Evaporation of Rust Preventive Oils Tester
Technical Parameter
1. Applicable standard JISK2246 SH/T0035
2. Temperature range from room temperature to 107℃
3. Rotation mode motor drive
4. Heating method: electric furnace wire heating
5. Working unit 9 units
6. Temperature control* degree ±0.1℃
7. Working power supply AC220V/50HZ
8. The power of the whole machine is 3KW
9. Timing mode digital timer
Performance Characteristics
1. Standard glass container 53×56mm;
2. Lead rotating disc, can make 9 samples at the same time;
3. The stepping motor drives the rotation, the rotation speed is 5-6r/min;
4. Microcomputer temperature controller, digital display, maximum ±0.1℃ PT100 sensor;
5. Digital timer, recording working time, with buzzer;
6. Stainless steel air heating bath;
7. Transparent observation window;
8. There is an air inlet at the bottom of the instrument, and a movable window to adjust the air output at the top;
9. The thermometer can be inserted into the heating box to correct the temperature;
Send Inquiry to This Supplier
You May Also Like
-
Lubricating Grease Water Resistance TesterNegotiableMOQ: 1 Set
-
Lubricating Grease Roll Stability Tester ASTM D1831NegotiableMOQ: 1 Set
-
Extreme Pressure Lubricating Oil Oxidation Tester ASTM D2893NegotiableMOQ: 1 Set
-
Petroleum Ramsbottom Carbon Residue Tester ISO4262 ASTM D482NegotiableMOQ: 1 Set
-
Petroleum Carbon Residue Tester ASTM D482NegotiableMOQ: 1 Set
-
Automatic Lubricant Oxidation Stability Tester Metal Bath ASTM D2272NegotiableMOQ: 1 Set
-
Hydraulic Oil Thermal Stability TesterNegotiableMOQ: 1 Set
-
Hydraulic Oil Filterability TesterNegotiableMOQ: 1 Set
-
Petroleum Products Water Soluble Acid and Alkali TesterNegotiableMOQ: 1 Set
-
Semi-Automatic Opening Flash Point TesterNegotiableMOQ: 1 Set