Contact Platform Support
Help CenterCorrosion of Lubricating Oil Tester Lubricant Causticity Instrument Anticorrosion Analyzer
Related Products
-
ASTMD6184 Oil Separation From Lubricating Grease of Steel Mesh Tester Grease Separator Oil Distributor InstrumentNegotiableMOQ: 1 Set -
ASTM D4289 Compatibility of Synthetic Rubber and Grease Tester NEOPRENE Consistency AnalyzerNegotiableMOQ: 1 Set
-
ASTM D4310 Sludging and Corrosion Tendencies of Inhibited Mineral Oils Tester Lubricant Sludge Tendency AnalyzerNegotiableMOQ: 1 Set
-
DIN 51805 Flow Pressure of Lubricating Greases Tester Grease Streaming Pressure AnalyzerNegotiableMOQ: 1 Set
-
ISO11171 ISO4406 Automatic Cleanliness of Oil Tester Lubricant Turbidity Test AnalyzerNegotiableMOQ: 1 Set
Corrosion of lubricating Oil Tester
Product Model: JF391
Product Introduction
This instrument is suitable for determining the degree of corrosion of engine lubricating oil. The principle is that only the test piece is in contact with the sample, and the corrosion degree of the sample is determined according to the weight change of the metal test piece after a test at a certain temperature for 50 hours.
Technical Parameter
1. Applicable standard: GB/T391
2. Heating method: electric heating tube heating
3. Temperature control: ±0.1℃
4. Stirring method: mechanical stirring
5. Temperature control method: digital display PID thermostat
6. Temperature control range: normal temperature～140℃
7. Timing method: digital display timing
8. Power supply: AC220V/50HZ
Main Feature
1. Two standard lead sheets 20×45×1.5mm;
2. Digital display of microcomputer temperature controller, 0.1℃, PT100 sensor;
3. Two standard glass test tubes 270×30mm;
4. Microcomputer timer, digital display, with wind chime to remind;
5. The oil bath is heated, and the liquid level is protected against over-temperature;
6. The mechanical stirring device reduces the error of manual intervention;
7. Stainless steel heater, stainless steel bath body;
Send Inquiry to This Supplier
You May Also Like
-
DIN51352 Ageing Characteristics Of Lubricating Oils Tester Lubricant Alterungseigenschaft Deteriorative Characteristics AnalyzerNegotiableMOQ: 1 Set
-
DIN51568 Ability to Flow of Lubricating Oils Tester Lubricant Liquidity Analyzer Petroleum Mobility EquipmentNegotiableMOQ: 1 Set
-
ASTM D665 ISO7120 Rust-Preventing Characteristics in the Presence of Water Tester Lubricant Rust Protection AnalyzerNegotiableMOQ: 1 Set
-
ASTM D3829 D4684 Full Automatic Borderline Pumping Temperature of Engine Oil Tester MRV Transportation Through Pump AnalyzerNegotiableMOQ: 1 Set
-
Petroleum Products Colorimeter Lubricant Tintometer Chromoscope AnalyzerNegotiableMOQ: 1 Set
-
ASTM D2711 Demulsibility Characteristics of Lubricating Oils Tester Lubricant Emulsion Resistance AnalyzerNegotiableMOQ: 1 Set
-
ASTM D972 Evaporation Loss of Lubricating Greases and Oils Tester Lubricant Loss on Heating AnalyzerNegotiableMOQ: 1 Set
-
ASTM D2602 D5293 Automatic Apparent Viscosity of Engine Oils Tester Low Temperature Dynamic Viscosity TesterNegotiableMOQ: 1 Set
-
ASTM D566 ISO2176 NFT60102 Dropping Point of Lubricating Grease Tester Lubricant Melting Point AnalyzerNegotiableMOQ: 1 Set
-
ASTM D92 Fully Automatic Open Flash And Fire Points Tester Open Cup Flash Point and Ignition Point AnalyzerNegotiableMOQ: 1 Set
