Home > Products > Tester Equipment > 50KHz-1.5GHz NanoVNA Vector Network Analyzer with 4" LCD Display For UHF Antenna NanoVNA-H4
50KHz-1.5GHz NanoVNA Vector Network Analyzer with 4" LCD Display For UHF Antenna NanoVNA-H4
- 1000 per Month
- T/T Credit Card
- mAT-180H 120W AUTO TUNER Automatic Antenna Ham Radio HF Auto-tuner for I-COM
- Handheld Hart475 Hart Field Communicator for Pressure Temperature Transmitter Calibration
- MTG-1000 Multifunction Timegrapher Watch Timing Machine Calibration Tools
- MR9270S 4-20mA Signal Generator Calibration Current Voltage Thermocouple
- 1Hz-15GHz RF Signal Generator Wideband Signal Generator with Power Adjustment Built-in OCXO
- CZE-7C Stereo Frequency Modulation Transmitter Adjustment 1W/7W Radio Emitter Combo with Antenna
Product Description
50KHz-1.5GHz NanoVNA Vector Network Analyzer with 4" LCD Display For UHF Antenna NanoVNA-H4
Features:
- With DC dimming method, 4" full-view LCD screen can be seen more clearly for outdoor uses, and more comfortable for indoor uses
- Optimized Electric Bridge: Making full use of the harmonics of Si5351, it can use the 5th harmonic to measure up to 1.5GHz
- When fundamental wave is used, the output level of CH0 is increased to 0dBm, making reflection measurement more accurate
- Solved the abnormality of NanoVNA-H when operating at around 6MHz before
- Redesigned power management circuit reduces power noise, USB power interference, and charging current
- Improved PCB layout
- Reserved UART interface for DIY expansion
- Lightweight ABS shell keeps the device well protected
Basic Parameters:
- ABS Shell: 75mm x 133mm x 18mm (excluding protrusions)
- Measurement Frequency: 50KHz ~ 1.5GHz
- RF Output: 0dbm (±2dB, fundamental wave)
- Frequency Accuracy: <2ppm
- Frequency Stability: <0.5ppm
- Measurement Range: 70dB (50kHz-300 MHz), (60dB (300M-900MHz), 40dB (0.9G-1.5GHz) enable expansion firmware)
Note: Please pay attention to the error caused by nonlinear transformation of the fundamental wave when using harmonic measurement.
- Port SWR: <1.1
- Display: 4" TFT (320 x 480)
- USB Interface: USB type-C; Communication Mode: CDC (serial)
- Power Supply: USB 5V 200mA. Maximum charging current 1A
- Number of Calibration Points: 101 (fixed)
- Number of Scanning Points: 101 (fixed)
- Display Tracking: 4, Marking: 4, Save Setting: 5
- Measurement of S-parameters, voltage standing wave ratio, phase, delay, Smith chart, time domain analysis, etc.
Package Included:
- 1 x NanoVNA Main Unit
- 2 x 15cm S-MA Male to Male RG316 RF Cables
- 1 x S-MA Female to Female Connector
- 1 x S-MA Simple Calibration Kit SHORT
- 1 x S-MA Simple Calibration Kit OPEN
- 1 x S-MA Simple Calibration Kit LOAD
- 1 x USB Type-C Data Cable
- 1 x Type-C to Type-C (For Android mobile phone connection)
Download Manuals & PC Control Software:
/s/1SXz5BsYJiAF-eUpFG_2l-g Password: kixh
Or /open?id=1-JViWLBOIzaHTdwdONX2RP8S4EgWxoND
Test Short-wave Antenna:
- The yellow line pictured is the standing wave ratio.
- Note: As the S-MA ports are made of cast copper, please not connect hard 50-7 / RG213 and other cables directly to the S-MA ports through M-to-S-MA connector to avoid damaging the S-MA ports. You can use the included S-MA cable to connect to the S-MA port as shown in the picture below, and then use M to S-MA connector.
Test UHF Antenna:
Test VHF Low-pass Filter:
Test 455K SSB Filter with Bandwidth 2.4K:
PC Software:
Computer software supports control and real-time display. And it support for exporting Touchstone (snp) files for various radio design and simulation software.
As a measuring device, accuracy is of great importance. Simple calibration parts are included in the package. We have calibrated the product's dual ports before delivery. When your measurement conditions change (for example, switching from a narrower calibration bandwidth to a wider measurement bandwidth with an extension cable measurement), you need to re-calibrate. After calibration, it is saved as setting 0, which can be used directly at the next boot, or it can be saved to the other 4 saved items through recall when needed.
The following figure is the comparison data of a V-band duplexer measured with NanoVNA and E5062A for Agilent under the same test conditions:
Package: Normally we use the standard exporting packaging. We also can according to clients' request .
Shipping :
1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier we are co-operating at present.
2. By Air: Delivery from the Shanghai airport to customers’ destination city air port.
3. By Sea: Delivery from the Shanghai sea port .
Aiming to provide high quanlity products and great service for buyer,we are strict on product quanlity control and offer instant communication service.Welcome to contact us!
