Home > Products > Septic tank > Large-Scale Customizable Winding FRP Septic Tank 1-200m3 Sewage Treatment Equipment
Large-Scale Customizable Winding FRP Septic Tank 1-200m3 Sewage Treatment Equipment
Negotiable
1 (Min.Order)
- 1000 per Month
- T/T Credit Card
You May Like
- 0.5m3-3m3 Cheap GRP Toilet Septic Tank FRP Sewer Drains Tank Greywater Septic Tank Manufacturer
- 200 gallon 500 gallon 1000 gallon 2000 gallon FRP GRP Fiberglass Sewer Tank SMC Molded Bio Septic Tank SMC Septic Tank
- Underground Biodigestor for Waste Water Treatment FRP Septic tanks for Toilet Drain System GRP Septic Tanks
- 500L - 5000L Small fiber water tank price frp tank water storage tank
- 2 m3 500 gallon SMC GRP FRP Household Small Septic Tank Price Fiberglass Septic Tank for Sewage Treatment
- 500 liter to 5000 litre 1.5m3 Small Septic Tank Fiberglass SMC Septic Tanks
Product Description
Product Description
With the increasingly severe environmental pollution caused by sewage in life, the FRP septic tank is based on the introduction of foreign domestic sewage treatment technology, combined with results of scientific research and engineering practices, using materials Polymer compounds, factory production, is efficient, energy saving light and economical domestic wastewater treatment equipment.
Why is the application of FRP septic tanks more and more extensive?
1. Brick septic tank: this is the most traditional construction process. It has been widely used for a long time. The process is mature. The initial standard atlas is basically brick, but the brick septic tank. There is a fatal deficiency: the tensile
strength is extremely low, and it is easy to cause cracks due to uneven settlement, especially in a septic tank with a relatively large capacity. The leak is almost 100%, and the severity of the leak has sometimes affected normal use, and with the strengthening of people's environmental awareness, they gradually began to adopt their second generation product, namely the septic tank of concrete (reinforced concrete).
2. Precast concrete septic tank: After fully understanding the deficiencies of brick septic tanks, people began using septic tanks (reinforced concrete), partially equipped with stressed steel bars, thus solving the low tensile strength of the brick It is susceptible to the disadvantage of uneven settlement of foundations and cracks. But with it, a new problem has arisen, that is, the construction period is longer (because it is a completely molten structure). Due to many problems in the design, construction, use and handling of mixed septic and brick tanks, more than 95% of septic tanks began to have serious leaks after 1-2 years of use. Due to lack of attention, leaks in septic tanks The problem has seriously contaminated the underground source of drinking water and the urban underground water supply pipe, and even more serious people have caused the building to lean to varying degrees.
In addition, due to the lack of technical content of traditional bricks and mixed septic tanks, the quality of the treated water is poor and the wastewater discharged seriously exceeds the standard, which greatly increases the workload of the treatment plant sewage water. Wastewater treated by the traditional septic tank is used in some areas without municipal pipe network. Direct discharge into the river and lake, causing serious damage to the river environment and the surrounding lake water. Traditional septic tanks have a low technical content, a poor corrosion function and a short cleaning cycle. If the daily maintenance management is not in place, there will be hidden dangers, such as biogas poisoning and explosion.
Why is the application of FRP septic tanks more and more extensive?
1. Brick septic tank: this is the most traditional construction process. It has been widely used for a long time. The process is mature. The initial standard atlas is basically brick, but the brick septic tank. There is a fatal deficiency: the tensile
strength is extremely low, and it is easy to cause cracks due to uneven settlement, especially in a septic tank with a relatively large capacity. The leak is almost 100%, and the severity of the leak has sometimes affected normal use, and with the strengthening of people's environmental awareness, they gradually began to adopt their second generation product, namely the septic tank of concrete (reinforced concrete).
2. Precast concrete septic tank: After fully understanding the deficiencies of brick septic tanks, people began using septic tanks (reinforced concrete), partially equipped with stressed steel bars, thus solving the low tensile strength of the brick It is susceptible to the disadvantage of uneven settlement of foundations and cracks. But with it, a new problem has arisen, that is, the construction period is longer (because it is a completely molten structure). Due to many problems in the design, construction, use and handling of mixed septic and brick tanks, more than 95% of septic tanks began to have serious leaks after 1-2 years of use. Due to lack of attention, leaks in septic tanks The problem has seriously contaminated the underground source of drinking water and the urban underground water supply pipe, and even more serious people have caused the building to lean to varying degrees.
