China Factory Directly Sale CR800 Common Injector Rail Tester


PQ1000


PQ1000


PQ1000
.
FUCNTIONS: CR800 COMMON RAIL INJECTOR TESET BENCH
1. specifically to detect the high-pressure common rail fuel injector assembly performance, built-in gas drive high pressure generating device.
2. Built-in gas drive high voltage generator, provides stable adjustable 0 ~ 2000 bar high pressure.
3. Detection /denso/Delphi/Siemens etc high pressure common rail injector.
4. Detection common mechanical fuel injector big flow double spring fuel injector.
5. Detection common rail injector open pressure and atomization quality.
6 .Detectable unit of time to single injector of jet flow and oil return flow.
7. Detection of the injector sealing performance.
8. Can set drive signal peak voltage pulse width frequency and injection time.
9.Of the injector can realize single jet and continuous injection.
Feature:
1 Built-in gas drive high pressure generating device
2 Measurement precision
3 High quality at a low price
4 Simple and easy
---Other both colors (we can make color depend on request )


common rail injector test bench(diesel nozzle tester)
Main Voltage(Vac) ;220V
Main Frequency(Hz) :50/60
Max Filling Volume per Tank(lit./gal) :2
Input System pressure(bar/psi):0-10/0-145
System Build-up
Pressure(bar/psi) :0-1800bar/0-26100 psi


box(Size: L*W*H). If export to
european countries,the wooden box
will be fumigated.If container is too
tigher,we will use pe film for packing
or pack it according to customers
special request
To ensure product quality, after-sales service, your satisfaction is our eternal pursuit
Maintenance responsibility
1 normal use, due to product quality problems, within a year of free maintenance.
2 damage is caused due to improper use, user costs of the maintenance cost.
3 product life-long maintenance, 3 packets of a year later, the user costs of the maintenance cost.




Preparatory work before use
1,To test if the CR injector is still function,to connect a CR injector to a high pressure fuel source by a high pressure fuel line and to the CR tester by harness.The tester is set to condition is injection mode.The CR injectors in normal condition,if it is capable to inject fuel under the driving signals by the tester.
2,To test injector spray atomization,to connect a CR injector to a high pressure fuel source by a high pressure fuel line and to the CR tester by harness.The tester is set to single injector mode to allow observing the nozzle spray pattern to judge if the nozzle is normal or orifice plugged.
3,Checking the injection return oil and injection oil.
4,With ultrasonic cleaning tester to clean the nozzle.


























Send Inquiry to This Supplier
You May Also Like
-
High Precision Electric Drying Oven for Material and Component TestingUS$ 1000 - 5000MOQ: 1 Set
-
Shaft Alignment Tool TKSA 51 Large Sized Detectors and Powerful Lasers,quickly Check and Correct Shaft Alignments,very Easy to UseNegotiableMOQ: 100 Pieces
-
Hydraulic Plastic Flange Connections Cover Plugs SHF SeriesUS$ 0.22 - 0.28MOQ: 2500 Pieces
-
Impact Testing MachineUS$ 950 - 1350MOQ: 1 Piece
-
Gates 550C 550U U550 U-550 U508 U-508 Japan Unitta U-550 Belt Tension Meter New U-508 Belt Tension Meter Upgraded Version U550US$ 1 - 900MOQ: 1 Piece
-
Plastic Packaging Film Heat Seal Tester/Laboratory Heat Sealer / Five Points Heat Seal TesterUS$ 9,500 - 10,000MOQ: 1 Set
-
Diesel Fuel Injection Pump Test Bench Simulator System Control InstrumentUS$ 200 - 300MOQ: 1 Set
-
Analytical Balanace.scale ,weichengya Laboratory SupplierUS$ 10 - 35MOQ: 10 Sets
-
Smart MD-3051 Online Density Meter With 4-20mA OutputUS$ 2,380 - 2,500MOQ: 1 Unit
-
5W-300W Sun Simulator Watt Testing 30% Off / Xenon Lamp Sun Simulator Free Sent / Sun Simulator TestingUS$ 7,500 - 10,000MOQ: 1 Set
Recommended Categories
Explore top categories and find suppliers for your specific needs-
sales
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.