Contact Platform Support
Help CenterIEC60068-2-75 IK07 to IK10 Pendulum Impact Hammer Test Apparatus
Related Products
-
IK07-IK10 Vertical Impact Hammer Test ApparatusUS$ 3300 - 5000MOQ: 1 Set -
IEC60068-2-75 IK07 IK08 IK09 IK10 Striking ElementsUS$ 1000 - 4000MOQ: 1 Piece
-
IEC60598-1 Impact Test Device With a Steel Ball for Vertical and Pendulum TestingUS$ 2000 - 8000MOQ: 1 Set
-
IEC60068-2-75 Spring Hammer Calibration DeviceUS$ 2000 - 10000MOQ: 1 Set
-
IEC60068-2-75 0.14J Single Spring Impact Hammer for IK01 Level Impact TestingUS$ 200 - 300MOQ: 1 Piece
IK07-IK10 Pendulum Impact Hammer
The IK mechanical impact test apparatus is designed according to IEC60068-2-75 Test Eha and IEC62262 (equivalent EN62262), and can meet the test requirements of IEC60598, EN50102. The IK Code was originally defined in European Standard BS EN 50102:1995 and amended in 1998, following its adoption as an international standard (IEC 62262) in 2002, the European standard was renumbered EN 62262. The IK code is from 00 to 10, and corresponding impact energy is from 0.14J to 20J.
IK pendulum hammer is for IK07 to IK10 testing, the hammer is made by steel, the working principle is : the sample is placed in normal, then adjust the impact points, and position the impact device, then release the hammer to freely striking the specimen. The impact angle and impact height are adjustable.
The test rig is made of aluminum alloy, with four wheels at the bottom, and the whole device can move freely.
Specification
Swing Pipe |
Steel pipe (Length: 1000mm, outer diameter: 15.9mm, thickness: 1.5mm), equip with striking elements to equal to equivalent mass |
Impact angle |
0~900 |
Lifting stroke |
200-1200mm |
Impact hammers |
0.5kg, 1.7kg, 5kg, 5kg steel hammers for IK07 to IK10 Pendulum impact |
Impact energy: |
2J, 5J, 10J, 20J |
Note:
The standard configuration includes 0.5kg, 1.7kg and 5kg hammers for IK 07 to IK10 testing, 10KG hammer for 50J test is a optional device.
Characteristics 0f Striking Elements | ||||||
Energy/J |
≤1 ±10% |
2 ±5% |
5 ±5% |
10 ±5% |
20 ±5% |
50 ±5% |
Equivalent mass±2%kg |
0.25(0.2) |
0.5 |
1.7 |
5 |
5 |
10 |
Material |
Nylon |
steel |
||||
R/mm |
10 |
25 |
25 |
50 |
50 |
50 |
D/mm |
18.5（20） |
35 |
60 |
80 |
100 |
125 |
f/mm |
6.2（10） |
7 |
10 |
20 |
20 |
25 |
r/mm |
- |
- |
6 |
- |
10 |
17 |
l/mm |
Depends |
|||||
Fall Height | |||||||||||||||
Energy/J |
0.14 |
0.2 |
(0.3) |
0.35 |
(0.4) |
0.5 |
0.7 |
1 |
2 |
5 |
10 |
20 |
50 |
||
Equivalent mass/kg |
0.25 |
(0.2) |
0.25 |
(0.2) |
0.25 |
(0.2) |
(0.2) |
0.25 |
0.25 |
0 .25 |
0.5 |
1.7 |
5 |
5 |
10 |
Fall height±1%mm |
56 |
(100) |
80 |
(150) |
140 |
(200) |
(250) |
200 |
280 |
400 |
400 |
300 |
200 |
400 |
500 |
Degrees of protection against external mechanical impacts
IK01 |
IK02 |
IK03 |
IK04 |
IK05 |
IK06 |
IK07 |
IK08 |
IK09 |
IK10 |
0.14J |
0.2J |
0.35J |
0.5J |
0.7J |
1J |
2J |
5J |
10J |
20J |
Send Inquiry to This Supplier
You May Also Like
-
Drop Impact Test Hardwood SurfaceUS$ 200 - 1000MOQ: 1 Piece
-
Digital Charpy Impact Strength Tester Meet Requirements of ISO179-2000US$ 1000 - 20000MOQ: 1 Set
-
ISO180-2000 Digital Izod Impact Strength Tester With 3.5m/s Impact SpeedUS$ 1000 - 20000MOQ: 1 Set
-
IEC60068-2-75 Calibration Device for Spring Hammer Calibration DeviceUS$ 3000 - 20000MOQ: 1 Set
-
IEC60068-2-75 IK02 Spring Hammer for 0.2J Impact TestingUS$ 200 - 300MOQ: 1 Piece
-
IEC60068-2-75 IK01 to IK06 Impact Testing Machine Spring Impact HammerUS$ 200 - 4000MOQ: 1 Piece
-
IEC60068-2-75 IK07-IK10 Pendulum Impact Hammer Test ApparatusUS$ 3300 - 5000MOQ: 1 Set
-
IEC60068-2-75 IK07 Spring Impact Hammer for 2J Impact TestingUS$ 200 - 4000MOQ: 1 Piece
-
IEC60068-2-75 IK07 to IK10 Manual Release Vertical Impact HammersUS$ 1000 - 4000MOQ: 1 Piece
-
IEC61000-4-12 Ring Wave GeneratorUS$ 2900 - 7000MOQ: 1 Set
