Oil Separation From Lubricating Grease During Storage Tester ASTM D1742
Product Introduction
This instrument is designed and manufactured in accordance with the ASTM D1742 standard; it is used to measure the oil separation of grease with a consistency greater than No. 0 during storage. The test principle is as follows: put the grease on a 75μm filter screen, continue the test at 25℃±1℃ and 1.72kPa±0.07kPa air pressure for 24 hours, then weigh the quality of the oil separated and dropped into the oil container.
Technical Parameter
1. Applicable standard: ASTM D1742
2. Test unit: 2 units
3. Control temperature: 25℃±1℃
4. Pressure range: 1.72kPa±0.07kPa
5. Filter aperture: 75μm
6. Pressure display: precision digital pressure gauge
7. Working power supply: AC220V 50HZ
8. Power of the whole machine: 1200W
9. Instrument size: 490*500*880mm
10. Net weight: 60KG
Main Feature
1. The digital meter displays the pressure, and the results are clear at a glance
2. High-precision needle valve control pressure
3. Temperature display: digital display thermostat
Send Inquiry to This Supplier
You May Also Like
-
Lubricant Gear Oil Channel Point Tester SH/T0030NegotiableMOQ: 1 Set
-
Evaporation of Rust Preventive Oils TesterNegotiableMOQ: 1 Set
-
Lubricating Grease Relative Viscosity TesterNegotiableMOQ: 1 Set
-
Automatic Lubricating Oil Evaporation Loss Tester ASTM D5800NegotiableMOQ: 1 Set
-
Rusting Grease Oxygen Inhalation Tester JIS K2246NegotiableMOQ: 1 Set
-
Automatic Engine Oil Oxidation Stability Tester Thin Film Oxygen Absorption Method ASTM D4742NegotiableMOQ: 1 Set
-
Shear Stability of Polymer Containing Fluids Tester Diesel Fuel Injector Nozzles ASTM D6278NegotiableMOQ: 1 Set
-
Lubricating Grease Water Resistance TesterNegotiableMOQ: 1 Set
-
Lubricating Grease Roll Stability Tester ASTM D1831NegotiableMOQ: 1 Set
-
Extreme Pressure Lubricating Oil Oxidation Tester ASTM D2893NegotiableMOQ: 1 Set