Contact Platform Support
Help CenterCompatibility of Lubricating Grease and Synthetic Rubber Tester Grease and Robber Consistency Analyzer ASTM D4289
Related Products
-
Corrosion of Lubricating Oil Tester Lubricant Causticity Instrument Anticorrosion AnalyzerNegotiableMOQ: 1 Set -
ASTMD6184 Oil Separation From Lubricating Grease of Steel Mesh Tester Grease Separator Oil Distributor InstrumentNegotiableMOQ: 1 Set
-
ASTM D4289 Compatibility of Synthetic Rubber and Grease Tester NEOPRENE Consistency AnalyzerNegotiableMOQ: 1 Set
-
ASTM D4310 Sludging and Corrosion Tendencies of Inhibited Mineral Oils Tester Lubricant Sludge Tendency AnalyzerNegotiableMOQ: 1 Set
-
DIN 51805 Flow Pressure of Lubricating Greases Tester Grease Streaming Pressure AnalyzerNegotiableMOQ: 1 Set
Compatibility of Lubricating Grease and Synthetic Rubber Tester
ASTM D4289
Product Model: JF0429
Product Introduction
This instrument is suitable for determining the compatibility of lubricating grease with standard synthetic rubber. Place a standard synthetic rubber test piece with a specified size in a grease sample at a certain temperature, and use its volume change and hardness change to evaluate the compatibility of the grease with the standard synthetic rubber after a 70-hour test.
Technical Parameter
1. Applicable standard: ASTM D4289 SH/T0429
2. Timing method: digital display timer
3. Temperature control method: digital display PID thermostat
4. Heating power: 500W
5. Temperature control range: normal temperature～150℃
6. Temperature control: ±1℃
7. Power supply: AC220V/50HZ
Performance Characteristics
1. Standard chloroprene rubber and nitrile rubber test piece: 50×25×2mm;
2. Stainless steel heating box with a dry electric heater inside;
3. Microcomputer temperature controller, digital display, ±1℃ PT100 sensor;
4. The heating box has a transparent observation window for easy operation;
5. Digital display timer, record test time, with time phoenix buzzer;
6. Two tests can be done at the same time;
7. There is a hole for inserting a thermometer on the top of the heating box;
8. The surface of the instrument is treated with electrostatic spraying to prevent corrosion and easy to clean;
Send Inquiry to This Supplier
You May Also Like
-
ISO11171 ISO4406 Automatic Cleanliness of Oil Tester Lubricant Turbidity Test AnalyzerNegotiableMOQ: 1 Set
-
DIN51352 Ageing Characteristics Of Lubricating Oils Tester Lubricant Alterungseigenschaft Deteriorative Characteristics AnalyzerNegotiableMOQ: 1 Set
-
DIN51568 Ability to Flow of Lubricating Oils Tester Lubricant Liquidity Analyzer Petroleum Mobility EquipmentNegotiableMOQ: 1 Set
-
ASTM D665 ISO7120 Rust-Preventing Characteristics in the Presence of Water Tester Lubricant Rust Protection AnalyzerNegotiableMOQ: 1 Set
-
ASTM D3829 D4684 Full Automatic Borderline Pumping Temperature of Engine Oil Tester MRV Transportation Through Pump AnalyzerNegotiableMOQ: 1 Set
-
Petroleum Products Colorimeter Lubricant Tintometer Chromoscope AnalyzerNegotiableMOQ: 1 Set
-
ASTM D2711 Demulsibility Characteristics of Lubricating Oils Tester Lubricant Emulsion Resistance AnalyzerNegotiableMOQ: 1 Set
-
ASTM D972 Evaporation Loss of Lubricating Greases and Oils Tester Lubricant Loss on Heating AnalyzerNegotiableMOQ: 1 Set
-
ASTM D2602 D5293 Automatic Apparent Viscosity of Engine Oils Tester Low Temperature Dynamic Viscosity TesterNegotiableMOQ: 1 Set
-
ASTM D566 ISO2176 NFT60102 Dropping Point of Lubricating Grease Tester Lubricant Melting Point AnalyzerNegotiableMOQ: 1 Set