Our Advantages:
- Source only the best consumer goods and ensure the highest quality.
- Streamline the buying and payment process, and make it as easy as possible.
- Help the customers all over the world discover products and manufacturers in China.
- The Shortest order processed time and speed delivery
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Samples arrived often need 3-5 days.
Q3. Do you have any MOQ (minimum order quality)limit?
A: Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: We often ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping is also optional.
Q5. How to proceed an order?
A: Initially, let us know your requirements or application. Besides, We quote according to your requirements or our suggestions. Thirdly, customers confirms the samples and places deposit for formal order. Finally, We arrange the production.
Q6. Is it acceptable to print my logo on the product?
A: Yes. Please inform us formally before our product and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer one-year warranty for our products.
Q8: How to deal with the flaw?
A: Our products are produced in strict quality control system and the percent of pass is often maintained over 99.8%
Please do not hesitate to contact me if you need any further information
Whatsapp/Tel/Wechat: 8619902906050
Web:
Address: Room 303 Building 2,Youpin Cultural and Creative Park,Zhangkeng,Minzhi Street,Longhua District,518131,Shenzhen,China(Mainland)
Contact Us
- Shenzhen Tianzhongtian Trading Co., Ltd.
Business&Industry | Comsumer&Electronics | Health&Care | Hobbies&Toys |
household products | Metal Detector | Tester Equipment | Ungrouped |
- CGJ-100 1.8-30MHz Mini Automatic Antenna Tuner with 0.91\" OLED Display For 5-100W Shortwave Radio Stations
- AD206 2MP Support Image Reversal Adjustable 7\" Display 8 LEDs 200X Andonstar Digital Microscope
- KVE60C 0.5MHz to 60MHz Meter HF Vector Color Graphic Impedance Antenna Analyzer
- DSO213 DS213 4 Channel 100MS/s MINI Nano DSO213 DS213 Professional Portable Digital Oscilloscope with X1 & X10 Probe
- AD207 3D Image Rotation Adjustable Bracket 7\" Screen 8 LEDs 100X 2MP Andonstar Digital Microscope
- 4-20mA/0-10V/mV LB78 Resistance Current Voltmeter Signal Generator Source Process Calibrator
- FPA101A Signal Power Amplifier Module 100W 100KHz for Digital DDS Function Signal Generator
- SEMY60-AC 60x60mm 2-Axis XY Micrometer Linear Stage Manual Linear Stage with Crossed-Roller Bearing
- SEMY40-AC 40x40mm Crossed-Roller Bearing 2-Axis XY Micrometer Linear Stage Manual Linear Stage
- XY40-R-30 40*40mm XY Axis Manual Displacement Platform Cross Roller Guide Precise Sliding Table
- Mini1300 HF/VHF/UHF 0.1-1300MHz Antenna Analyzer with 4.3\" TFT LCD Touch Screen
- Mini1300 0.1-1300MHz HF/VHF/UHF Antenna Analyzer with 4.3\" TFT LCD Touch Screen Aluminum Alloy Shell
- Wireless DC 80V 100A VOLT AMP AH SOC Remaining Capacity Battery Monitor Meter
- Mini Microscope Camera Stand Aluminum Alloy Microscope Stand with Holder For 32-34mm Microscope
- LB06 Multifunction Process Calibrator 0-24mA 0-11V/ mV Signal Generator with Hart Modbus Function
- mAT-30 HF-SSB Automatic Antenna Tuner 120W Automatic Ham Radio Auto Tuner for Yaesu
- Balun 1:49 100W 49:1 Magnetic Ring Barron for End Fed Short wave Antenna HAM Natural Resonance Frequency 7/14/21/28MHz
- SEMXYZ-80 XYZ 3-Axis Manual Linear Stage 80x80mm Micrometer Linear Stage wIth Crossed-Roller Bearing
- Noise Source Simple Spectrum Tracking Source High Flatness 0.2-2000M Noise Signal Generator
- 2.4'' 80V 300A-500A Wireless Voltmeter Ammeter Multimeter Voltage Ampere Power Watt Coulomb Capacity Time Temp
- M6013 Auto Range Multimeter Checker LCD Digital Capacitor Capacitance Tester Meter
- 4 Channel 100MS/s MINI Nano DSO213 DS213 Professional Portable 3\" Digital Oscilloscope with X1 & X10 Probe
- Deepace UWB-2 2.8GHz-11GHz Monopole Ultra-wideband Antenna Omnidirectional Antenna 3.8dBi Gain
- 7.83MHz Schumann Wave Generator Schumann Resonance Ultra-low FM783 Frequency Pulse Generator
Popular Searches
- 1238-6501 curtis controller
- curtis controller 1268-5403
- ac motor control
- controler ebikes
- cart control
- dc controls
- dc dc controller 2012
- dc lift motor controler
- lathe speed controler
- pwm for hho
- 1268-5403 curtis controller
- 1266-5201 curtis controller
- agv controller
- separately excited
- animation motor controller
- at motor controller
Find Similar Products By Category
- Mechanical Parts & Fabrication Services > Motor Accessories > Motor Controller
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-