Contact Platform Support
Help CenterTKYM Insulator Salt Density Tester
Related Products
-
TKDJ-1 Single-phase Electric Energy Meter Field Calibrator (combined Clamp Meter)NegotiableMOQ: 1 Piece -
TKCZ-II Cable Safety Piercer (double GunNegotiableMOQ: 1 Piece
-
TKHL-SC Handheld Loop Resistance TesterNegotiableMOQ: 1 Piece
-
TKCZ-II Isolating Switch Contact Finger Pressure TesterNegotiableMOQ: 1 Piece
-
3 Phase Relay Test EquipmentNegotiableMOQ: 1 Piece
TKYM insulator salt density tester is also called insulator salt density tester, insulator salt conductivity tester, salt density detector, equivalent salt density tester, and direct-reading equivalent salt density tester.
Yuanzi Salt Density Tester is specially designed for testing the equivalent salt density of insulators. The insulator salt density tester system has a built-in insulator equivalent salt density calculation formula, and the reading is intuitive.
TKYM insulator salt density tester is also called salt density direct-reading salt density tester equivalent insulator salt density tester, which is specially designed for testing the equivalent salt density of insulators. The salt density tester system
Built-in insulator equivalent salt density calculation formula, the reading is intuitive. Using the rotating mouse, the operation is simple. This salt density tester comes with a miniature printer, which is convenient for data retention and comparison. Large screen LCD display
All parameters and results are clear at a glance. The salt density tester has a built-in large-capacity lithium battery, which is convenient for field testing.
The insulator salt density tester and salt density tester comply with the requirements and requirements of GB/T16434-1996 "High-voltage overhead lines and power plants, substation environmental pollution area classification and external insulation selection standards"
Requirement, the conductivity salt density tester is suitable for the salt density test of external insulation equipment in high-speed overhead lines, power plants, substations and other places.
Insulator Salt Density Tester Parameters —— Parameters
Salt density tester model TKYM
Name of Salt Density Tester Salt Density Tester, Conductivity Salt Density Tester
Measuring range Salt density 0.0001mg/cm2～9.9999mg/cm2 (according to X-4.5 type insulator)
Temperature 0℃～95℃
Resistive current measurement range (peak value) Conductivity 0～100000μs/cm
Measurement accuracy Salt density Resolution 0.0001 digits, full scale accuracy is better than ±2%
Temperature resolution 0.1 bit, accuracy better than ±0.5℃
Conductivity The resolution is 1/1000 of the range, and the full range accuracy is better than ±0.5%
Note: When testing low-concentration solutions, choose an electrode with a small electrode constant K; when testing a high-concentration solution, choose an electrode with a large electrode constant K. For detailed selection, please refer to the accessories section of Section 9
Display output mode A. LCD display measurement results
B. The measurement data can be directly output through the printer
C. Upload to computer via data cable for processing
Operating conditions Ambient temperature 0℃～50℃
Relative humidity ≤80%
Power supply AC220V±10%
Volume and weight Volume 355×250×140mm3
Weight about 2.5kg
Send Inquiry to This Supplier
You May Also Like
-
Secondary Current Injection Test SetNegotiableMOQ: 1 Piece
-
Six Phase Universal Secondary Current InjectionNegotiableMOQ: 1 Piece
-
Single Phase Relay Test SetNegotiableMOQ: 1 Piece
-
Electronic Thermal Relay CalibratorNegotiableMOQ: 1 Piece
-
TKRJElectronic Thermal Relay CalibratorNegotiableMOQ: 1 Piece
-
TKJBSingle Phase Relay Test SetNegotiableMOQ: 1 Piece
-
TKJB-1200 Six Phase Universal Secondary Current Injection Relay TestNegotiableMOQ: 1 Piece
-
TKJB-802 Secondary Current Injection Test Set Three Phase Relay TestNegotiableMOQ: 1 Piece
-
TKJB-702 3 Phase Relay Test EquipmentNegotiableMOQ: 1 Piece
-
TKYX-III Digital Three-phase Phase ShifterNegotiableMOQ: 1 Piece
