Advantages:
- Large HD full viewing angle and high-brightness screen friendly to your eyes, long standby time
- Duplexer debugging function and performance of the UV band frequency, and the dynamic reaches 80db
- The operating menu is set according to desktop PC for HP
- Almost full touch operation, simple and friendly interface, fast operation
- The screen can display up to 4pcs mark points at a time, and their positions can be moved
- Chinese and English interface can be switched
- Excellent performance and easy operation

Description:
NanoVNA-F V2 portable vector network analyzer is a new generation product developed on the basis of NanoVNA-F. It adopts 4.3-inch IPS LCD screen and aluminum alloy case, standard 5000mAh large-capacity lithium battery, battery life up to 7 hours. It supports touch screen and side button operation, support Chinese and English interface. The design of this product is based on NanoVNA of edy555 and SAA V2 for OwOcomm, and deep optimization of the software is made on the basis of the previous generation product NanoVNA-F. The operation interface is compatible with NanoVNA-F, the measurement range is extended to 3GHz, and the dynamic range is larger. The measurement is more accurate and the operation is more convenient.

Features:
1. 4.3-inch IPS LCD display, resolution 800*480, ultra-wide viewing angle, long-term use does not hurt your eyes;
2. All aluminum alloy case, sturdy and durable, effectively shielding electromagnetic interference to ensure measurement accuracy;
3. The body size is 125mm*75mm*20mm, compact and portable;
4. The radio frequency interface is SMA, which is convenient for connecting all kinds of DUTs;
5. 5000mAh large-capacity lithium battery, battery life up to 7 hours;
6. Full touch screen design, with 3 side buttons at the same time, flexible and convenient operation;
7. Support Chinese and English interface;
8. Optimized UI design, convenient for users to perform measurement operations;
9. Support screen brightness adjustment;
10. The firmware can be upgraded through a virtual U disk, no programmer is needed, and the firmware can be upgraded through the included USB type-c data cable;
11. Standard high-quality calibration parts and RG405 phase-stable cable to ensure calibration accuracy;
12. A USB power output interface is designed to support 5V/1A power output;
13. Using 2A high current charging IC, the charging time is shorter;
14. Supporting host computer software, the host computer supports Chinese and English interfaces;
15. The screen image of the device can be obtained by taking a screenshot of the host computer.

Product Performance:
- Frequency range: 50kHz-3GHz
- RF output power: -9dBm (error within 1GHz: ±1dB)
- Frequency accuracy: <0.5ppm
- S21 dynamic range: 70dB (1.5GHz), 60dB (3GHz)
- S11 dynamic range: 50dB (1.5GHz), 40dB (3GHz)
- 2-port return loss: 20dB typ (1.5GHz), 13dB min (3GHz)
- Number of calibration points: 101 points
- Number of scanning points: 101 points
- Number of traces: 4
- Number of mark points: 4 (The mark point bar can be moved up and down on the screen)
- USB interface: USB Type-C communication mode: CDC (serial)
- Setting save: 5 groups (After saving, it can be directly recalled when it is used next time, no need to recalibrate, and the saved parameters before the last shutdown will be automatically recalled when it is turned on next time)
- Support calibration result interpolation, can measure without recalibration after adjusting the measurement frequency band
- Scan time: about 1.9s/1 time (50kHz ~ 3000MHz full frequency band)
- Can measure S parameters, voltage standing wave ratio, Smith chart, phase, group delay, etc.

Applications:
- NanoVNA-F V2 has a high dynamic range and can be used to test UV duplexers
- Measure 915MHz antenna
- Measure 868MHz antenna
- Measure 2.4G microstrip filter

Package Included:
- 1 x Host
- 1 x SMA Open Circuit Calibration Part
- 1 x SMA Short-Circuit Calibration Kit
- 1 x SMA 50Ω Load Calibration Kit
- 1 x SMA-KK Double Head Female Adapter
- 1 x SMA-JJ Double Head Male Adapter
- 1 x SMA-JKW Elbow Female To Male adapter
- 2 x 20cm SMA-JJ RG405 RF Cables
- 1 x USB Type-C Data Cable
- 1 x Stylus Pen

Package: Normally we use the standard exporting packaging. We also can according to clients' request .

 Shipping : 

1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier  we are co-operating at present.

2. By Air: Delivery from the Shanghai airport to customers’ destination city air port.

3. By Sea: Delivery from the Shanghai sea port .

Q1. Can I have a sample order?

A: Yes, we welcome sample order to test and check quality.

Q2. What about the lead time?

A: Samples arrived often need 3-5 days.

Q3. Do you have any MOQ (minimum order quality)limit?

A: Low MOQ, 1pc for sample checking is available.

Q4. How do you ship the goods and how long does it take to arrive?

A: We often ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping is also optional.

Q5. How to proceed an order?

A: Initially, let us know your requirements or application. Besides, We quote according to your requirements or our suggestions. Thirdly, customers confirms the samples and places deposit for formal order. Finally, We arrange the production.

Q6. Is it acceptable to print my logo on the product?

A: Yes. Please inform us formally before our product and confirm the design firstly based on our sample.

Q7: Do you offer guarantee for the products?

A: Yes, we offer one-year warranty for our products.

Q8: How to deal with the flaw?

A: Our products are produced in strict quality control system and the percent of pass is often maintained over 99.8%

Please do not hesitate to contact me if you need any further information

Whatsapp/Tel/Wechat: 8619902906050

Web: 

Address: Room 303 Building 2,Youpin Cultural and Creative Park,Zhangkeng,Minzhi Street,Longhua District,518131,Shenzhen,China(Mainland)