Contact Platform Support
Help CenterPanasonic Radial Automatic Insertion Machine RL131
Related Products
-
Panasonic Radial Auto Intersion Machine RHS2BNegotiableMOQ: 1 Unit -
Panasonic Radial Lead Component Insertion RG131NegotiableMOQ: 1 Unit
-
High-speed Axial Component Inserter Machine AVK2BNegotiableMOQ: 1 Unit
-
Axial AV131 Panasonic InsertionNegotiableMOQ: 1 Unit
-
PCB DEK Printing Clamping System of the StencilNegotiableMOQ: 1 Set
Specification:
PCB size (mm) L 50 × W 50 〜 L 508 × W 381
Plug-in speed*1 0.25 s/point ~ 0.6 s/point
Number of components installed 40 80 (in connection mode), 40 + 40 (in exchange mode)
Object component pitch 2.5 mm, 5.0 mm, 7.5 mm, 10.0 mm
Product Overview: Panasonic RL131 radial lead component machine,
Substrate size (mm) L 50 × W 50 〜 L 508 × W 381,
Plug-in speed*1 0.25 s/point ~ 0.6 s/point,
The number of components mounted 40 80 (in connection mode), 40 + 40 (in exchange mode, the distance between target components is 2.5 mm, 5.0 mm, 7.5 mm, 10.0 mm
Features:
High speed and high efficiency
V-shaped cutting feet can increase the insertion speed
Plug-in*** 2.5/5.0mm automatic change, optional 7.5/10.0mm
Use a guide pin to introduce and increase the speed of insertion
A large number of stations, up to 80 different components or 32 large components
80 stations have dual feed stations, with material preparation mode and switch mode
Automatic feeding
Both the front and back touch screens of the machine can operate the equipment, which is easy to use
With two PCBs, effectively reduce the transmission time
Built-in multilingual word operating system
High productivity
1 Use the component supply sequence method to increase the operating rate.
In addition to the maximum insertion speed of 0.17 seconds/point, since the component supply unit is fixed, only the movement distance of the XY table needs to be considered.
.NC data can reduce speed loss and realize high-speed insertion of radial parts.
.Parts can also be replaced during operation, which can reduce the loss of equipment when parts are provided.
2 The division of component supply unit 2 can realize multiple operation modes.
.In the operation mode, use four devices to work in the exchange mode as the operation mode, avoiding electronic components.
. Improve productivity by reducing the situation and reducing the loss of electronic components.
High-speed insertion and high reliability
1High reliability of high-speed inserts and radial components
.0.17 s/point high-speed plug-in is realized by the electronic component lead chuck mode and the up and down AC servo of the push rod.
.It has the function of correcting the bending of the lead wires of electronic components, and the lead wire V-cut realizes stable insertion.
2 Simple preparation, no need to stop.
.By modifying the tape unit of the electronic components, the racks of 2.5mm and 5.0mm can be shared.
.Main shaft AC servo motorization, easy maintenance.
Send Inquiry to This Supplier
You May Also Like
-
NPM CM602 CM402 CPK Glass Calibration Jig ToolNegotiableMOQ: 1 Unit
-
NPM-D3 NOZZLE HOLDER PartsNegotiableMOQ: 1 Piece
-
NPM Pump Repair Kit KHB-200 KHA-200NegotiableMOQ: 1 Set
-
SMT Pick and Place Machine Nozzle Cleaning Machine Cleaner for All SMT Nozzle-Panasonic-Yamaha- I-pulse-FUJI NXT and CP-Samsung-JUKI-Hitachi NozzlesNegotiableMOQ: 1 Unit
-
Surface Mounting Machine NPM-W2NegotiableMOQ: 1 Unit
-
Yamaha Label Feeder YS24 YS12 YSM10 YSM20 Feeder Placement Mounting FS-LB-YS12-50-V03NegotiableMOQ: 1 Piece
-
Panasonic Multifunctional Transfer Unit N610095856AB POP Feeder for CSP Flux GelNegotiableMOQ: 1 Piece
-
Siemens ASM Label Feeder Siplace X Series Feeder SMT FS-LB-ASM-20NegotiableMOQ: 1 Piece
-
Samsung Label Feeder SM482 SM481 SM421 Placement SME Feeder Tool Smt Feeder FS-LB-SAM-100-Y03NegotiableMOQ: 1 Piece
-
Panasonic Label NPM Feeder CM602-L SMT Feeder FS-LB-NPM-50-V02NegotiableMOQ: 1 Piece
