Contact Platform Support
Help Center1/4 Inch to 10 Inch One Layer Braided High Pressure Hose
Related Products
-
Fuel Injection Pipe High-pressure Oil Pipe High Pressure Oil Pipe AssyUS$ 1 - 580MOQ: 100 Meters -
1/6 High Pressure Hose Super Long Service Life Industrial Hydraulic High Pressure Flexible Braided Suction Nylon Oil Air Rubber Hose Pipe AssemblyUS$ 1 - 580MOQ: 100 Meters
-
High Pressure Hydraulic Braided Rubber HoseNegotiableMOQ: 100 Meters
-
High Pressure Hose High-pressure Tubing High Pressure Rubber HoseNegotiableMOQ: 100 Meters
-
1/4 a Layer of Steel Wire High Pressure Hose High Pressure Rubber Hose Steel Wire Rubber HoseUS$ 1 - 580MOQ: 100 Meters
A layer of steel wire, rubber hose, high pressure hose points two layers of steel wire, rubber hose, three layers of steel wire, rubber hose, steel wire hose, four layers and six layer steel wire hose, points according to the requirement, and can be divided into hydraulic equipment with high pressure rubber hose, coal mine high pressure rubber hose, high pressure drilling hose, steel high pressure rubber hose, power plant high pressure rubber hose, oil field high pressure rubber hose, environmental protection equipment high pressure rubber hose, high pressure hose that resistance to high temperature and high pressure hose,Acid and alkali resistance high pressure hose, oil resistance high pressure hose, ocean pressure hose, sandblasting high pressure hose, steam high pressure hose, heat conducting oil high pressure hose, different pressure, different quality, different prices.
In geological and petroleum rotary drilling, it is necessary to transport large capacity fluid mud to the drill bit through high pressure. The rotary drilling hose and the hose assembly are used as flexible connectors in the mud conveying pipeline.
The rotary drilling hose is used between the top of the riser and the rotary joint running up and down.Offshore mud transfer hoses are used to transport mud at high pressure between barges and offshore drilling platforms and are usually longer than 13.5m.
Shorter (9m or less) cushioning hoses are used between the pump and the drilling rig, i.e. the riser manifold, to accommodate different shafts and to isolate vibrations.It is composed of an inner adhesive layer, an inner adhesive protective layer, a middle adhesive layer, a wire winding layer and an outer adhesive layer.The hose lining shall be made of oil and water resistant rubber.The hose reinforcement layer shall be made of woven fabric and wire (rope) material.The outer coating of the hose shall be made of rubber which is resistant to oil, wear and weather aging, and the surface shall have a colored band along its length for installation with the hose.
Send Inquiry to This Supplier
You May Also Like
-
1/2 Inch R1at High Pressure Steel Wire Braided Hydraulic Rubber HoseUS$ 1 - 580MOQ: 100 Meters
-
Special Flame Retardant Fire Proof Rubber Hose Asbestos Rubber Hose Water Cooling Cable Hose for Calcium Carbide Factory Chemical FactoryUS$ 1.5 - 20MOQ: 100 Meters
-
Asbestos Rubber Hose High Temperature Resistant Asbestos HoseUS$ 1.5 - 20MOQ: 100 Meters
-
Factory Supply Customized Fluorine Rubber Round FKM Solid Seal StripUS$ 0.5 - 10MOQ: 100 Meters
-
The Manufacturer Produces the Fluorine Rubber Seal Strip Fluorine Rubber StripUS$ 0.5 - 10MOQ: 100 Meters
-
High Pressure Hose Assembly Hose ConnectorNegotiableMOQ: 1 Piece
-
54mm High Pressure Hose Clamps for PipeNegotiableMOQ: 1
-
Ultra High Pressure 1500bar Flexible Lance New Industrial Pipe Cleaning High Pressure Soft HoseUS$ 120.00 - 150.00MOQ: 1 Set
-
High Pressure Hose ClampUS$ 0.2 - 2MOQ: 2000 Pieces
-
High Pressure Hose Reel, Garden Hose, Water HoseUS$ 10 - 30MOQ: 1000 Pieces