In addition, due to the lack of technical content of traditional bricks and mixed septic tanks, the quality of the treated water is poor and the wastewater discharged seriously exceeds the standard, which greatly increases the workload of the treatment plant sewage water. Wastewater treated by the traditional septic tank is used in some areas without municipal pipe network. Direct discharge into the river and lake, causing serious damage to the river environment and the surrounding lake water. Traditional septic tanks have a low technical content, a poor corrosion function and a short cleaning cycle. If the daily maintenance management is not in place, there will be hidden dangers, such as biogas poisoning and explosion.
Characteristics of FRP winding septic tank
1. Installation and construction is fast and the construction period is extremely short
The factory integrates production, and it is integrally formed at one time. The construction site is hoisted in one time and can be installed in half a day, which greatly improves the construction efficiency, shortens the construction period and improves the economic and social benefits.
2, Small footprint
The product has a compact structure and a small footprint. The actual floor space is about 60% of the traditional septic tank, saving land resources.
3, Patented design, high compressive strength
The appearance of the product is cylindrical design. The two ends of the cylinder are designed with mechanical concave and convex surface. The body of the cylinder is designed with a circular dense corrugated curved surface structure. The compressive strength bearing capacity is high. After the construction is completed, the product can carry 40T. Trucks pass.
4, Material anti-corrosion, service life of more than 70 years
The product is made of high-strength glass fiber and unsaturated polyester resin. It has no corrosion, acid and alkali resistance, no aging and no deformation. The product body structure adopts a ring-shaped dense corrugated structure, which has high compression resistance, high impact strength and durability, and has a service life of more than 70 years under normal use
conditions.
5, Low cost of products, affordable
The cost of the product is less than 20% of the reinforced concrete septic tank, which is basically the same as the brick septic tank. The environmentally friendly septic tank is inexpensive and affordable to users of all walks of life, and is deeply loved by real estate companies and construction contractors.
6, Patented technology, good water treatment effect
The glass fiber reinforced septic tank is provided with a partition inside, and the water passage hole on the partition plate is displaced up and down to form a swirling flow, which avoids the short circuit and prolongs the actual residence time of the sewage; at the same time, the partition divides the whole tank into a plurality of parts: Including multi-stage biochemical
chamber, clarification chamber, etc., the biochemical interior is equipped with high-efficiency “KWS bio-filler”, and a large number of microorganisms are attached to the filler, so that the contact area and time of sewage and microorganisms are greatly increased. Improve the reaction efficiency, remove the solid and liquid organic matter in the septic tank, reduce the sludge, harmless, and treat the effluent to the third, second, first or middle water reuse standard that meets the national emission standards. standard.
7, No leakage, no pollution, truly environmental protection
The product is integrated and integrated, without joints, no leakage, no pollution, and completely solves the problem of polluting groundwater source after cracks in traditional brick septic tanks. The use of biotechnology to treat sewage has strengthened the function of anaerobic degradation of organic sewage in the septic tank, which greatly prolonged the cleaning time and improved economic, social and environmental benefits.
The factory integrates production, and it is integrally formed at one time. The construction site is hoisted in one time and can be installed in half a day, which greatly improves the construction efficiency, shortens the construction period and improves the economic and social benefits.
2, Small footprint
The product has a compact structure and a small footprint. The actual floor space is about 60% of the traditional septic tank, saving land resources.
3, Patented design, high compressive strength
The appearance of the product is cylindrical design. The two ends of the cylinder are designed with mechanical concave and convex surface. The body of the cylinder is designed with a circular dense corrugated curved surface structure. The compressive strength bearing capacity is high. After the construction is completed, the product can carry 40T. Trucks pass.
4, Material anti-corrosion, service life of more than 70 years
The product is made of high-strength glass fiber and unsaturated polyester resin. It has no corrosion, acid and alkali resistance, no aging and no deformation. The product body structure adopts a ring-shaped dense corrugated structure, which has high compression resistance, high impact strength and durability, and has a service life of more than 70 years under normal use
conditions.
5, Low cost of products, affordable
The cost of the product is less than 20% of the reinforced concrete septic tank, which is basically the same as the brick septic tank. The environmentally friendly septic tank is inexpensive and affordable to users of all walks of life, and is deeply loved by real estate companies and construction contractors.
