sheath(Cu/xlpe/dsta/pvc)

MYJV32: Copper conductor XLPE insulation, PVC innersheath, fine galvanized steel wire armoured, PVC outer sheath(Cu/xlpe/pvc/swa/pvc)

MYJV42: Copper conductor XLPE insulation, PVC innersheath, thick galvanized steel wire armoured, PVC outer sheath(Cu/xlpe/pvc/swa/pvc)

NUMBER OF CORES & CROSS-SECTIONAL AREA

3-Core: 1.5mm2 ～300mm2

4-Core: 4mm2 ～ 300mm2

CORE IDENTIFICATION

3-core：yellow, green, red

4-core：yellow, green, red, blue

Or other colour upon request

SHEATH COLOUR

Black,  Or as per customer's requirements

USAGE CHARACTERISTICS

Rated voltage, Uo/U(Um): 0.6/1(1.2)kV, 1.8/3(3.6kV)

Maximum continuous conductor operating temperature: 90℃

Maximum conductor short circuit temperature: 250℃ (maximum duration 5Sec.)

Minimum installation ambient temperature: 0℃

Minimum bending radius for installation: 15xO.D.

CERTIFICATION

MA certification

OPTIONAL FEATURES

Flame retardant as per MT 386

Low temperature

UV resistant

Mineral oil resistant

Anti-termite/anti-rodent