RJ45 Computer Networking Cat5 Cat5e Cat6 Ethernet Patch Cable 100ft
- Product standard:
The production standard for anti-flaming and fire-resistant cables is GB/T19666-2005,GB/T5023-2008,JB/T8734-2012 - Main of cables features
1,Uo/U is 450/750V,300/500,
2,Long-term allowable temperature of the cable:The allowable temperature of 105 Cable should not exceed 105℃, the allowable temperature of other models should not exceed 70℃.
- Application:
Applicable to the cables and wires of rated yolatage 450/750V and less than 450/750V AC for power
plant, householdelectrical applance,insurment and telecommunication equipment.
U/UTP Cat 6(lndoor)
| Anti-Crosstalk Divider | LDPE:4.5*0.3 |
| Cable Shield(Aluminum Foil) | Tick:0.060mm,Extent:25mm |
| ESD Drain Wire | O.5TC |
| Nilon Rip cord | 150D |
| Max.capacitance unbalance(pF/100m) | ≤330pF /100M(Per TIA/EIA-5688.2) |
| ≤60pF/100(Per IEC 61156) | |
| Nominal Velocity of Propagation | 72% |
| Max.Delay Skew(ns/100m) | ≤45ns/100m |
| Max.Conductor DC Resistance 20Deg.C | 9.38Ω/100M (24AWG) |
| Max.DC Resistance unbalance 20 Deg.C | ≤5% (per TIA/EIA-5688.2) |
| ≤2% (per IEC 61156) | |
| Characteristic lmpedance(O) 4~100MHz | 100±15 |
| Operating Temp.Range | -20~70 ℃ |
| Max.Recommended Pulling Tension | 110N |
| Min.Bend Radius(lnstall) | 8XO.D. |
| Flame Test | CM |
F/UTP Cat 6e(lndoor)
| Anti-Crosstalk Divider | LDPE:4.5*0.3 |
| cable Shield(Aluminum Foil) | Tick:0.060mm,Extent:25mm |
| ESD Drain Wire | 0.5TC |
| Ni Ion Rip cord | 150D |
| Max.capacitance unbalance(pF/100m) | ≤330pF/100M(Per TIA/EIA-568B.2) |
| ≤60pF/100{Per IEC 61156} | |
| Nominal Velocity of Propagation | 69% |
| Max.Delay Skew(ns/100m} | ≤45ns/100m |
| Max.Conductor DC Resistance20Deg.c | 9.38Ω/100M (24AWG) |
| Max.DC Resistance unbalance 20 Deg.C | ≤5% (perTIA/EIA-568B.2) |
| ≤2% (per IEC 61156) | |
| Characteristic lmpedance(O) 4"1.00MHz | 100±15 |
| Operating Temp.Range | -20~70℃ |
| Max.Recommended Pulling Tension | 110N |
| Min.Bend Radius(lnstall) | 8xO.D. |
| Flame Test | CM |

Our customers are located all over the world including China, Singapore, Malaysia, Indonesia, Korea, India, USA and many countries in Europe as well as Africa and South America.
1. Are you a manufacturer or trading company?
We are a professional manufacturer. We can control your order from the first begining to the last.
Welcome to visit us. We'll pick you up in Shenzhen.
2. How can I get a sample to test your quality?
The samples are free for you. New clients are expected to pay for the courier cost.
3. What’s your Minimum Order Quantity?
Normally 100m. However, the cable is very heavy.
You'd better order a suitable quantity to avoid the high freight.
Sea transportation is the best option.
4. Can I get a discount?
It depends on your quantity, We can make a discount and afford the freight. Pls kindly contact us.
5. Does your company accept OEM production?
Yes, could print your company name, we even custom the quality card to promote your company.
Send Inquiry to This Supplier
You May Also Like
-
High Quality Single Mode Fiber Optic Patch Cord Jumper CableNegotiableMOQ: 1
-
High Qualiy Black /Red Test Lead Set for MultimeterUS$ 0.2 - 0.9MOQ: 500 Pieces
-
Solid Copper FTP Cat5e LAN Cable/Network CableUS$ 1 - 20MOQ: 10 Boxes
-
Stock Amp Cat6 Patch Cord Amp Cat 6 Patch CordUS$ 0.01 - 10MOQ: 500 Pieces
-
Maunfaucturer Coaxial Pigtail Cable With N Female to Mmcx ConnectorUS$ 0.67 - 1.27MOQ: 100 Pieces
-
Anritsu Original Test Port Cable Armored for S331D S331E S331L Site MasterUS$ 30 - 70MOQ: 1 Piece
-
Digital Print Custom Cycling Clothing Short-sleeved Jersey TightsNegotiableMOQ: 1 Piece
-
Wall Mount Kiosk For Bill PaymentNegotiableMOQ: 1 Set
-
Portable Water-Cooled Aquarium Industrial Water Chiller SystemNegotiableMOQ: 1 Piece
-
High End Consumer Electronic Prototype DIP COB Printed Circuit Board PCB Assembly ServicesNegotiableMOQ: 1 Piece