6, Patented technology, good water treatment effect
The glass fiber reinforced septic tank is provided with a partition inside, and the water passage hole on the partition plate is displaced up and down to form a swirling flow, which avoids the short circuit and prolongs the actual residence time of the sewage; at the same time, the partition divides the whole tank into a plurality of parts: Including multi-stage biochemical
chamber, clarification chamber, etc., the biochemical interior is equipped with high-efficiency “KWS bio-filler”, and a large number of microorganisms are attached to the filler, so that the contact area and time of sewage and microorganisms are greatly increased. Improve the reaction efficiency, remove the solid and liquid organic matter in the septic tank, reduce the sludge, harmless, and treat the effluent to the third, second, first or middle water reuse standard that meets the national emission standards. standard.
7, No leakage, no pollution, truly environmental protection
The product is integrated and integrated, without joints, no leakage, no pollution, and completely solves the problem of polluting groundwater source after cracks in traditional brick septic tanks. The use of biotechnology to treat sewage has strengthened the function of anaerobic degradation of organic sewage in the septic tank, which greatly prolonged the cleaning time and improved economic, social and environmental benefits.
Specification of FRP winding septic tank
Vol(m3) | 3 | 5 | 7 | 10 | 13 | 15 | 20 | 25 | 30 |
DN(mm) | 1500 | 1800 | 1800 | 1800 | 2200 | 2000 | 2000 | 2000 | 2200 |
L(mm) | 1600 | 1900 | 2700 | 4000 | 4400 | 4750 | 6250 | 7900 | 7900 |
Application of FRP winding septic tank
• Homehouse
• Townhouse
• Aquaculture, Fish Farming Filtration System
• Centralized Filtration System
• Environmental Water Treatment
• Industrial Water Treatment
• Townhouse
• Aquaculture, Fish Farming Filtration System
• Centralized Filtration System
• Environmental Water Treatment
• Industrial Water Treatment
Company Profile
Hengshui Aoliande Trade Co., Ltd. is professional company which to market & sell FRP Pipe, FRP storage tank, FRP molded products, FRP pultrused products and FRP production machines, through the continuous development and introduction of professionality and technology, the company rely on advanced technology, exquisite craftsmanship, reliable quality and perfect service, passed ISO9001, ISO14001, OHSAS18001 management system certification, now we have 50+ staff, annual sales of glass fiber reinforced plastic series products achieved 5,000,000 USD, products have been sold to all over the world, USA, Brazil, Japan, Germany, India, Malaysia, Egypt etc, and won the support and trust from new & old customers.
Major products:
FRP vessel and chemical equipment in sets;
FRP high, medium & low pressure pipe
FRP septic tank
FRP molded & pultrused products
Electrolytic cell
S/F, F/F oli storage tank
Whole set of FRP prodcution machines
Hengshui Aoliande Trade Co., Ltd. not only have ability to sell & supply products, but also has design ability of material, structure and products, our company can provide customers with technical advice, supply of goods and material, transportation, installation supervision etc service.
Main application:
Urban water supply and drainage
Desalination of sea water
Chemical industry
Metallurygy
Brewing
Electric power
Oil storing
Sewage treatment
Building
Municipal works
Highway facilities
Our services
Presale Service
1) Personalized service
Sizes can be customized according to customer request.
2) Professional sales and technical team to provide a complete solution that includes construction suggestions.
3) High quality and on time delivery by our skilled worker, muture technology and large factory capacity.
After Sales Service
1) Warranty period: 5 years based on our good
2) Video, online support in the installation.
3) Professional logistics department so that the products arrive on time to the customer and even to the door.
4) If the customer does not satisfy, we can accept the return or exchange of the product.
1) Personalized service
Sizes can be customized according to customer request.
2) Professional sales and technical team to provide a complete solution that includes construction suggestions.
3) High quality and on time delivery by our skilled worker, muture technology and large factory capacity.
After Sales Service
1) Warranty period: 5 years based on our good
2) Video, online support in the installation.
3) Professional logistics department so that the products arrive on time to the customer and even to the door.
4) If the customer does not satisfy, we can accept the return or exchange of the product.
Certificacion
FAQ
Q: Are you a commercial company or manufacturer?
A: We are a company with commercial company and factory together. Our trading company is called Hengshui Aoliande Trading Co., Ltd
and the factory is called Hengshui Jiubo Composites Co., Ltd.
Q: I didn't see the dimension information or find the size I need, can you do it according to my requirements?
A: For FRP products, all dimensions can be customized. We can do it at the customer's request.
Q: How long is the delivery time?
A: Generally it is 5-10 days if the goods are in stock. Or it is 15-20 days if the products are not in stock, it is according to
the quantity.
