Contact Platform Support
Help Center
Related Products
-
Specific Gravity Frame Hydrostatic Balance 5kg 10kg 15kg 20kg 30kgUS$ 300 - 1000MOQ: 1 Set -
M1 Class Weights and Weight Sets OIML-R111US$ 100 - 2000MOQ: 1 Set
-
F2 Class Stainless Steel Weights and Weight Set OIML-R111US$ 100 - 2000MOQ: 1 Set
-
M1 Class 1mg-500g Weight SetsUS$ 100 - 2000MOQ: 1 Set
-
Digital Dial Gauge 12.7mm 25.4mm 50.8mm 100mmUS$ 50 - 100MOQ: 1 Set
Standards: ASTM D4781, ASTM D4164, ASTM B 527, ISO 787-11, ISO 3953
This Tap powder density tester is composed of adjustable speed motor, vibration components, microcomputer and micro printer. The amplitude and the number of vibrations can be set by yourself. During the vibration process, the vibration component rotates at a small angle to ensure the uniformity of the material. It has the functions of automatic calculation and automatic printing of test results.
The Powder density refers to the mass corresponding to a unit volume of powder. Due to the existence of voids (or pores) between or within the particles in the powder, the density of the powder is usually less than the true density of the corresponding substance. Tapped density refers to the density of the powder contained in the container after being tapped under specified conditions.
Specifications
Model | Powden-100 | Powden-100A | Powden-100B |
Number of sample measurements | 1 | 2 | 3 |
Vibration amplitude | 1-15mm | 1-15mm | 1-15mm |
Vibration frequency | 0-300 times per min | 0-300 times per min | 0-300 times per min |
Single time vibrations number | 0-99999 adjustable | 0-99999 adjustable | 0-99999 adjustable |
Cylinder Specifications | 25ml,50ml,100ml,250ml | 25ml,50ml,100ml | 25ml,50ml,100ml |
Repeatability error | ±1% | ±1% | ±1% |
Accuracy | ±1% | ±1% | ±1% |
Result output | Built-in printer | Built-in printer | Built-in printer |
Send Inquiry to This Supplier
You May Also Like
-
Digital Dial Gauge With Data Acquisition FunctionUS$ 100 - 500MOQ: 1 Set
-
Caliper 150mm 200mm 300mm 500mm 600mm 1000mmUS$ 50 - 500MOQ: 1 Set
-
Stainless Steel Digital Calipers IP54 IP67 DIN 862US$ 50 - 500MOQ: 1 Set
-
Outside Micrometer 0.01mmUS$ 50 - 500MOQ: 1 Set
-
Two-jaw Inside Micrometer Internal MicrometerUS$ 50 - 500MOQ: 1 Set
-
Three-jaw Inside Micrometer 3-jaw Internal MicrometerUS$ 50 - 500MOQ: 1 Set
-
Micrometer Head 0-6.5mm 0-13mm 0-25mm 0-50mm Flat Sepheric HeadUS$ 10 - 100MOQ: 1 Set
-
Portable Digital Thickness Gauge 0-10mm 0-25mm 0.01mm 0.001mmUS$ 10 - 100MOQ: 1 Set
-
Carbon Steel Depth Gauge 150mm 200mm 300mm 500mm 1000mmUS$ 10 - 100MOQ: 1 Set
-
Digital Depth Gauge 150mm 200mm 300mmUS$ 10 - 100MOQ: 1 Set
