Contact Platform Support
Help CenterInternal Combustion Engine Oil Of Oxidation Stability Tester IC Interal Combustion Engine ICE Analyzer
Related Products
-
IP278 Seal Adaptability of Petroleum Products Tester Lubricant Seal Compatibility AnalyzerNegotiableMOQ: 1 Set -
ASTM D1263 Leakage Tendencies of Greases Tester Lubricant Grease Seepage Loss Analyzer UARL InstrumentNegotiableMOQ: 1 Set
-
Compatibility of Lubricating Grease and Synthetic Rubber Tester Grease and Robber Consistency Analyzer ASTM D4289NegotiableMOQ: 1 Set
-
Corrosion of Lubricating Oil Tester Lubricant Causticity Instrument Anticorrosion AnalyzerNegotiableMOQ: 1 Set
-
ASTMD6184 Oil Separation From Lubricating Grease of Steel Mesh Tester Grease Separator Oil Distributor InstrumentNegotiableMOQ: 1 Set
Internal Combustion Engine Oil Of Oxidation Stability Tester
Product Model: JF0299
Instrument introduction
This instrument is suitable for testing the oxidation stability of internal combustion engine oil. During the test, the sample is oxidized under specified conditions, and the mass change of the metal flakes in the sample before and after the oxidation, the change of kinematic viscosity at 50°C, the pentane insoluble matter after oxidation and the acidity and alkalinity of the sample vapor are used to score the total score. Indicates the oxidation stability of the sample. The lower the total score, the better the oxidation stability.
Product parameter
1. Applicable standard: SH/T0299
2. Temperature control method: imported PID digital display thermostat
3. Temperature control degree: normal temperature~165±0.1℃
4. Heating method: metal bath heating
5. Power of the whole machine: 1.5KW
6. Working unit: 3 tubes
7. Flow control: * dense flowmeter
8. Power supply: AC220V/50Hz
9. Timing method: digital display timer
Features
1. The instrument is a desktop, including a flow meter for heating bath. There is a hole in the stainless steel lid, which can be put into the sample bottle;
2. Stainless steel structure with ceramic coating;
3. Environment-friendly metal bath heating, reducing the harm of oil fume to the human body, and efficient thermal insulation effect;
4. Stainless steel heater;
5. Flow meter with needle valve, flow rate 0~200mll/min;
6. Air filter with glass wool;
7. Micro-processing thermostat and PID control, digital display temperature, maximum 0.1℃, Pt100 RTD temperature probe;
8. Operating temperature range: room temperature~200°C; safety measures to prevent overheating or low liquid level;
Send Inquiry to This Supplier
You May Also Like
-
ASTM D4289 Compatibility of Synthetic Rubber and Grease Tester NEOPRENE Consistency AnalyzerNegotiableMOQ: 1 Set
-
ASTM D4310 Sludging and Corrosion Tendencies of Inhibited Mineral Oils Tester Lubricant Sludge Tendency AnalyzerNegotiableMOQ: 1 Set
-
DIN 51805 Flow Pressure of Lubricating Greases Tester Grease Streaming Pressure AnalyzerNegotiableMOQ: 1 Set
-
ISO11171 ISO4406 Automatic Cleanliness of Oil Tester Lubricant Turbidity Test AnalyzerNegotiableMOQ: 1 Set
-
DIN51352 Ageing Characteristics Of Lubricating Oils Tester Lubricant Alterungseigenschaft Deteriorative Characteristics AnalyzerNegotiableMOQ: 1 Set
-
DIN51568 Ability to Flow of Lubricating Oils Tester Lubricant Liquidity Analyzer Petroleum Mobility EquipmentNegotiableMOQ: 1 Set
-
ASTM D665 ISO7120 Rust-Preventing Characteristics in the Presence of Water Tester Lubricant Rust Protection AnalyzerNegotiableMOQ: 1 Set
-
ASTM D3829 D4684 Full Automatic Borderline Pumping Temperature of Engine Oil Tester MRV Transportation Through Pump AnalyzerNegotiableMOQ: 1 Set
-
Petroleum Products Colorimeter Lubricant Tintometer Chromoscope AnalyzerNegotiableMOQ: 1 Set
-
ASTM D2711 Demulsibility Characteristics of Lubricating Oils Tester Lubricant Emulsion Resistance AnalyzerNegotiableMOQ: 1 Set