Q: Do you provide samples? Is it free or extra?
A: Yes, we could offer the sample for free, but not pay the freight cost.
Q: What are your payment terms?
A: Payment <= 1000USD, 100% in advance. Payment> = 1000USD, 30% T / T in advance, balance before shipment.
If you have another question, please send us your question directly.
A: We are a company with commercial company and factory together. Our trading company is called Hengshui Aoliande Trading Co., Ltd
and the factory is called Hengshui Jiubo Composites Co., Ltd.
Q: I didn't see the dimension information or find the size I need, can you do it according to my requirements?
A: For FRP products, all dimensions can be customized. We can do it at the customer's request.
Q: How long is the delivery time?
A: Generally it is 5-10 days if the goods are in stock. Or it is 15-20 days if the products are not in stock, it is according to
the quantity.
Q: Do you provide samples? Is it free or extra?
A: Yes, we could offer the sample for free, but not pay the freight cost.
Q: What are your payment terms?
A: Payment <= 1000USD, 100% in advance. Payment> = 1000USD, 30% T / T in advance, balance before shipment.
If you have another question, please send us your question directly.
Contact Us
- Hengshui Aoliande Trading Co., Ltd.
Product Categories
Drainage ditch | Electrolytic cell | FRP cooling tower | FRP grating |
FRP PIPE | FRP pultruded profiles | FRP storage tank | FRP tower equipment |
Machine | Septic tank | SMC | Ungrouped |
Water tank |
New Products
- 200 gallon 500 gallon 1000 gallon 2000 gallon FRP GRP Fiberglass Sewer Tank SMC Molded Bio Septic Tank SMC Septic Tank
- Underground Biodigester for Waste Water Treatment FRP Septic Tank Mini biogas digester mini sewerage digester
- 200 gallon 500 gallon 1000 gallon 2000 gallon Fiberglass Sewerage Treatment Tank SMC Septic Tank Manufacturer
- Fiber Reinforced Septic Tank for Sale Factory Supply FRP GRP Chemical Storage Tanks Water Treatment
- Good Price FRP GRP SMC Molded Septic Tank
- High Quality and Corrosion Resistance FRP GRP SMC Molded Septic Tank
- FRP Septic Tank Mini biogas digester mini sewerage digester Domestic Sewage waste water Frp GRP Biological Septic Tank
- Fiberglass Portable Toilet Septic Tank Sewerage Drains Tank Biogas septic tank digester 1000 1500 2000 2500 3000 liter
- Mini biogas digester mini sewerage digester machine Home biogas digester septic tank
- Fiberglass septic system water tank GRP SMC water tank price Fiber Septic Water Tank
- Underground Biodigester for Waste Water Treatment GRP Septic Tank for Toilet Drain System FRP SMC Septic Tank Price
- GRP FRP Fiber Reinforced Plastic Septic Tank For Sewage Treatment
- Factory Direct Sales FRP GRP Fiberglass Septic Tank for Water Waste
- Environmentally Friendly FRP GRP SMC Septic Tank to Treat Waste Water
- Underground plastic septic tank domestic sewage treatment tank sewage purification plant
- Small FRP GRP SMC Fiberglas Septic Tank for Sewage Treatment
- Fiberglass FRP GRP SMC Mould Septic Tank for Protect Environment
- Factory FRP Fiberglass Septic Tank for Waste Water Treatment
- Non-Toxic and Smooth Surface FRP FRP SMC Molded Septic Tank
- Domestic Sewage Water Treatment Plant or Septic Tank
- Cheap Underground FRP GRP Septic Pressure Tank
- Stable Performance Underground FRP/GRP Septic Tank
- Glassfiber Reinforced Plastic Sectional FRP GRP SMC Septic Tank
- FRP Septic Filter Tank GRP Clarification Tank with Filters Small Household Sewage Treatment Tank with Filters
Popular Searches
- water treatment
- water purifier
- water filter
- water purification
- manganese water filter
- groundwater treatment
- water tank
- Water Treatment System
- drinking system
- Wastewater Treatment Equipment
- Industrial Equipment
- waste water treatment
- water filter system
- Sewage Treatment Equipment
- Water Treatment Equipment
- electric system
Find Similar Products By Category
- Environment > Water Treatment
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- Services
- Latest Sourcing Requests
- Product Update
- Companies of Today
- GoldSupplier.com Mobile Site
- B2B Articles
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Contact supplier for lowest price
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-