Home > Products > PCT/HAST High pressure aging chamber > Dongguan factory production highly Accelerated Environmental Stress Screening Chambers
Dongguan factory production highly Accelerated Environmental Stress Screening Chambers
- 1000 per Month
- T/T Credit Card
- 2021 High Accelerated Stress Test Chamber Simulation Climate Test Chamber
- Pressure Accelerated Temperature And Humidity Environmental Stress Screening Chamber
- Laboratory Pressure Testing Equipment PCT Aging Test Chamber High Pressure Stress Test
- Dongguan PCT Accelerated Aging Testing chamber
- PCT Pressure Testing Accelerated Environmental Test Chambers Temperature And Humidity Chamber
- PCT High-Low Temperature Accelerated Aging Test Chamber
Product Description
Equipment overview:
The equipment is mainly composed of a box, a heating system, an air circulation system and a control system. The outer casing of the cabinet is made of cold-rolled steel plate with electrostatic spray or matte stainless steel, and the inner casing is made of high-quality mirror stainless steel. The overall appearance is beautiful and generous. The insulation layer is made of rigid polyurethane foam with a small amount of ultra-fine glass wool, which has the characteristics of high strength and good heat preservation.
Application industry:
Suitable for the quality of electronic products, plastic products, electrical appliances, instruments, food, vehicles, metals, chemicals, building materials, aerospace, medical ... and other products.
The main function:
PCT test is generally called pressure cooker cooking test or saturated steam test. The most important thing is to test the test object under severe temperature, humidity (100% RH) [saturated water vapor] and pressure environment. High humidity capability, for printed circuit boards & FPC), for material moisture absorption test, high pressure cooking test, etc. For test purposes, if the test object is a semiconductor, to test the moisture resistance of the semiconductor package, the test object is Placed under severe temperature and humidity and pressure environment test, if the semi-package is not good, moisture will penetrate into the package along the interface of colloid or colloid and lead frame. Common causes of disassembly: explosion effect, dynamic metallization Corrosion caused by regional corrosion, short circuit caused by contamination between package pins, etc.
main feature:
1. The imported double-temperature structure with high temperature resistant solenoid valve is used to minimize the failure rate.
2. Independent steam generation chamber to avoid direct impact of steam on the product, so as not to cause partial damage to the product.
3. The door lock labor-saving structure solves the shortcomings of the locking difficulty of the first-generation product disc handle.
4. Cool air before the test; the design of the exhaust air in the test (air discharge in the test barrel) improves the pressure stability and reproducibility.
5. Ultra-long-term experimental running time, long-term experimental machine running 1000 hours.
6. Water level protection, through the test room water level Sensor to detect protection.
7.tank pressure-resistant design, the box body pressure (140 ° C) 2.65kg, in line with the water pressure test 6kg.
8. Two-stage pressure safety protection device, adopting two-stage combined controller and mechanical pressure protection device.
9.Safety protection button, emergency safety device, two-stage automatic pressure button
10. Support USB export data, history record test data of three months duration.
Meet the standards:
CNS, ISO, JIS, ASTM, DIN, BS, IEC, NACE, UL, MIL...
Structure and materials
a. Round inner box, stainless steel round test inner box structure, in line with industrial safety container standards, can prevent dew condensation in test
meter.
b. Round lining, stainless steel circular lining design, can avoid the direct impact of vapor latent heat on the test sample. c. Precision design, good air tightness, low water consumption, can be continuously operated for 400Hrs every time.
d. The patented packing design makes the door and the box more tightly integrated, which is completely different from the traditional extrusion type and can extend the packing life.
Temperature electric heating circulation system:
1. Heating system spinning: heat-dissipating ring electric heater;
2. Heating tube: It adopts all-stainless steel seamless casing, the insulation resistance is greater than 50MΩ, and it has anti-dry control;
3. Control mode: Balanced temperature control system (BTHC), P.I.D. control SSR solid state relay realizes high-precision non-contact switch control, so that the heating amount of the system is equal to the heat loss, so it can be used stably for a long time.
Product parameters
Model | ||
Studio size | PCT40: 400mm x L500 mm round test chamber | |
Performance | Temperature and humidity range | +100 °C ~ +135 °C (saturated vapor temperature), 100 vapor humidity |
Temperature fluctuation | ±0.5°C | |
Humidity distribution mean | 3% | |
Pressurization time | 0.00 Kg ~ 1.04 Kg / cm2 Approximately 45 points | |
Temperature display accuracy | 0.1 ° C | |
Pressure fluctuation | ±0.02Kg | |
Temperature and humidity operation control system | Controller | Imported LCD digital display P, I, D + S, S, R. Micro PLC + color touch screen |
Range of accuracy | Setting accuracy: temperature ±0.1 °C, indicating accuracy: temperature ± 0.1 ° C, resolution: ± 0.1 ° C | |
Temperature Sensor | Platinum resistance PT100Ω | |
Heating system | Fully independent system, nickel-chromium alloy electric heating heater | |
Circulatory system | Steam convection hot row | |
Material used | Outer box material | High quality carbon steel plate. Phosphating electrostatic spray treatment / SUS304 stainless steel matte line hairline treatment |
Inner box material | SUS304 stainless steel high quality mirror light panel | |
Insulation material | Polyurethane rigid foam, ultra-fine glass fiber cotton | |
Standard configuration | 1 sample rack, 3 layers of partition | |
safety protection | Overvoltage, short circuit, over temperature, over current protection | |
voltage | AC220V/ 50±0.5Hz single phase | |
Note: |
Conditions of Use:
1. Installation site
The ground is flat and well ventilated. There is no strong vibration around the equipment. There is no strong electromagnetic field around the equipment. There is no flammable, explosive, corrosive substances and dust around the equipment. There is proper use and maintenance space around the equipment, as shown in the figure below.
1. External temperature: 27°C±3°C Relative humidity: ≤85 Air pressure: 86kPa~106kPa
2, there must be a certain space around the equipment for easy maintenance, as shown on the right A: not less than 10cm B: not less than 60cm C: not less than 60cm
It is required to configure the equipment with the corresponding capacity of air or power switch at the installation site, and this switch must be used independently for this equipment.
Requirements for the storage environment
1. When the equipment is not working, the temperature of the environment should be kept within 5 °C ~ +30 °C
2. When the ambient temperature is lower than 0 °C, the water remaining in the equipment should be drained to prevent the water in the pipeline from freezing and rising (only water-cooled)
Q: Are your company a trading one or a factory?
A: We are a factory over13-year experience.
Q: After an order is placed, when to deliver?
A: Generally about 15 days. If we have inventory, we can arrange to ship within 3-5 days. Please be aware that our production lead times depend on specific items and item quantities.
Q: What about the product' services and quality?
A: We have Pre-service, middle-service and after-sale service. Can provide video training to show you how to install & operate. We can also arrange engineer to train the operation of equipment to customer's company when you need. Core components almostly are from the import.
Q: Our controller is self-developed, which is convenient to provide non-standard customization quickly
Contact Us
- Dongguan Hongjin Test Instrument Co., Ltd.
- PCT High-Low Temperature Test Chamber With Pressure
- High Pressure Environmental Price Testing Accelerated Aging Test Chamber
- Highly Accelerated Pressure Aging Test Machine PCT Test Chamber For IC Semiconductors
- Highly Accelerated Stress Climatic Environmental Price Air Chamber Testing
- highly Accelerated Stress life Testing / testing environmental test chamber
- High precision high accelerates pressure stress test equipment for sale
- Lab Photovoltaic Climatic PCT High Pressure Accelerated Aging Test Machine
- High Accelerated Stress Test Chamber Simulation Climate Test Chamber Lab Equipment For School
- Unsaturated Humidity HAST-Highly Accelerated Stress Test Chambers For Ic Semiconductors
- pct high pressure accelerated aging testing chamber price
- accelerated stress test chambers/HALT & HASS Chamber shelf hast steam aging chamber
- Accelerated tester/accelerated aging test hast 50l pressure cooker
- 300 bar industrial temperature test and high pressure chambers device for hyperbaric chambers
- Accelerated temperature test and high pressure chambers device for hyperbaric chambers
- Semiconductor Chip Climatic HAST Unsaturated High Pressure Accelerated Aging Tester
- lab testing machine \\/ pct cooker high quality temperature and recorder hast pressure aging test chamber
- Lab Photovoltaic Climatic PCT High Pressure Accelerated Aging Test Machine
- Hast Chamber / Accelerated Pressure Aging Test Machine
- Temperature And Pressure Chamber
- ISO 7165 Computer Controlled Shaker Table Fire Extinguisher Vibration Testing Machine Dinamics
- Lithium battery pneumatic impact testing machine customization
- IEC 62619 dynamic shaker electromagnetic high-frequency vibration tester made in China
- Electro-dynamic displacement air cooling sine and random sine vibration shaker systems
- Economy electromagnetic triaxial sine vibration shock testing system for battery
Popular Searches
Recommended Products
- Paper and Board Thickness Tester thickness gauge
- Cheap Texture Analyzer for Meat Analysis
- Gel Strength Tester
- Stylus Pen Sliding and COF Tester Slid Testing Machine for Pen
- Melt Flow Rate Tester for Plastic
- Charpy and Izod Impact Tester
- Tape Shear Adhesion Tester
- Loop Tack Tester
- High Speed Unwinding Force Tester for Tape
- Ball Tack Tester
- Vibration Testing Machine For Package Box
- ASTM D4577 Top Load Tester For Pharmaceutical Packaging Compression Strength Measurement Equipment
Find Similar Products By Category
- Measurement & Analysis Instruments > Testing Equipment
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
*Email
Please input the mailbox.
-
Mobile